Each application by a manufacturer or an owner for certification of a container by design type must include:

1. (a) Three copies, each no larger than 3 feet by 4 feet, of the customs and TIR/Container plan;
2. (b) Customs and TIR/Container plan number;

3. (c) Three copies of the specifications which include the following information:

   1. (1) The name and address of the manufacturer and the owner; and

   2. (2) A description of the container including the—

      1. (i) Type of construction;
      2. (ii) Dimensions;
      3. (iii) Material of construction;
      4. (iv) Coating system used;
      5. (v) Identification marks and numbers; and
      6. (vi) Tare weight;
4. (d) The location and date for inspection; and

5. (e) A statement signed by the manufacturer that:

   1. (1) A container of the design type concerned is available for inspection and approval by the Certifying Authority before, during, and after the production run;
   2. (2) Notification will be given to the Certifying Authority of each change in the design before adoption; and

   3. (3) Each container will be marked with:

      1. (i) The metal plate required in § 115.32;
      2. (ii) The identification number or letter of the design type assigned by the manufacturer; and
      3. (iii) The serial number of the container assigned by the manufacturer.