Cal. Code Regs. tit. 17, § 91201 – Source Testing Fee Schedule.

(a) Whenever the Executive Officer finds that it is necessary to determine compliance of any source with permit conditions or with any State or local law, order, rule, or regulation relating to air pollution, including confirmation of the reliability, accuracy and precision of any in-stack monitoring equipment, he or she may require the testing of such source by qualified personnel of the State Board, by an independent contractor to the State Board, or by an independent tester specified by the responsible party upon approval by the Executive Officer.
(b) For testing conducted by the State Board's personnel or an independent contractor to the Board, the responsible party shall pay a fee in accordance with the following schedule to cover the cost of planning, preliminary evaluation, sampling, sample analysis, calculations, and report preparation with respect to samples of emissions secured from the source. The fees listed in the schedule shall be the maximum fees and shall be reduced by the Executive Officer if the actual cost to conduct a specific test is less. Fees for any compliance test not listed in the schedule shall be determined by the Executive Officer based on the cost to conduct the test.
Estimated Costs to Perform Source Tests and Other Special Tests¹
Type of Test
Fee
Continuous Analyzer Gaseous Emissions Test ¹ with Van
$1,620.00 plus $55.00/hour
Non-continuous Emission Testing ¹
1,230.00 plus specific sample fee listed below
Particulate Matter Test
230.00/sample
Sulfur Dioxide Test
145.00/sample
Sulfuric Acid Mist (including sulfur trioxide) and Sulfur Dioxide Test
205.00/sample
Oxides of Nitrogen Test
90.00/sample
Hydrogen Sulfide Test
120.00/sample
Fluorides Test
400.00/sample
Carbon Monoxide Test
70.00/sample
Total Hydrocarbon Test
60.00/sample
Gas Chromatographic Analysis of Unknown Pollutants
110.00/sample
Vinyl Chloride Test
100.00/
Reid Vapor Pressure Test
45.00/test
Ambient Vinyl Chloride Test
100.00/sample
Visible Emission Evaluation Test
450.00/evaluation
Particulate Fallout Testing
75.00/sample
Floating Roof Tank Inspection
185.00/inspection
Vapor Recovery System Inspection
70.00-2,170.00/inspection
Valve and Flange Leak Test
1.75/test
Laboratory Fuel Analysis
Carbon, Hydrogen, Nitrogen and Sulfur
30.00/sample
Ash
75.00/sample
Density
60.00/sample
Heat Content
180.00/sample
Water
75.00/sample
Asphaltenes
75.00/sample
Distillation
50.00/sample
Metals
295.00/sample
Bromine Number
50.00/sample
Lead
15.00/sample
Other Laboratory Analysis
Water, Volatile Organic Compounds and Density (paints)
50.00/sample
Methane
40.00/sample
Total Hydrocarbon
30.00/sample
Hydrocarbons (with one to nine carbons)
55.00/sample
Molecular Weight Determination of Vapor Hydrocarbons
75.00/sample
Molecular Weight Determination of Liquid Hydrocarbons
50.00/sample
Hydrogen Sulfide
30.00/sample
Percent Water
30.00/sample
Asbestos (air filter sample)
444.00/sample
Particle Size Distribution Optical Microscopy
148.00/sample
Particle Size Distribution Electron Microscopy
296.00/sample
Notes:
^1. Source test fees may also include additional cost of laboratory analysis as required.

Note: Authority cited: Sections 39600, 39601 and 41512, Health and Safety Code. Reference: Sections 41510, 41511 and 41512, Health and Safety Code.