(a) Inspection of the ocean vessel—(1) Certification to carry livestock. Ocean vessels must be certified by APHIS prior to initial use to transport any livestock from the United States. The owner or the operator of the ocean vessel must make arrangements prior to the vessel's arrival at a designated port of embarkation in the United States for an APHIS representative to inspect the vessel while it is at that port of embarkation. Alternatively, at the discretion of the Administrator and upon request of the exporter, transporting company, or their agent, the inspection may be done at a foreign port. If APHIS determines that the ocean vessel meets the requirements of paragraph (d) of this section, APHIS will certify the vessel to transport livestock from the United States. APHIS may certify a vessel that does not meet all of the requirements in paragraph (d), provided that an exemption from the requirements the vessel does not meet has been granted to the vessel pursuant to paragraph (e) of this section. The certification will specify the species of livestock for which the vessel is approved. The certification will be valid for up to 3 years; however, the ocean vessel must be recertified prior to transporting livestock any time significant changes are made to the vessel, including to livestock transport spaces or life support systems; any time a major life support system fails; any time species of livestock not covered by the existing certification are to be transported; and any time the owner or operator of the ocean vessel changes. The owner or operator of the vessel must present the following documentation to APHIS prior to its initial inspection for certification and when requested by APHIS prior to subsequent inspections for recertification:

1. (i) General information about the vessel, including year built, length and breadth, vessel name history, port of registry, call sign, maximum and average speed, fresh water tank capacity and fresh water generation rate, and feed silo capacity (if the vessel has a silo);
2. (ii) A notarized statement from an engineer concerning the rate of air exchange in each compartment of the vessel;
3. (iii) The species of livestock that the vessel would transport;
4. (iv) Scale drawings that provide details of the design, materials, and methods of construction and arrangement of fittings for the containment and movement of livestock; provisions for the storage and distribution of feed and water; drainage arrangements; primary and secondary sources of power; and lighting;
5. (v) A photograph of the rails and gates of any pens;
6. (vi) A description of the flooring surface on the livestock decks; and
7. (vii) The following measurements: Width of the ramps; the clear height from the ramps to the lowest overhead structures; the incline between the ramps and the horizontal plane; the distance between footlocks on the ramps; the height of side fencing on the ramps; the height of the vessel's side doors through which livestock are loaded; the width of alleyways running fore and aft between livestock pens; and the distance from the floor of the livestock pens to the beams or lowest structures overhead.

8. (2) Prior to each voyage. Prior to loading any livestock intended for export from the United States, an APHIS representative must inspect the vessel to confirm that the ocean vessel has been adequately cleaned and disinfected as required by paragraph (b) of this section, has sufficient food and water for the voyage as required by paragraph (c) of this section, and continues to meet the requirements of paragraph (d) of this section. APHIS will schedule the inspection after the owner or operator of the ocean vessel provides the following information:

   1. (i) The name of the ocean vessel;
   2. (ii) The port, date, and time the ocean vessel will be available for inspection, and estimated time that loading will begin;
   3. (iii) A description of the livestock to be transported, including the type, number, and estimated average weight of the livestock;
   4. (iv) Stability data for the ocean vessel with livestock on board;
   5. (v) The port of discharge; and
   6. (vi) The route and expected length of the voyage.
9. (3) The information in paragraphs (a)(2)(i) through (a)(2)(vi) must be provided at least 72 hours before the vessel will be available for inspection.

(b) Cleaning and disinfection.

1. (1) Any ocean vessel intended for use in exporting livestock, and all fittings, utensils, containers, and equipment (unless new) used for loading, stowing, or other handling of livestock aboard the vessel must be thoroughly cleaned and disinfected to the satisfaction of an APHIS representative prior to any livestock being loaded. The disinfectant must be approved by the Administrator. Guidance on cleaning and disinfecting ocean vessels may be found in the Program Handbook.
2. (2) The Administrator will approve a disinfectant for the purposes of this paragraph upon determining that the disinfectant is effective against pathogens that may be spread by the animals and, if the disinfectant is a chemical disinfectant, that it is registered or exempted for the specified use by the U.S. Environmental Protection Agency. The Program Handbook provides access to a list of disinfectants approved by the Administrator. Other disinfectants may also be approved by the Administrator in accordance with this paragraph. The Administrator will withdraw approval of a disinfectant, and remove it from the list of approved disinfectants in the Program Handbook, if the disinfectant no longer meets the conditions for approval in this section.
3. (3) All ocean vessels, upon docking at a U.S. port to load livestock, must have disinfectant foot baths at entryways where persons board and exit the ocean vessel, and require such baths before allowing any person to disembark.

(d) Accommodations for the humane transport of livestock; general requirements. Ocean vessels used to transport livestock intended for export must be designed, constructed, and managed to reasonably assure the livestock are protected from injury and remain healthy during loading and transport to the importing country. Except as provided below in paragraph (e) of this section, no livestock may be loaded onto an ocean vessel unless, in the opinion of an APHIS representative, the ocean vessel meets the requirements of this section. The Program Handbook contains guidance on ways to meet the requirements. Owners and operators may submit alternative means and methods for meeting the requirements to APHIS for evaluation and approval. Alternatives must be at least as effective in meeting the requirements as those described in the Program Handbook in order to be approved. Alternatives must be approved by APHIS before being used for purposes of this section.

1. (1) Pens. All pens, including gates and portable rails used to close access ways, must be designed and constructed of material of sufficient strength to securely contain the livestock. They must be properly formed, closely fitted, and rigidly secured in place. They must have smooth finished surfaces free from sharp protrusions. They must not have worn, decayed, unsound, or otherwise defective parts. Flooring must be strong enough to support the livestock to be transported and provide a satisfactory non-slip foothold. Pens on exposed upper decks must protect the livestock from the weather. Pens next to engine or boiler rooms or similar sources of heat must be fitted to protect the livestock from injury due to transfer of heat to the livestock or livestock transport spaces. Any fittings or protrusions from the vessel's sides that abut pens must be covered to protect the livestock from injury. Pens must be of appropriate size for the species, size, weight, and condition of the livestock being transported and take into consideration the vessel's route. Animals that may be hostile to each other may not be housed in the same pen.
2. (2) Positioning. Livestock must be positioned during transport so that an animal handler or other responsible person can observe each animal regularly and clearly to ensure the livestock's safety and welfare.
3. (3) Resources for sick or injured animals. The vessel must have an adequate number of appropriately sized and located pens set aside to segregate livestock that become sick or injured from other animals. It must also have adequate veterinary medical supplies, including medicines, for the species, condition, and number of livestock transported.
4. (4) Ramps, doors, and passageways. Ramps, doors, and passageways used for livestock must be of sufficient width and height for their use and allow the safe passage of the species transported. They must have secure, smooth fittings free from sharp protrusions and non-slip flooring, and must not have worn, decayed, unsound, or otherwise defective parts. Ramps must not have an incline that is excessive for the species of livestock transported and must be fitted with foot battens to prevent slippage at intervals suitable for the species. The sides of ramps must be of sufficient height and strength to prevent escape of the species of livestock transported.
5. (5) Feed and water. The feeding and watering system must be designed to permit all livestock in each pen adequate access to feed and water. The system must also be designed to minimize soiling of pens and to prevent animal waste from contaminating feed and water. Similarly, feed must be loaded and stored aboard the vessel in a manner that protects it from weather and sea water and, if kept under animal transport spaces, protects it from spillage from animal watering and feeding and from animal waste. If the normal means of tending, feeding, and watering of livestock on board the ocean vessel is wholly or partially by automatic means, the vessel must have alternative arrangements for the satisfactory tending, feeding, and watering of the animals in the event of a malfunction of the automatic means.
6. (6) Ventilation. Ventilation during loading, unloading, and transport must provide fresh air and remove excessive heat, humidity, and noxious fumes (such as ammonia and carbon dioxide). Ventilation must be adequate for variations in climate and weather and to meet the needs of the livestock being transported. Ventilation must be effective both when the vessel is stationary and when it is moving and must be turned on when the first animal is loaded. The vessel must have on board a back-up ventilation system (including emergency power supply) in good working order or replacement parts and the means, including qualified personnel, to make the repairs or replacements.
7. (7) Waste management. The vessel must have a system or arrangements, including a backup system in working order or alternate arrangements, for managing waste to prevent excessive buildup in livestock transport spaces during the voyage.
8. (8) Lighting. The vessel must have adequate illumination to allow clear observation of livestock during loading, unloading, and transport.
9. (9) Bedding. Bedding must be loaded and stored aboard the vessel in a manner that protects it from weather and sea water and, if kept under animal transport spaces, protects it from spillage from animal watering and feeding and from animal waste.
10. (10) Cleaning. The vessel must be designed and constructed to allow thorough cleaning and disinfection and to prevent feces and urine from livestock on upper levels from soiling livestock or their feed or water on lower levels.
11. (11) Halters and ropes. Halters, ropes, or other equipment provided for the handling and tying of horses or other livestock must be satisfactory to ensure the humane treatment of the livestock.
12. (12) Personnel. The owner or operator of the ocean vessel must have on board during loading, transport, and unloading at least 3 persons (or at least 1 person if fewer than 800 head of livestock will be transported) with previous experience with ocean vessels that have handled the kind(s) of livestock to be carried, as well as a sufficient number of personnel with the appropriate experience to be able to ensure proper care of the livestock. The APHIS representative assigned to inspect the ocean vessel prior to loading will determine whether the personnel aboard the vessel are sufficient and possess adequate experience, including, if necessary, veterinary experience, to ensure proper care of the livestock.
13. (13) Vessel stability. The vessel must have adequate stability, taking into consideration the weight and distribution of livestock and fodder, as well as effects of high winds and seas. If requested by APHIS, the owner or operator of the vessel must present stability calculations for the voyage that have been independently verified for accuracy.
14. (14) Means of humane euthanasia. Ocean vessels must maintain a means of humanely euthanizing sick or injured livestock aboard the vessel. One of the personnel aboard the vessel must be trained in humanely euthanizing livestock by using the means of euthanasia carried by the vessel.
15. (15) Life support systems. The ocean vessel must maintain replacement parts for major life support systems aboard the vessel, and the means, including qualified personnel, to make the repairs or replacements.
16. (16) Additional conditions. The vessel must meet any other condition the Administrator determines is necessary for approval, as dictated by specific circumstances and communicated to the owner and operator of the vessel, to protect the livestock and keep them healthy during loading, unloading, and transport to the importing country.

(f) Operator's report.

1. (1) The owner or operator of any ocean vessel used to export livestock (including vessels that use shipping containers) from the United States must submit a written report to APHIS within 5 business days after completing a voyage. The report must include the name of the ocean vessel; the name and address of all exporters of livestock transported on the vessel; the port of embarkation; dates of the voyage; the port where the livestock were discharged; the number of each species of livestock loaded; the number of each species that died and an explanation for those mortalities; and the number of animals that sustained injuries or sustained illnesses that were significant enough to require medical attention from the personnel entrusted with the care of the animals, as well as the nature of these injuries or illnesses. The report must also document any failure of any major life support system for the livestock, including, but not limited to, systems for providing feed and water, ventilation systems, and livestock waste management systems. Any such failure must be documented, regardless of the duration or whether the failure resulted in any harm to the livestock. The report must include the name, telephone number, and email address of the person who prepared the report and the date of the report. The report must be submitted to APHIS by facsimile or email. Contact numbers and addresses, as well as an optional template for the report, are provided in the Program Handbook.
2. (2) If an ocean vessel used to export livestock experiences any failure of a major life support system for livestock during the voyage, the owner or operator of the ocean vessel must notify APHIS immediately by telephone, facsimile, or other electronic means. Contact numbers and addresses are provided in the Program Handbook.

3. (3) Failure to provide timely reports as required by this section may result in APHIS disapproving future livestock shipments by the responsible owner or operator or revoking the vessel's certification under paragraph (a) of this section to carry livestock.

   (Approved by the Office of Management and Budget under control number 0579-0432)