Conveyances shall have an inspection performed in accordance with ANSI/ASME standards set forth in section 39-8614 , Idaho Code. The following types of inspections are required:
- (1) Acceptance. The initial inspection and tests of new or altered equipment by a QEI to check for compliance with the applicable code requirements.
- (2) Periodic. Periodic inspection and tests plus additional detailed examination and operation of equipment at specified intervals performed by a QEI to check for compliance with the applicable code requirements. Periodic inspections are required at least every five (5) years.
- (3) Routine. Annual examinations performed in compliance with applicable codes to verify compliance with requirements.
[39-8615, added 2004, ch. 359, sec. 1, p. 1072.]