Cal. Code Regs. tit. 21, Div. 2.5 Table 2
Runway Safety Area Dimensions
State of California
| Airplane Design Group |
| DIM4 | ||||||
| I5 | I | II | III | IV | ||
| Runway Safety | ||||||
| Area Width | A | 120 ft | 120 ft | 150 ft | 300 ft | 500 ft |
| Runway Safety | ||||||
| Area Length beyond | B | 240 ft | 240 ft | 300 ft | 600 ft | 1000 ft |
| end of Runway6 |
4 These letters correspond to the dimensions on Figure 2.
5 These dimensional standards pertain to facilities for small airplanes exclusively. “Small airplane” means an airplane of 12,500 pounds or less maximum certificated takeoff weight.
6 The runway safety area length begins at each runway end if there is no stopway provided. When stopway is provided, the length begins at the stopway end.