(a)

1. (1) When automatic or automated transmission is used, it shall provide for not less than:

   1. (A) Three (3) forward speeds; and
   2. (B) One (1) reverse speed.
2. (2) The shift selector, if applicable, shall provide a detent between each gear position when the gear selector quadrant and shift selector are not steering column mounted.
3. (3) The transmission shall meet the manufacturer's specifications.
4. (4) Automatic or automated transmission is a base specification on all units.

(b)

1. (1) The gear ratio will need to be specified by the local school district representative.
2. (2) Otherwise, the manufacturer standard gear ratio will be delivered.
3. (3) District representative should consult with area mechanics to determine the proper gear ratio for local terrain and use of the unit.