1. A. A manufacturer shall comply with the standards in R4-34-102 when preparing a reconstruction plan.

2. B. A manufacturer preparing a reconstruction plan shall ensure the plan contains the following:

   1. 1. A depiction of the configuration before reconstruction;
   2. 2. The serial or identification number of the unit;
   3. 3. Dimensioned drawings and details identifying all components and specification lists affected by the reconstruction. Electrical, plumbing, gas, and HVAC systems, as applicable, shall be addressed; and
   4. 4. Design-analysis calculations for all loads and systems affected by the reconstruction.
3. C. A manufacturer shall include with a reconstruction plan a certification statement regarding existing components, construction, and systems indicating they are structurally sound, functional, and do not pose a life safety threat.

Historical Note

Adopted effective January 31, 1979 (Supp. 79-1). Amended subsection (F) effective August 28, 1980 (Supp. 80-4). Amended effective October 20, 1981 (Supp. 81-5). Amended effective April 5, 1985 (Supp. 85-2). Former Section R4-34-704 renumbered to R4-34-304, new Section R4-34-704 renumbered from R4-34-304 and amended effective July 3, 1991 (Supp. 91-1). Section repealed by final rulemaking at 6 A.A.R. 47, effective December 8, 1999; new Section adopted by final rulemaking at 6 A.A.R. 145, effective December 8, 1999 (Supp. 99-4). Amended by final rulemaking at 11 A.A.R. 464, effective March 5, 2005 (Supp. 05-1). Amended by final rulemaking at 14 A.A.R. 286, effective March 8, 2008 (Supp. 08-1). Amended by final rulemaking at 18 A.A.R. 944, effective June 4, 2012 (Supp. 12-2). Amended by final rulemaking at 24 A.A.R. 1499, effective June 30, 2018 (Supp. 18-2). Amended by final rulemaking at 26 A.A.R. 1509, effective September 6, 2020 (Supp. 20-3).