1. (a) The board may issue permits to any person, who is a citizen of the United States or, if not a citizen of the United States, is legally present in the United States with appropriate documentation from the federal government, to engage in or continue the business of selling, distributing, storing, or transporting liquefied petroleum gases and to engage in or continue the business of installing, servicing, repairing, removing, or adjusting liquefied petroleum gas containers, tanks, or systems or to perform magnetic, hydrostatic, visual, or X-ray inspections of liquefied petroleum gas storage containers, cargo tanks, motor fuel containers, and cylinders in the State of Alabama; and to prescribe the requirements of any person to obtain the permits. The board may revoke any permit issued, for cause, in the opinion of the board.

2. (b) The permits shall be of 10 types:

   1. (1) PERMIT A. Shall give the holder a right to engage in or continue the business of selling, distributing, storing, or transporting liquefied petroleum gases and to engage in or continue the business of installing, servicing, repairing, or adjusting liquefied petroleum gas containers, tanks, or systems at retail or installing, repairing, servicing, removing, or adjusting liquefied petroleum carburetion equipment, or to perform magnetic, hydrostatic, visual, or X-ray inspections of liquefied petroleum gas storage containers, cargo tanks, motor fuel containers, and cylinders. Before any person engages in or continues the business of selling, distributing, storing, or transporting liquefied petroleum gases, except where the liquefied petroleum gas so handled is in quantities of less than one gallon U.S. water capacity and is an integral part of a device for its utilization, or before any person engages in the business of installing, servicing, removing, repairing, or adjusting liquefied petroleum gas containers, tanks, or systems at retail or installing, repairing, servicing, removing, or adjusting liquefied petroleum carburetion equipment, or to perform magnetic, hydrostatic, visual, or X-ray inspections of liquefied petroleum gas storage containers, cargo tanks, motor fuel containers, and cylinders in the State of Alabama, the person shall first obtain from the board a Permit A and shall execute and file with the board the insurance as herein required. The holder of a Permit A shall ensure that only trained and qualified personnel perform the functions approved by the permit.

      In addition to the requirement of possessing a Class A permit, persons doing business as or in a name other than the name listed on the Class A permit shall be required to have a separate Class B-1 permit unless the person doing business as or in another name has a separate Class A permit for each business.

   2. (2) PERMIT B. Shall give the holder a right to engage in or continue the business of transporting, storing, distributing, and/or selling liquefied petroleum gas at wholesale or in unit quantities of 5,000 gallons or more at retail to end users or act as wholesale distributors, suppliers, or agents thereof or act as a consignor or shipper that delivers or causes LP-gas to be delivered in the State of Alabama. Before any person engages in or continues the business of transporting, storing, distributing, and/or selling liquefied petroleum gas at wholesale in any quantity to retailers or retail to end users in unit quantities of 5,000 gallons or more or to other wholesaler distributors, suppliers, or agents thereof in the State of Alabama and not being a holder of a Permit A, the person shall first obtain from the board a Permit B and shall execute and file the insurance as required herein, except that those wholesale distributors, suppliers, consignors, shippers, or agents thereof who only sell liquefied petroleum gas at wholesale and transport no gas in the state shall not be required to file a motor vehicle liability certificate of insurance with the board. Class B permit holders shall keep records and shall report monthly, and at all other times as the board shall deem necessary, all sales of liquefied petroleum gas made to retailers, end users, and to other wholesale distributors, suppliers, or agents in this state. Failure to make timely reports and pay required fees shall cause interest and penalties to be assessed as described in Section 9-17-109. Any person possessing a valid Class A permit shall not be required to obtain a Class B permit. The holder of a Permit B shall ensure that only trained and qualified personnel perform the functions approved by the permit.

   3. (3) PERMIT B-1. Shall give the holder a right to operate an individual branch, division, or subdivision or to act as an agent of a Class A permit holder to engage in or continue the business of selling, storing, or transporting liquefied petroleum gases at retail and to engage in or continue the business of installing, servicing, repairing, removing, or adjusting liquefied petroleum gas containers, tanks, or systems at retail or to install, repair, remove, service, or adjust liquefied petroleum carburetion equipment, or to perform magnetic, hydrostatic, visual, or X-ray inspections of liquefied or petroleum gas storage containers and cylinders. Certified representatives of Class A or B-1 permit holders who only operate retail cylinder exchange stations shall not be required to obtain a Class B-1 permit, but shall be certified as representatives on forms provided by the board before installation of any equipment. Cylinder exchange stations shall operate under the permit and insurance of the sponsoring Class A or B-1 permit holder. Certification forms for retail cylinder exchange stations shall only be submitted to the board for installations that are in compliance with all applicable codes at the time of installation.

      Existing retail, off-premise cylinder filling stations formerly certified as authorized agents of a Class A or B-1 permit holder shall obtain a Class F permit on or before August 1, 2015, to continue operations. No permit holder may supply LP-gas to any retail, off-premise cylinder filling station that is required to possess a Class F permit without verification of a current Class F permit with the board.

      Before any person engages in or continues in the operation of an individual branch, division, or subdivision or acts as an agent of a valid Class A permit holder to sell, store, or transport liquefied petroleum gas and to install, service, repair, or adjust liquefied petroleum gas containers, tanks and systems at retail, or to install, repair, service, remove, or adjust liquefied petroleum carburetion equipment, or to perform magnetic, hydrostatic, visual, or X-ray inspections of liquefied petroleum gas storage containers, cargo tanks, motor fuel containers and cylinders, the person shall first obtain from the board a Permit B-1, meet the minimum storage requirements set out in Section 9-17-107, and shall execute and file with the board the insurance as herein required. Branches that were in operation when this article became law shall not be required to meet the storage requirement of Section 9-17-107. A Class B-1 permit holder shall not be required to file or maintain separate or additional insurance as specified by this section provided that the Class B-1 permit holder is included in the parent company’s Class A permit insurance on file with the board. The holder of a Permit B-1 shall ensure that only trained and qualified personnel perform the functions approved by the permit.

   4. (4) PERMIT C. Shall give the holder a right to engage in or continue the business of installing, servicing, repairing, removing, or adjusting liquefied petroleum gas piping and installing, servicing, repairing, removing, or adjusting liquefied petroleum gas appliances on the down stream side of the tank outlet valves only. Before any person engages in or continues the business of installing, servicing, repairing, removing, or adjusting liquefied petroleum gas piping, and installing, servicing, repairing, removing, or adjusting liquefied petroleum gas appliances on the down stream side of the tank outlet valves only, and not being a holder of a Permit A and B-1, the person shall first obtain from the board a Permit C and execute and file with the board the insurance as herein required. A separate permit shall be required for each business location. The holder of a Permit C shall ensure that only trained and qualified personnel perform the functions approved by the permit.
   5. (5) PERMIT C-1. Shall give the holder a right to engage in or continue the business of installing, servicing, repairing, removing, or adjusting any liquefied petroleum gas motor fuel carburetion equipment, the repair of appurtenances on motor fuel containers, cylinders, or carburetion components. Before any person engages in or continues the business of installing, servicing, repairing, removing, or adjusting liquefied petroleum gas motor fuel carburetion equipment, the repair of appurtenances on motor fuel containers, cylinders, or carburetion components in the State of Alabama, the person shall execute with the board the insurance herein required. Class A or B-1 permit holders shall not be required to obtain a Permit C-1. A separate permit shall be required for each business location. The holder of a Permit C-1 shall ensure that only trained and qualified personnel perform the functions approved by the permit.
   6. (6) PERMIT C-2. Shall give the holder a right to engage in or continue the business of performing magnetic, hydrostatic, visual or X-ray inspections of liquefied petroleum gas storage containers, cargo tanks, motor fuel containers and cylinders. Before any person engages in or continues the business of performing magnetic, hydrostatic, visual, or X-ray inspection of liquefied petroleum gas storage containers, cargo tanks, motor fuel containers, and cylinders in the State of Alabama and not being a holder of a Permit A or B-1 the person shall obtain a Class C-2 Permit and execute with the board the insurance herein required. A separate permit shall be required for each business location. The holder of a Permit C-2 shall ensure that only trained and qualified personnel perform the functions approved by the permit.

   7. (7) PERMIT D. Shall give the holder a right to engage in or continue the business of installing and/or repairing, or removal, of bulk storage systems of 5,000 gallons water capacity or more in single containers or in an aggregate of 5,000 gallons water capacity of a multi-container installation only. Before any person engages in or continues the business of installing bulk storage systems of 5,000 gallons water capacity or more in single containers or in a multi-container installation of an aggregate of 5,000 gallons water capacity, in the State of Alabama and not being a holder of a Permit A, the person shall first obtain from the board a Permit D and shall execute and file with the board the insurance as herein required. The holder of a Permit D shall ensure that only trained and qualified personnel perform the functions approved by the permit.

      The board shall require holders of a Permit D to submit plans for any proposed installation of any liquefied petroleum gas storage facility they are planning to install that is authorized under the terms of their permit. They shall obtain approval for the location and for the plans from the administrator of the board before construction is begun. All facilities shall be constructed according to rules and regulations of the board and the completed unit shall have board approval before being used. A minimum fee of two hundred dollars ($200) shall be paid to the board at the time the plans for each facility are presented for approval. This fee of two hundred dollars ($200) will cover examination of the plans and one site inspection. An additional fee of fifty dollars ($50) for each inspection trip to the site that is required shall be paid to the board before final approval is given for the facility to be used. These fees may be changed by action of the board.

   8. (8) PERMIT E. Shall give the holder a right to engage in or continue the business of calibration and/or repair of liquefied petroleum gas liquid meters.

      Before any person engages in or continues the business of calibration, or repair, or both, of liquefied petroleum gas liquid meters, in the State of Alabama and not being a holder of a Permit A, that person shall first obtain from the board a Permit E and shall execute and file with the board the insurance as herein required. The holder of a Permit E shall ensure that only trained and qualified personnel perform the functions approved by the permit.

   9. (9) PERMIT F. Shall give the holder the right to engage in or continue the retail business of filling LP-gas cylinders or LP-gas motor fuel containers, or both, of less than 351 pounds water capacity from a stationary filling station. Before any person engages in or continues in the business of filling LP-gas cylinders or LP-gas motor fuel containers, or both, and not being a holder of a Permit A or Permit B-1, the person shall first obtain from the board a Permit F and shall execute and file with the board the insurance as herein required. Owners of businesses that hold a Permit F shall ensure that only trained, qualified personnel fill cylinders that contain LP-gas. A separate permit and insurance certificate shall be required for each filling station. End users filling cylinders only for their own use shall not be required to obtain a Class F permit.
   10. (10) PERMIT F-1. Shall give the holder the right to engage in or continue in the business of selling or filling welding or cutting gases as defined in subdivision (7) of Section 9-17-100 or selling or filling LP-gas cylinders or LP-gas motor fuel containers, or both, of less than 351 pounds water capacity from a stationary filling station and to transport welding or cutting gases, LP-gas cylinders, or LP-gas motor fuel containers, or any combination of these. To qualify for a Class F-1 permit, the applicant shall be in the business of selling welding or cutting gas supplies and shall meet all state and federal regulations for the transportation of LP-gas. Holders of a Permit F-1 shall not transport LP-gas in any bulk quantity. Holders of a Permit F-1 shall not operate off-premise retail cylinder exchanges or any type of off-premise cylinder filling stations. Owners of businesses that hold a Permit F-1 shall ensure that only trained, qualified personnel fill or transport containers or cylinders that contain LP-gas. Before any person engages in or continues in the business of selling, transporting, or filling welding or cutting gases, LP-gas cylinders, LP-gas motor fuel containers, or any combination of these, when the person is not a holder of either a Permit A or Permit B-1, the person shall first obtain from the board a Permit F-1 and shall execute and file with the board the insurance as herein required. A separate permit and insurance certificate shall be required for each distribution location.
   11. (11) TEMPORARY AUTHORIZATION TO OPERATE. The administrator may issue temporary authorization to operate for Class B, B-1, C, C-1, C-2, D, E, F, and F-1 applicants as soon as all permit issuance requirements have been completed. The temporary authorization to operate shall remain in effect until the next regular board meeting, unless the board extends the effective date of any such temporary authorization to operate by official action.
3. (c) Upon abolition of the LP-Gas Recovery Fund, the remaining funds in the account shall be transferred to the board at the beginning of the next fiscal year.

4. (d) An applicant for any of the 10 permits shall provide the board with evidence of minimum insurance coverage by an insurance company or companies licensed to do business in the state. Proof of insurance shall only be accepted on a form approved by the Alabama Department of Insurance. In the absence of proof of minimum insurance requirements, new permits shall not be issued, and existing permits shall be automatically cancelled. The permit may be reinstated if current proof of insurance is provided within six months of cancellation. After a permit has been cancelled for six months, a new permit shall be applied for in the manner previously set by the board. The minimum insurance requirements are as follows:

   1. (1) Commercial general liability insurance for all 10 permits:

      1. a. One million dollars ($1,000,000) - each occurrence.
      2. b. One million dollars ($1,000,000) - personal and advertising injury.
      3. c. One million dollars ($1,000,000) - general aggregate.
      4. d. One million dollars ($1,000,000) - products and completed operations aggregate.

   2. (2) Commercial automobile liability insurance for A, B, B-1, E, and F-1 permits:

      1. a. One million dollars ($1,000,000) - combined single limit.
      2. b. Five million dollars ($5,000,000) - combined single limit or in combination with umbrella coverage for cargo vehicles with 3,500 gallon water capacity, or more.
5. (e) Any state, county, or any incorporated municipality or agency, or instrumentality thereof and any industrial user who makes application and possesses a Class C permit shall not be required to file with the board proof of liability insurance, provided that all of the servicing, repairing, adjusting, removing, and installing of LP-gas equipment, appliances, and systems is only being accomplished on their own LP-gas equipment, appliances, and systems.
6. (f) Whenever a Class A, B, or B-1 permit holder’s company name has changed, all vehicles and equipment assigned to the company shall be relettered with the new company name as follows: By the annual renewal of the company permit or within 180 days of the name change, whichever is greater, provided, for good cause shown the board may extend the date by official action. LP-gas delivery cargo vehicles or equipment placed in operation shall be lettered and placarded as required by the applicable section of the Code of Federal Regulations, Title 49. Vehicles and equipment not lettered with the company name within the described period or in accordance with Code of Federal Regulations, Title 49, shall be removed from service until the proper company name is affixed to the vehicle or equipment by the owner.
7. (g) Counties, municipalities, or other local entities are prohibited from requiring any further local testing or other requirements of LP-gas servicemen, certified by the LP-Gas Board, subject to the payment of any applicable local privilege, license, or business fees or charges.

(Acts 1965, No. 220, p. 305, §6; Acts 1979, No. 79-435, p. 690, §1; Acts 1984, No. 84-293, p. 555, §1; Acts 1988, No. 88-142, p. 215, §3; Acts 1989, No. 89-535, p. 1097, §1; Acts 1992, No. 92-123, p. 213, §3; Acts 1994, No. 94-211, p. 283, §2; Acts 1997, No. 97-685, p. 1361, §1; Act 2008-128, p. 174, §3; Act 2014-145, p. 353, §1.)