A. The following systems or controls must be present and in good operating order prior to the issuance of a decal.
1. Aerial and Ground Application Equipment
- a. The hopper must be free of leaks and in good working order; and
- b. all equipment must include a properly functioning pressure gauge(s).
2. Aerial Application Equipment
- a. The booms, nozzles, and hose fittings must be free of leaks;
- b. the emergency dump, if present on an aircraft, must be free of leaks when in the closed position;
- c. there must be a main fluid filter between the main tank and the boom system; and
- d. the distance between the outermost nozzles on the boom of a fixed wing aircraft shall not be more than 75 percent of the wing span of the aircraft. The boom on the rotary-wing aircraft may not exceed the rotor diameter. The commissioner may waive these requirements for specific aircraft.
- 3. secondary containment and containment pads are required for dispensing pesticides from stationary containers.
Authority Note
AUTHORITY NOTE: Promulgated in accordance with R.S. 3:3203 and R.S. 3:3243.
Historical Note
HISTORICAL NOTE: Promulgated by the Department of Agriculture, Advisory Commission on Pesticides, LR 10:198 (March 1984), amended by the Department of Agriculture and Forestry, Advisory Commission on Pesticides, LR 24:281 (February 1998), amended by Department of Agriculture and Forestry, Office of Agricultural and Environmental Sciences, Advisory Commission on Pesticides, LR 37:3483 (December 2011).