- (a) Drain connectors and fittings for recreational vehicles shall be listed and approved for drain and waste.
- (b) Recreational vehicles located in a park for more than 3 months, or units with plumbing that are not self-contained, shall be connected to the lot drain inlet by means of a drain connector consisting of approved pipe not less than schedule 40, with listed and approved fittings and connectors, and shall not be less in size than the unit drain outlet. A listed and approved flexible connector shall be provided at the lot drain inlet end of the pipe.
- (c) A drain connector shall be gas-tight and no longer than necessary to make the connection between the unit's drain outlet and the drain inlet on the lot.
- (d) Vehicles occupying lots without drain inlets shall have the drain outlet of the vehicle capped gas-tight, unless discharged into an approved, closed, vented container.
Note: Authority cited: Section 18865, Health and Safety Code. Reference: Sections 18871 and 18873.1, Health and Safety Code.
History
1. New section filed 7-6-2004; operative 7-6-2004 pursuant to Government Code section 11343.4 (Register 2004, No. 28).