1. a) Identification Numbers. A used oil burner that has not previously complied with the notification requirements of RCRA section 3010 must comply with these requirements and obtain a USEPA identification number pursuant to RCRA section 3010 and an Illinois special waste identification number.

2. b) Mechanics of Notification. A used oil burner that has not received a USEPA identification number may obtain one by notifying the Agency of its used oil activity by submitting either of the following:

   1. 1) A completed Notification of RCRA Subtitle C Activities (Site Identification Form) (USEPA Form 8700-12) to the Agency; or

      BOARD NOTE: USEPA Form 8700-12 is available from the Agency, Bureau of Land (217-782-6762). It is also available on-line for download in PDF file format: www.epa.gov/hwgenerators/instructions-and-form-hazardous-waste-generators-transporters-and-treatment-storage-and.

   2. 2) A letter to the Agency requesting a USEPA identification number. The letter should include the following information:

      1. A) The burner company name;
      2. B) The owner of the burner company;
      3. C) The mailing address for the burner;
      4. D) The name and telephone number for the burner point of contact;
      5. E) The type of used oil activity; and
      6. F) The location of the burner facility.
3. c) A used oil burner that has not previously obtained an Illinois special waste identification number may obtain one by contacting the Agency at the following address: Division of Land Pollution Control, Illinois EPA, 2520 West Iles Avenue, PO Box 19276, Springfield, Illinois 62794-9276 (217-782-6761).

(Source: Amended at 49 Ill. Reg. 12736, effective September 23, 2025)