- a) Must meet or exceed the wiring requirements of SAE Recommended Practice J1133.
- b) Must be capable of full operation between, and including, the temperatures -40 degrees F and 160 degrees F.
- c) The arm, when activated, must extend a minimum of five feet from the front face of the bumper.
- d) The arm must be mounted on the far right side (entry side) of the front bumper.
- e) Appropriate brackets shall be used to attach the arm to the front bumper for proper operation and storage.
- f) All component parts must meet or exceed any applicable FMVSS in effect at the time of manufacture.
- g) The arm must extend at the same time the stop arm panel extends. An independent "on/off" switch is prohibited.
- h) If the driver can stop the arm from extending with the use of an optional override switch, the arm sequence must automatically reset once the service door is closed.
- i) Red lights and/or red reflectors are prohibited.
(Source: Amended at 32 Ill. Reg. 18305, effective November 14, 2008)