(b) Send to BLM:

1. (1) A detailed description of the equipment, materials, and procedures you will use;
2. (2) The proposed/anticipated depth of the well;

3. (3) If you plan to directionally drill your well, also send us:

   1. (i) The proposed bottom hole location and distances from the nearest section or tract lines;
   2. (ii) The kick-off point;
   3. (iii) The direction of deviation;
   4. (iv) The angle of build-up and maximum angle; and
   5. (v) Plan and cross section maps indicating the surface and bottom hole locations;
4. (4) The casing and cementing program;
5. (5) The circulation media (mud, air, foam, etc.);
6. (6) A description of the logs that you will run;
7. (7) A description and diagram of the blowout prevention equipment you will use during each phase of drilling;
8. (8) The expected depth and thickness of fresh water zones;
9. (9) Anticipated lost circulation zones;
10. (10) Anticipated reservoir temperature and pressure;
11. (11) Anticipated temperature gradient in the area;
12. (12) A plat certified by a licensed surveyor showing the surveyed surface location and distances from the nearest section or tract lines;
13. (13) Procedures and durations of well testing; and
14. (14) Any other information we may require.