Learn More
Log In
Sign Up
The Standard | Midpage
Collections
Code of Federal Regulations
Title 16
Chapter II
Subchapter B
Part 1209
Subpart A
The Standard
1209.1
Scope and application.
1209.2
Definitions and measurements.
1209.3
General requirements.
1209.4
Test procedures for determining settled density.
1209.5
Test procedures for corrosiveness.
1209.6
Test procedures for critical radiant flux.
1209.7
Test procedures for smoldering combustion.
1209.8
Procedure for calibration of radiation instrumentation.
1209.9
Labeling requirement.
1209.10
Certification and enforcement.
1209.11
Effective date.
Figure 1 to Subpart A of Part 1209
Partial Insulation Preparation Apparatus
Figure 2 to Subpart A of Part 1209
Cyclone Receiver Weldment
Figure 3 to Subpart A of Part 1209
Flooring Radiant Tester Schematic Side Elevation
Figure 4 to Subpart A of Part 1209
Flooring Radiant Panel Tester Schematic Low Flux End, Elevation
Figure 5 to Subpart A of Part 1209
Zero Reference Point Related to Detecting Plane
Figure 6 to Subpart A of Part 1209
Dummy Specimen in Specimen Holder
Figure 7 to Subpart A of Part 1209
Specimen Tray
Figure 8 to Subpart A of Part 1209
Standard Radiant Heat Energy Flux Profile
Figure 9 to Subpart A of Part 1209
Flux Profile Data Log Format
Figure 10 to Subpart A of Part 1209
Insulation Radiant Panel Test Data Log Format