1. (a) All piping, fittings, hangers, braces and supports, automatic sprinklers, valves, gauges and other materials or devices necessary to assemble a fire sprinkler system must conform to the requirements of NFPA 13D for the types of materials, for the standards with which the materials comply, and for the listing and labeling with which the materials and equipment must comply.
2. (b) Residential sprinklers must be listed as complying with UL 1626, “Residential Sprinklers for Fire Protection Service,” 2008 edition, as published by Underwriter's Laboratories and hereby incorporated by reference.

3. (c) The person installing the fire sprinkler system must obtain any applicable manufacturer's installation instructions, when such instructions are issued by the manufacturer.

   1. (1) The person installing the fire sprinkler system must install all materials and devices as required by the manufacturer's installation instructions.
   2. (2) The person installing the fire sprinkler system must make the manufacturer's installation instructions available to the inspector from the Quality Assurance Agency or to the inspector from the department for use during the inspection required by section 4308.

Note: Authority cited: Sections 18015, 18025, 18029 and 18029.5, Health and Safety Code. Reference: Sections 18015, 18025, 18029, 18029.5 and 18030.5, Health and Safety Code.

History

1. New section filed 1-17-2001; operative 1-17-2001 pursuant to Government Code section 11343.4(c) (Register 2001, No. 3).

2. Amendment of section heading and subsection (b), repealer of subsection (c) and subsection relettering filed 2-10-2011; operative 3-12-2011 (Register 2011, No. 6).