Ill. Admin. Code tit. 62, § 220.140
a) Man hoists and elevators.
The standards set forth in this Section, apply only to those hoists, elevators, and cable operated cranes, together with their appurtenances, that are used for hoisting men.
b) Automatic controls and brakes.
Hoists and elevators shall be equipped with overspeed, overwind, and automatic stop controls, and with brakes capable of stopping the hoist or elevator when fully loaded.
c) Rated capacity.
Hoists and elevators shall have rated capacities consistent with the loads handled and the recommended safety factors of the ropes and cables used.
d) Ropes and cables; specifications.
The American National Standards Institute "Specifications for the Use of Wire Ropes for Mines", M 11.1-1960, or the latest revision thereof, shall be used as a guide in the use, selection, installation, and maintenance of wire ropes used for hoisting.
e) Maximum load; posting.
The operator shall designate the maximum number of men permitted to ride on each hoists or elevator at one time. This limit shall be posted on each hoist and elevator and on each landing.
f) Inspection and maintenance.
1) Procedures shall be adopted for the uniform daily inspection of all electric hoists, cages, guides, and other equipment associated with the hoisting and lowering of men. Such examinations shall include, but not be limited to, the following:
g) Hoists and cranes; operations.
Hoists and cranes shall be under the control and operated by an experienced operator when persons are being transported, except for automatically operated equipment.
(Source: Amended at 4 Ill. Reg. 48, p. 220, effective December 17, 1980)