(a) Notwithstanding any other provision of any district permit system, and except as provided in this section, no district shall require emissions offsets for any cogeneration technology project or resource recovery project that satisfies all of the following requirements:

1. (1) The project satisfies one of the following size criteria:

   1. (A) The project produces 50 megawatts or less of electricity. In the case of a combined cycle project, the electrical capacity of the steam turbine may be excluded from the total electrical capacity of the project for purposes of this paragraph if no supplemental firing is used for the steam portion and the combustion turbine has a minimum efficiency of 25 percent.
   2. (B) The project processes municipal wastes and produces more than 50 megawatts, but less than 80 megawatts, of electricity.
2. (2) The project will use the appropriate degree of pollution control technology (BACT or LAER) as defined and to the extent required by the district permit system.
3. (3) Existing permits for any item of equipment to be replaced by the project, whether the equipment is owned by the applicant or a thermal beneficiary of the project, are surrendered to the district or modified to prohibit operation simultaneously with the project to the extent necessary to satisfy district offset requirements. The emissions reductions associated with the shutdown of existing equipment shall be credited to the project as emissions offsets in accordance with district rules.
4. (4) The applicant has provided offsets to the extent they are reasonably available from facilities it owns or operates in the air basin and that mitigate the remaining impacts of the project.
5. (5) For new projects that burn municipal waste, landfill gas, or digester gas, the applicant has, in the judgment of the district, made a good faith effort to secure all reasonably available emissions offsets to mitigate the remaining impact of the project, and has secured all reasonably available offsets.