D.C. Mun. Regs. tit. 20, § 599
599.1 The meanings ascribed to the definitions and abbreviations appearing in §§ 199.1 and 199.2 respectively of Chapter 1 shall apply to the terms and abbreviations in this chapter.
| APPENDIX 5-1 | |||
|---|---|---|---|
| TEST METHODS FOR SOURCES OF VOLATILE ORGANIC COMPOUNDS | |||
| Source Category | EPA Document No. | Control Option | Test Method1 |
| Bulk gasoline terminals | EPA-450/2-77-026 | Add-on2 | Methods 25A, 25B, 2A, 2B Leak tests per methods in EPA-450/2-78-051 |
| Bulk plants | EPA-450/2-77-035 | Vapor balance system3 equipment specifications and operating procedures | Equipment inspection per methods in EPA-450/2-77-035, page 6-3 |
| Cutback asphalt | EPA-450/2-77-037 | Water emulsion Emulsion solvent content | Direct observation by inspector ASTM Distillation Test D-244 |
| Degreasing | Not Applicable | Low volatility VOC solvents Low or no VOC content solvents | ASTM Method D-2879-86 Method 24 |
| Degreasing | EPA-450/2-77-022 | Equipment specifications and operating procedures | Per methods in EPA-450/2-77-022, pages 3-31, 3-33, 3-35, and 7-1 to 7-7 |
| Add-on2 | |||
| External floating roof tanks | EPA-450/2-78-047 | Inspection, maintenance and monitoring | Per methods in EPA-450/2-78-047, pages 5-1 to 5-4 |
| Fixed-roof tanks | EPA-450/2-77-036 | Internal floating roof4 equipment specifications and maintenance requirements | Per methods in EPA-450/2-77-036, page 6-2 |
| Add-on2 | Method 25 | ||
| Gasoline tank trucks | EPA-450/2-78-051 | Pressure-vacuum test | Method 27 or methods in EPA-450/2-78-051, |
| Inspection, maintenance and monitoring | Appendix B Leak tests per methods in EPA-450/2-78-051 Appendix B | ||
|---|---|---|---|
| Graphic arts: rotogravure and flexography | EPA-450/2-78-033 | Low solvent inks, high solids inks | Method 24 or 24A |
| Add on² | Method 25 | ||
| Graphic Arts: Offset Lithography | Not Applicable | Add-on² Low volatility VOC cleaning solutions Low VOC content cleaning solutions Dampening solution | Method 25 or 25A ASTM Method D-2879-86 Method 24 Method 415.1 |
| Manufacture of high density polyethylene, polypropylene and polystyrene | EPA-450/3-83-008 | Add on² | Method 18, 25 or 25A |
| Natural gas/gasoline processing plants | EPA-450/3-83-007 | Inspection, maintenance and monitoring | Method 21 |
| Petroleum dry cleaners | EPA-450/3-82-009 | Operation and maintenance | Per methods in EPA-450/3-82-009, Appendix E |
| Add-on² | Method 25 | ||
| Petroleum refinery equipment leaks | EPA-450/2-78-036 | Inspection, maintenance and monitoring | Method 21 |
| Petroleum refinery vacuum producing systems, wastewater separators and process unit turnarounds | EPA-450/2-77-025 | Equipment specifications and operating procedures | Per methods in EPA-450/2-77-025, page 6-2 |
| Perchloroethylene dry cleaners | EPA-450/2-78-050 | Operation and maintenance | Per methods in EPA-450/2-78-050, pages 6-1 to 6-4 |
| Add-on² | |||
| Pharmaceutical manufacture | EPA-450/2-78-029 | Operation and maintenance | Per methods in EPA-450/2-78-029, page 7-2 |
| Add-on2 | Method 25 | ||
|---|---|---|---|
| Rubber tire manufacture | EPA-450/2-78-030 | Add-on2 | Method 25 |
| Service stations-Stage I | Design criteria document | Vapor balance system3 equipment specifications operating and procedures | Equipment inspection per methods in Design Criteria Document, pages 3 to 6 Leak tests per methods in EPA-450/2-78-051 |
| Surface coating of cans, metal coils, paper, fabric, and automobiles and light-duty trucks | EPA-450/2-77-008 | Low solvent coatings | Method 24 |
| Add-on2 | Method 25 or methods in EPA-450/2-78-041 | ||
| Surface coating of flatwood paneling | EPA-450/2-78-032 | Low solvent coatings | Method 24 or methods in EPA-450/2-78-032, page 5-1 |
| Add-on2 | Method 25 | ||
| Surface coating of large appliances | EPA-450/2-77-034 | Low solvent coatings | Method 24 or methods in EPA-450/2-77-034 pages 5-1 to 5-4 |
| Add-on2 | Method 25 or methods in EPA-450/2-78-041 | ||
| Surface coating of magnetic wire | EPA-450/2-77-033 | Add-on2 | Method 25 or methods in EPA-450/2-78-041 |
| Surface coating of metal furniture | EPA-450/2-77-032 | Low solvent coatings | Method 24 or methods in EPA-450/2-77-032, pages 5-1 to 5-5 |
| Add-on2 | Method 25 or methods in EPA-450/2-78-041 | ||
| Surface coating of miscellaneous metal parts and products | EPA-450/2-78-015 | Low solvent coatings | Method 24 or methods in EPA-450/2-78-015, page 6-1 |
| Add-on2 | Method 25 | ||
| Synthetic organic chemicals manufacturing industry (SOCMI) equipment leaks | EPA-450/3-83-006 | Inspection, maintenance and monitoring | Method 21 |
| Synthetic organic chemicals manufacturing industry (SOCMI) air oxidation unit processes | Add-on2 | Method 18 | |
| Volatile organic liquid storage vessels | Inspection, maintenance and monitoring |
1Methods refer to those found in Appendix A to Part 60 of Title 40 of the Code of Federal Regulations unless otherwise noted.
2Add-on refers to emission control equipment, e.g. incineration, carbon adsorption, refrigeration, refrigeration/compression/absorption, etc.
3Visual inspection except for leaks.
4Visual inspections only.
SOURCE: Section 2 of the Air Pollution Control Act of 1984 National Ambient Air Quality Standards Attainment Amendment Act of 1993, D.C. Law 10-24, 40 DCR 5474, 5479 (July 30, 1993); as amended by Final Rulemaking published at 45 DCR 7037 (October 2, 1998).