Each application by a manufacturer for certification of a road vehicle by design type must include:

1. (a) Three copies, each no larger than 3 feet by 4 feet, of the Customs and TIR plan;
2. (b) Customs and TIR plan number;

3. (c) Three copies of the specifications which include the following information:

   1. (1) The name and address of the manufacturer and the owner; and

   2. (2) A description of the road vehicle including the:

      1. (i) Particulars of construction;
      2. (ii) Dimensions;
      3. (iii) Construction materials; and
      4. (iv) Marks and numbers, including chassis, engine, and registration numbers.

4. (d) A statement signed by the manufacturer that:

   1. (1) It will present vehicles of the type concerned to the Certifying Authority which that Authority may wish to examine;
   2. (2) Permit the Certifying Authority to examine further units at any time during or after the production run;
   3. (3) Notify the Certifying Authority of each change in the design or specifications before adoption;
   4. (4) Mark the road vehicles in a visible place with the identification number or letters of the design type and the serial number of the vehicle in the type series manufacturer's number; and
   5. (5) Keep a record of vehicles manufactured according to the design type.