1. (a) Where a guard or enclosure is within 2 inches of moving parts, openings through the guard shall be of such size as will preclude the passage of any object one-half inch in diameter.
2. (b) Where a guard or enclosure is within 4 inches of moving parts, openings through the guard shall be of such size as will preclude the passage of any object greater than one-half inch in diameter.
3. (c) Where a guard is located between 4 inches and 15 inches from moving parts, the maximum opening shall be of such size as will preclude the passage of any object greater than 2 inches in diameter. Where a slatted guard is used, the width of the opening shall be not greater than 1-inch.
4. (d) Standard railing guards shall be placed not less than 15 inches nor more than 20 inches from any moving parts provided; however, that where clearances from other moving parts are less than 15 inches, such parts shall be guarded as required elsewhere in these orders.
5. (e) The use of nylon mesh or materials of equivalent strength with holes not exceeding ½ -inch to modify an existing substandard fan guard is acceptable, provided the combination of the two provides adequate protection and the mesh cannot be pushed into the danger zone during normal use.

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.

History

1. Repealer of Table G-2 and Figure G-8, and renumbering of Table G-3 to Table G-2, filed 11-18-76; effective thirtieth day thereafter (Register 76, No. 47). For prior history, see Register 76, No. 6.

2. Amendment of Section 3944 and repealer of Tables G-1 and G-2, Figures G-1, G-2, G-3, G-4, G-5, G-6, G-7 and new Tables G-1 and G-2, Figures G-1, G-2, G-3, G-4, G-5, G-6, G-7 filed 5-4-77 as an emergency; effective upon filing. Certificate of Compliance as to Table G-1 included (Register 77, No. 19).

3. Editorial correction in Figure G-1 and Certificate of Compliance as to 5-4-77 filing filed 8-31-77 (Register 77, No. 36).

4. Repealer of Table G-2 filed 12-19-78; effective thirtieth day thereafter (Register 79, No. 1).

5. Amendment of Section 3944 and Tables G-1, G-2 and Figure G-7 filed 10-9-85; effective thirtieth day thereafter (Register 85, No. 44)

6. Editorial correction of Figure G-2 and deletion of duplicate Note and History Notes (Register 95, No. 24).

7. Change without regulatory effect providing more legible illustrations for Figures G-1 through G-7 filed 2-18-2009 pursuant to section 100, title 1, California Code of Regulations (Register 2009, No. 8).