Any stationary source subject to this part shall, as required by federal law and upon request of the Division of Environmental Quality:

1. (1)

   1. (A) Install, calibrate, operate, and maintain equipment to continuously monitor or determine federally regulated air pollutant emissions in accordance with:

      1. (i) Applicable performance specifications in 40 C.F.R. pt. 60, Appendix B, as of the effective date of the federal final rule published by the United States Environmental Protection Agency in the Federal Register on February 27, 2014 (79 FR 11271);
      2. (ii) Quality assurance procedures in 40 C.F.R. pt. 60, Appendix F, as of the effective date of the federal final rule published by the United States Environmental Protection Agency in the Federal Register on February 27, 2014 (79 FR 11274); and
      3. (iii) Other methods and conditions that the division, with the concurrence of the United States Environmental Protection Agency, shall prescribe.
   2. (B) Any source listed in a category in 40 C.F.R. pt. 51, Appendix P, as of the effective date of the federal final rule published by the United States Environmental Protection Agency in the Federal Register on November 7, 1986 (51 FR 40675), or in 40 C.F.R. pt. 60 as of August 30, 1992, shall adhere to all continuous emissions monitoring or alternative continuous emission monitoring requirements stated therein, if applicable; and
2. (2) Report the data collected by the monitoring equipment to the division at such intervals and on such forms as the division shall prescribe, in accordance with 40 C.F.R. pt. 51, Appendix P, Section 4.0 (Minimum Data Requirements) as of the effective date of the federal final rule published by the United States Environmental Protection Agency in the Federal Register on November 7, 1986 (51 FR 40675), and any other applicable reporting requirements promulgated by the United States Environmental Protection Agency.