(c) The RWP manual must document:

1. (1) All elements of the RWP program in Subpart D of this part.
2. (2) A definition of RTA and transit worker responsibilities as described in Subpart C—Responsibilities.
3. (3) Training, qualification, and supervision required for transit workers to access the track zone, by labor category or type of work performed.
4. (4) Processes and procedures, including any use of roadway workers to provide adequate on-track safety, for all transit workers who may access the track zone in the performance of their work, including safety and oversight personnel. Procedures for SSOA personnel to access the roadway must conform with the SSOA's risk-based inspection program.

(d) The RWP manual must include or incorporate by reference a track access guide to support on-track safety. The track access guide must be based on a physical survey of the track geometry and condition of the transit system and include, at a minimum:

1. (1) Locations with limited, close, or no clearance, including locations (such as alcoves, recessed spaces, or other designated places or areas of refuge or safety) with size or access limitations.
2. (2) Locations subject to increased rail vehicle or on-track equipment braking requirements or reduced rail transit vehicle operator visibility due to precipitation or other weather conditions.
3. (3) Curves with no or limited visibility.
4. (4) Locations with limited or no visibility due to obstructions or topography.
5. (5) All portals with restricted views.
6. (6) Locations with heavy outside noise or other environmental conditions that impact on-track safety.
7. (7) Any other locations with access considerations.