- A. In this chapter, the following documents are incorporated by reference.
B. Documents Incorporated.
- (1) SCAQMD Method 304-91 Determination of Volatile Organic Compounds in Various Materials (Revised February 1996).
- (2) ASTM Designation: ASTM D 4457-85 (Reapproved 1996) Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph.
- (3) ASTM Designation: ASTM E 260-91 Standard Practice for Gas Column Chromatography.
- (4) ASTM Designation: ASTM E 260-96 (Reapproved 2006) Standard Practice for Gas Column Chromatography.
- (5) ASTM Designation: ASTM D 3792-79 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph.
- (6) ASTM Designation: ASTM D 3792-86 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph.
- (7) ASTM Designation: ASTM D 2879-86 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope.
- (8) EPA Technical Document “Guidelines for Determining Capture Efficiency”, issued January 9, 1995 (40 CFR Part 51 Appendix M).
- (9) CARB Method 100 Procedures for Continuous Gaseous Emission Stack Sampling (Amended July 28, 1997).
- (10) SCAQMD “General Test Method for Determining Solvent Losses from Spray Gun Cleaning Systems”, dated October 3, 1989.
- (11) SCAQMD Method 316A-92 Determination of Volatile Organic Compounds in Materials Used for Pipes and Fittings (Revised October 1996).
Authority: Environment Article, §§1-101, 1-404, 2-101—2-103, 2-301—2-303, 10-102, and 10-203, Annotated Code of Maryland
Effective date:
Regulations .01—.07 adopted as an emergency provision effective January 11, 2008 (35:3 Md. R. 287); adopted permanently effective April 21, 2008 (35:8 Md. R. 809)
Regulation .01I adopted as an emergency provision effective January 1, 2009 (36:5 Md. R. 420); adopted permanently effective June 1, 2009 (36:11 Md. R. 787)