(a) For purposes of this section, the following terms have the following meaning:

1. (1) “Consumer product” means a chemically formulated product used by household and institutional consumers, including, but not limited to, detergents; cleaning compounds; polishes; floor finishes; cosmetics; personal care products; home, lawn, and garden products; disinfectants; sanitizers; aerosol paints; and automotive specialty products; but does not include other paint products, furniture coatings, or architectural coatings.
2. (2) “Health benefit product” means an antimicrobial product registered with the Environmental Protection Agency.
3. (3) “Maximum feasible reduction in volatile organic compounds emitted” means at least a 60-percent reduction in the emissions of volatile organic compounds resulting from the use of aerosol paints, calculated with respect to the 1989 baseline year, including acetone in that baseline year.
4. (4) “Medical expert” means a physician, including a pediatrician, a microbiologist, or a scientist involved in research related to infectious disease and infection control.

(b) The state board shall adopt regulations to achieve the maximum feasible reduction in volatile organic compounds emitted by consumer products, if the state board determines that adequate data exists to establish both of the following:

1. (1) The regulations are necessary to attain state and federal ambient air quality standards.
2. (2) The regulations are commercially and technologically feasible and necessary.

(h)

1. (1) It is the intent of the Legislature that, prior to January 1, 2000, air pollution control standards affecting the formulation of aerosol adhesives and limiting emissions of reactive organic compounds resulting from the use of aerosol adhesives be set solely by the state board to ensure uniform standards applicable on a statewide basis.
2. (2) The Legislature recognizes that the current state board volatile organic compound (VOC) limit for aerosol adhesives is 75 percent by weight. Effective January 1, 1997, the state board’s 75-percent standard shall apply to all uses of aerosol adhesives, including consumer, industrial, and commercial uses, and any district regulations limiting the VOC content of, or emissions from, aerosol adhesives, are null and void. After that date, a district may adopt and enforce the state board’s 75-percent standard for aerosol adhesives, or a subsequently adopted state board standard, in the same manner as a district regulation limiting the issuance of air contaminants.
3. (3) Notwithstanding any other provision of this section, on and after January 1, 2000, a district may adopt and enforce a regulation setting an emission standard or standards for VOC emissions for the use of aerosol adhesives that is more stringent than the standards adopted by the state board.

(i)

1. (1) It is the intent of the Legislature that air pollution control standards affecting the formulation of aerosol paints and limiting the emissions of volatile organic compounds resulting from the use of aerosol paints be set solely by the state board to ensure uniform standards applicable on a statewide basis. A district shall not adopt or enforce any regulation regarding the volatile organic compound content of, or emissions from, aerosol paints until the state board has adopted a regulation regarding those paints, and any district regulation shall not be different than the state board regulation. A district may observe and enforce a state board regulation regarding aerosol paints in the same manner as a district regulation limiting the issuance of air contaminants. This subdivision shall not apply to any district that has adopted a rule or regulation regarding aerosol paints pursuant to an order of a federal court, until the federal court has authorized the district to observe and enforce the state board regulation in lieu of the district regulation.
2. (2) The state board shall adopt regulations requiring the maximum feasible reduction in volatile organic compounds emitted from the use of aerosol paints. The regulations shall establish final limits and require full compliance, and shall establish interim limits prior to that date resulting in reductions in reactive organic compounds.
3. (3) The state board shall conduct a public hearing on the technological or commercial feasibility of achieving full compliance with the final limits. If the state board determines that a 60-percent reduction in emissions of reactive organic compounds from the use of aerosol paints is not technologically or commercially feasible, the state board may grant an extension of time not to exceed five years. During any extension of time, the most stringent interim limits shall be applicable. Any regulation adopted by the state board shall include a provision authorizing the time extension and requiring a public hearing on technological or commercial feasibility consistent with this subdivision. The state board shall seek to ensure that the final limits for aerosol paints established pursuant to this subdivision do not become federally enforceable prior to the effective date established by the state board for these limits, including any extension granted under this subdivision.
4. (4) Reductions required for aerosol paints under this subdivision are not intended to apply to any other consumer product.