- (a) Pumps and pumping equipment shall be installed in the well to make the most efficient use of well storage.
- (b) Pumps and pumping equipment shall be located to permit convenient access for inspection, maintenance and repair.
- (c) In the event the base plate of a pump is placed directly over the well, the base plate shall be of a type designed to form a watertight seal with the well casing or pump foundation, as provided by section 19-13-B51j of the Regulations of Connecticut State Agencies.
- (d) The well shall be properly vented at the well head to allow for pressure changes within the well.
- (e) The electrical wiring used in connection with the pump shall conform to specifications of the Connecticut State Building Code.
- (f) Contaminated water shall not be used for the purpose of priming any pump.
- (g) No connections shall be made between a geothermal system and a water supply well or the water distribution system connected to the water supply well.
(Effective May 21, 1993; Amended July 8, 2022)