(a) Each set of plans under § 159.005-9(a)(5)(ii) for equipment must include the following:

1. (1) An assembly drawing or general arrangement drawing.

2. (2) A description of each component of the equipment that includes the name, the manufacturer, and the part identification of each component in—

   1. (i) A detail drawing;
   2. (ii) A bill of material or parts list; or
   3. (iii) A specification for that component.
3. (3) A list of the drawings and specifications in the set of plans, including each revision, and the date of that list.
4. (4) If a manufacturer's instructions or manual is required in the applicable subpart, a copy of the instructions or manual.