Cal. Code Regs. tit. 8, § 3060
(c) Bracket Spacing, Stresses, Deflections, and Maximum Loading.
(2) The stresses and deflections in the car guide rails and in their brackets, fastenings, and supports due to the horizontal forces imposed on the rail during loading, unloading, and running, based on the bracket spacing used, shall conform to Design Section 3109(a).
Where, for the rail section used, the stresses exceed those therein specified, the rail section shall be reinforced to limit the stresses and deflections to the amount specified.
(f) Guide Rail Brackets and Building Supports and Their Fastenings. The guide rail brackets, building supports, and their fastenings shall conform to the applicable requirements of Sections 3030(k) and 3030(l).
Exception: The seismic forces referred to in Section 3030(k)(1)(C).
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.
1. New exception in subsection (f) filed 12-22-78; effective thirtieth day thereafter (Register 79, No. 1).
2. Amendment of Note filed 12-8-86; effective thirtieth day thereafter (Register 86. No. 50).