- a) All urinals shall be either Type 304 stainless steel or vitreous china complying with ASME A112.19.2/CSA B45.1.
b) All stainless steel urinals shall comply with the following:
- 1) The urinal shall be fabricated of Type 304 stainless steel with exposed edges polished.
- 2) All exposed welds are to be ground smooth.
- 3) All construction is to be free from visible voids, seams or crevices.
- 4) The trap shall provide a 2-inch seal and pass a 1.9-inch diameter ball.
- 5) The urinal shall be fitted with an integrally welded steel beehive dome strainer.
(Source: Amended at 38 Ill. Reg. 9940, effective April 24, 2014)