1. a) The following information is required for each solid waste management unit at a facility seeking a permit:

   1. 1) The location of the unit on the topographic map required under Section 703.183(s);

2. 2) Designation of the type of unit;

   1. 3) General dimensions and structural description (supply any available drawings);

3. 4) When the unit was operated; and

   1. 5) Specification of all wastes that have been managed at the unit, to the extent available.
   2. b) The owner or operator of any facility containing one or more solid waste management units must submit all available information pertaining to any release of hazardous wastes or hazardous constitutents from such unit or units.

   3. c) The owner or operator must conduct and provide the results of sampling and analysis of groundwater, land surface and subsurface strata, surface water or air, which may include the installation of wells, where the Agency determines it is necessary to complete a RCRA facility assessment that will determine if a more complete investigation is necessary.

      BOARD NOTE: Derived from 40 CFR 270.14(d) (2002).

(Source: Amended at 27 Ill. Reg. 3496, effective February 14, 2003)