Ill. Admin. Code tit. 32, § 315.TABLE C
| Correction Factor | Wavelength (μm) | |||||||||
| T1 = 10 x 1020l-0.550 | 0.550 to 0.700 | |||||||||
| CB = 1.0 | 0.400 to 0.500 | |||||||||
| CB = 1015 l-0.550 | 0.550 to 0.700 | |||||||||
| CA = 1.0 | 0.400 to 0.700 | |||||||||
| CA = 102 l-0.700 | 0.700 to 1.050 | |||||||||
| CA = 5.0 | 1.050 to 1.400 | |||||||||
| Cp = n-14 | 0.400 to 1000 | |||||||||
| CE = 1.0 a < amin | 0.400 to 1.400 | |||||||||
| CE = a/amin | 0.400 to 1.400 | |||||||||
| Where: amin < a <a max | ||||||||||
| CE = a2/(a max x amin) | 0.400 to 1.400 | |||||||||
| Where: a > amax | ||||||||||
| Cc = 1.0 | 1.050 to 1.150 | |||||||||
| Cc = 1018 l -1.150 | 1.150 to 1.200 | |||||||||
| Cc = 8 | 1.200 to 1.400 | |||||||||
| NOTES: | 1. | For pulse repetition frequencies below 55 kHz (0.4 to 1.05 μm) and below 20 kHz (1.05 to 1.4 μm) see ANSI A136.1. | ||||||||
| 2. | For wavelengths between 0.400 and 1.400 μm: | |||||||||
| amin | = | 1.5 mrad for t ≤ 0.7 s | ||||||||
| amin | = | 2 t¾ mrad for 0.7 s < t <10 s | ||||||||
| amin | = | 11 mrad for t < 10 s | ||||||||
| amax | = | 100 mrad | ||||||||
| 3. | For purposes of this Section 315.Table C, the following abbreviations or symbols are used: | |||||||||
| l | = | wavelength in μm | ||||||||
| n | = | number of pulses | ||||||||
| a | = | angular subtense (mrad) | ||||||||
| t | = | time | ||||||||
| ts | = | time in seconds | ||||||||
| s | = | seconds | ||||||||
| μm | = | micrometers | ||||||||
| Min | = | minimum | ||||||||
| Max | = | maximum | ||||||||
| mrads | = | milliradians | ||||||||
| kHz | = | kilohertz | ||||||||