- (a) When curb and gutter sections are proposed along a highway with existing sidewalks, the sidewalks will be replaced in accordance with this policy.
(b)
- (1) When curb and gutter sections are proposed along a highway with no existing sidewalks, sidewalks will be constructed on both sides of the roadway in developed areas.
- (2) In undeveloped areas, sidewalks will be considered on one (1) side of the roadway unless evidence of pedestrian traffic warrants sidewalks on both sides of the roadway.
- (c) All sidewalk construction will conform to the latest edition of the Americans with Disabilities Act Accessibility Guidelines (ADAAG).
(d)
- (1) The minimum sidewalk width will be five feet (5’), and the minimum offset from the back of the curb to the sidewalk edge will be three feet (3’).
- (2) No obstructions (mailboxes, signs, etc.) will be allowed in the sidewalk.
- (3) The minimum vertical clearance to the bottom of any obstruction overhanging the sidewalk will be eighty inches (80”).
- (e) If local or regional design standards specify pedestrian facility widths greater than the standards shown above, the additional right-of-way and construction costs associated with the greater width will normally be funded by the local jurisdiction that adopted the higher design standards.