Ill. Admin. Code tit. 32, § 315.TABLE B
Ultraviolet
| Wavelength (μm) | Exposure Duration, ts | MPE | |
| (J cm-2) | (W cm-2) | ||
| 0.180 to 0.302 | 10-9 to 3 x 104 | 3 x 10-3 | |
| 0.303 | 10-9 to 3 x 104 | 4 x 10-3 | |
| 0.304 | 10-9 to 3 x 104 | 6 x 10-3 | |
| 0.305 | 10-9 to 3 x 104 | 1.0 x 10-2 | |
| 0.306 | 10-9 to 3 x 104 | 1.6 x 10-2 | |
| 0.307 | 10-9 to 3 x 104 | 2.5 x 10-2 | |
| 0.308 | 10-9 to 3 x 104 | 4.0 x 10-2 | |
| 0.309 | 10-9 to 3 x 104 | 6.3 x 10-2 | |
| 0.310 | 10-9 to 3 x 104 | 1.0 x 10-1 | |
| 0.311 | 10-9 to 3 x 104 | 1.6 x 10-1 | |
| 0.312 | 10-9 to 3 x 104 | 2.5 x 10-1 | |
| 0.313 | 10-9 to 3 x 104 | 4.0 x 10-1 | |
| 0.314 | 10-9 to 3 x 104 | 6.3 x 10-1 | |
| 0.315 to 0.400 | 10-9 to 10 | 0.56 t¼ | |
| 0.315 to 0.400 | 10 x 103 | 1 | |
| 0.315 to 0.400 | 103 to 3 x 104 | 1 x 10-3 |
| NOTES: | 1. | To calculate MPE, use the J cm-2 value shown or 0.56 t¼, whichever is lower. |
| 2. | 3.5 mm limiting aperture (see Section 315.Table D). |
Visible and Near Infrared
| Wavelength (μm) | Exposure Duration, ts | MPE | |||
| (J cm-2) | (W cm-2) | ||||
| 0.400 to 1.400 | 10-9 to 10-7 | 2CA x 10-2 | |||
| 10-7 to 10 | 1.1CA t¼ | ||||
| 10 to 3 x 104 | 0.2CA | ||||
| NOTE: | 3.5 mm limiting aperture (see Section 315.Table D). |
Far Infrared
| Wavelength (μm) | Exposure Duration, ts | MPE | |
| (J cm-2) | (W cm-2) | ||
| 1.400 to 103 | 10-9 to 10-7 | 10-2 | |
| 10-7 to 10 | 0.56 t¼ | ||
| >10 | 0.1 |
| NOTE: | See Section 315.Table D for limiting apertures. | |||||
| GENERAL NOTE: | 1. | For purposes of this Table, the following abbreviations are used: | ||||
| μm | = | micrometers | ||||
| ts | = | time in seconds | ||||
| J | = | joules | ||||
| W | = | watts | ||||
| cm | = | centimeters | ||||
| mm | = | millimeter | ||||