1. (a) Applicability.

   This section shall apply to 2019 and subsequent model year certified engine packages used in a SPMV.

2. (b) Recall Procedures.

   An engine manufacturer shall be notified whenever the Executive Officer has determined, based on emissions warranty information reports, enforcement testing results, or any other information, that more than four percent of the certified engine packages covered under each Executive Order, or more than four percent of California-certified engine packages produced by the engine manufacturer and having the same components as the certified engine package, although properly maintained and used, contain a failure in an emission-related component which, if uncorrected, may result in the vehicles' or engines' failure to meet applicable standards. In such a situation, the certified engine package and/or specific components used in the certified engine package or ECS will be subject to corrective action, including recall, to correct such failures, as specified in the “Procedures for Reporting Failure of Emission-Related Components,” sections 2141 through 2149, Article 2.4, Chapter 2, Division 3, title 13, CCR.

3. (c) OBD Enforcement Procedures

   1. (1) The enforcement provisions of section 1968.5 (b)(6)(C)(ii)a. do not apply for the gasoline evaporative system monitor readiness status.
   2. (2) The mandatory recall provisions of section 1968.5 (c)(3)(A)(iv) do not apply for a missing gas cap.

   For vehicles using a capless fuel storage system, the engine manufacturer shall be subject to the OBD enforcement requirements specified in section 1968.5, title 13, CCR except as provided in subsections (c)(1) and (2).

Note: Authority cited: Sections 39600, 39601, 43000, 43100, 43101, 43102, 43104 and 43105, Health and Safety Code. Reference: Sections 39002, 39003, 43000, 43100, 43101, 43102, 43104, 43105, 43106 and 43205, Health and Safety Code; and Section 580, Vehicle Code.

History

1. New section filed 8-5-2019; operative 10-1-2019 (Register 2019, No. 32).