- (a) The wheel housing opening shall allow easy access for tire removal and service.
- (b) Wheel housings shall be attached to the floor sheets in such a manner so as to prevent any dust, water or fumes from entering the body. Wheel housings shall be constructed of at least sixteen (16) gauge steel.
- (c) The inside height of the wheel housing above the floor-line shall not exceed twelve inches (12 inches).
- (d) The wheel housing shall provide clearance for installation and use of tire chains on single and dual (if so equipped) power driving wheels.
- (e) No part of a raised wheel housing shall extend into the emergency door opening.
(Adopted effective May 2, 2007)