Ind. Admin. Code tit. 326, r. 8-21-8
Authority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Sec. 8. (a) Each owner or operator using coatings listed in section 3(a) of this rule shall do the following:
(b) Each owner or operator using cleaning solvents required in section 5 of this rule shall do the following:
(2) For vapor pressure compliant hand wipe cleaning solvents, do the following:
(3) For cleaning solvents with a vapor pressure greater than forty-five (45) mmHg used in exempt hand wipe cleaning operations, do the following:
(c) Each owner or operator using control equipment under section 6 of this rule shall record monitoring parameters as specified in the monitoring plan required under section 6(b) of this rule.
(d) Except for specialty coatings, any source that complies with the substantive record keeping requirements of the aerospace NESHAP, 40 CFR 63.752*, is deemed to be in compliance with the requirements of this section.
*This document is incorporated by reference. Copies may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
(Air Pollution Control Division; 326 IAC 8-21-8; filed Nov 3, 2009, 3:32 p.m.: 20091202-IR-326090222FRA; errata filed Nov 19, 2009, 10:03 a.m.: 20091216-IR-326090222ACA; readopted filed Oct 18, 2024, 2:09 p.m.: 20241113-IR-326230809RFA)