1. a) The following materials are referenced in this Part and are available for inspection at the Department's Springfield office:
2. 1) State and Federal Statutes
3. A) Swimming Facility Act [210 ILCS 125]
4. B) 2011 Internal Revenue Code (26 USC 501)

5. 2) State Administrative Rules

   1. A) Illinois Plumbing Code (77 Ill. Adm. Code 890). (See Sections 820.200(r), 820.2109(c)(1), and 820.210(f)(1)(A).)
   2. B) Regulation of Construction within Flood Plains (17 Ill. Adm. Code 7362). (See Sections 820.10 and 820.100 (b)(3)(A).)
   3. C) Drinking Water Systems Code (77 Ill. Adm. Code 900). (See Section 820.110(a).)
   4. D) Private Sewage Disposal Code (77 Ill. Adm. Code 905). (See Section 820.120.)
   5. E) Food Service Sanitation Code (77 Ill. Adm. Code 750). (See Section 820.130.)
   6. F) Public Water Supplies (35 Ill. Adm. Code: Subtitle F, Chapters I and II). (See Section 820.110(a).)
   7. G) Public Area Sanitary Practice Code (77 Ill. Adm. Code 895). (See Section 820.110(a).)
   8. H) Practice and Procedure in Administrative Hearings (77 Ill. Adm. Code 100) (See Section 820.150(e).)

6. b) The following materials are incorporated in this Part and are available for inspection at the Department's Springfield office:

   1. 1) National Electrical Code (2008 Edition)

      National Fire Protection Association

      1 Batterymarch Park

      Quincy MA 02169

   2. 2) NSF Standard 50, Equipment for Swimming Pools, Spas, Hot Tubs and other Recreational Water Facilities (2012)

      NSF International

      789 N. Dixboro Road

      P.O. Box 130140

      Ann Arbor MI 48113-0140

   3. 3) ANSI Z 34.1 (1993), Third Party Certification Program

      American National Standards Institute

      25 West 43^rd Street

      New York NY 10036

   4. 4) ANSI/APSP 16-2011, Standard Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, and Hot Tubs

      The Association of Pool & Spa Professionals

      2111 Eisenhower Avenue

      Alexandria VA 22314

   5. 5) ASME A112.19.17-2010, "Manufactured Safety Vacuum Release Systems (SVRS) for Residential and Commercial Swimming Pool, Spa, Hot Tub, and Wading Pool Suction Systems"

      The American Society of Mechanical Engineers

      Two Park Avenue

      New York NY 10016-5990

   6. 6) ASTM F2387-04 (2012), "Standard Specification for Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas and Hot Tubs"

      ASTM International

      100 Barr Harbor Dr., P.O. Box C700

      West Conshohocken PA 19428-2959

   7. 7) IAPMO SPS 04-2009, "Special Use Suction Fittings for Swimming Pools, Spas and Hot Tubs (For Suction Side Automatic Swimming Pool Cleaners)"

      The International Association of Plumbing and Mechanical Officials

      4755 E. Philadelphia St.

      Ontario CA 91761

7. c) All incorporations by reference of the standards of nationally recognized organizations refer to the regulations and standards on the date specified and do not include any amendments or editions subsequent to the date specified.

(Source: Amended at 37 Ill. Reg. 16539, effective October 4, 2013)