1. A. Windshield. Visually inspect windshield for:

   Procedures:	Reject Vehicle If:
   (1) Cracks on driver's side.	(1) Any crack is through one or more layers of glass or there are two or more cracks extending from an outer edge into the windshield wiper sweep.
   (2) Cracks on passenger side.	(2) Windshield is cracked so as to restrict vision.
   (3) Chips.	(3) Windshield wiper sweep contains nicks, pits, or chips greater than 1/2 inch diameter.
   (4) Vision.	(4) Vision is obscured by clouding or other conditions.
   (5) Tinting.	(5) Windshield contains any add-on tinting.
   (6) Stickers.	(6) Windshield wiper sweep area contains any stickers.
   (7) Type.	(7) Windshield is not AS-1 or AS-10 laminated safety glazing.
   (8) Presence.	(8) Any part of windshield is missing.

2. B. Side Windows. Inspect for:

   Procedures:	Reject Vehicle If:
   (1) Operation.	(1) Window on driver's side does not open or close.
   (2) Push-out windows .	(2) Manufactured after September 1, 1983 and is not equipped with push-out windows.
   (3) Cracks.	(3) Any window contains a sharp or jagged edge, or is cracked so as to restrict vision.
   (4) Obstructions.	(4) Any window is obstructed to restrict vision.
   (5) Tinting.	(5) Any window to the immediate right or left of the driver contains add-on tinting.
   (6) Type.	6) Any window to the immediate right or left of the driver is not AS-1, AS-2, AS-10, or AS-11 safety glazing, or any other side window is not AS-1, AS-2 AS-3, AS-4, AS-5, AS-10, or AS-11 safety glazing.

Authority: Transportation Article, §§12-104(b) and 23-303, Annotated Code of Maryland

Effective date: January 8, 1990 (16:26 Md. R. 2796)

Regulation .01 amended effective April 1, 1991 (18:6 Md. R. 687)