1. (a) Every new system shall receive a General Information Placard and Hydraulic Information Placard, as described in NFPA 13 and 25, that is to be placed in plain view on the system riser.
2. (b) Where remodeled areas create a more hydraulically demanding area, the hydraulic placard shall be updated and replaced.

3. (c) Placards shall meet the following requirements:

   1. (1) The placards shall be no less than two thousandths of an inch (0.002”) in thickness and shall be made of aluminum foil or more rigid material;
   2. (2) Size shall be no less than five inches (5”) wide by seven inches (7”) long;

   3. (3) The wording on the General Information Placard and the Hydraulic Information Placard shall:

      1. (A) Be per NFPA 13 or its appendix;
      2. (B) Also contain the following information:

4. (i) The statement “DO NOT REMOVE, DESTROY OR OBSTRUCT BY ORDER OF THE STATE FIRE MARSHAL” in bold type and font size shall be no smaller than sixteen (16);

   1. (ii) RME name and number;

      1. (iii) Company certificate of registration number;

         1. (iv) Arkansas contractor’s license number; and
         2. (v) Fire sprinkler company:
5. (a) (a) Name;

6. (b) (b) Address; and

   1. (c) (c) Telephone number; and

      1. (C) Be legible and permanent so as not to rub off.

Codification Notes: NFPA 13 is the Standard for the Installation of Sprinkler Systems produced by the National Fire Protection Association. NFPA 25 is the Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems produced by the National Fire Protection Association.