1. (a) The department adopts by reference the following sections of the 2013 edition of the American Society of Mechanical Engineers' Boiler and Pressure Vessel Code (ASME code) as interpreted as of July 1, 2013:

   1. (1) Section I, Rules for Construction of Power Boilers;
   2. (2) Section II, Materials;
   3. (3) Section IV, Rules for Construction of Heating Boilers;
   4. (4) Section V, Nondestructive Examination;
   5. (5) Section VI, Recommended Rules for Care and Operation of Heating Boilers;
   6. (6) Section VII, Recommended Guidelines for the Care of Power Boilers;
   7. (7) Section VIII, Rules for Construction of Pressure Vessels;
   8. (8) Section IX, Welding, Brazing, and Fusing Qualifications;
   9. (9) Section X, Fiber Reinforced Plastic Pressure Vessels.
2. (b) The department adopts by reference the American Petroleum Institute's Pressure Vessel Inspection Code: In-Service Inspection, Rating, Repair, and Alteration, 10th edition, May 2014, with Addendum 1, May 2017, and Addendum 2, March 2018 (API 510).
3. (c) Canadian registration number (CRN) vessels that are designed and constructed in conformance with the ASME Code, but do not bear the ASME symbol, will be approved for use upon receipt of the manufacturer's data sheet.
4. (d) A boiler or pressure vessel fabricated for installation in this state in accordance with AS 18.60.180 - 18.60.390 must bear a National Board of Boiler and Pressure Vessel Inspectors registration number. Cast iron heating boilers are exempt from the requirements of this subsection.

(In effect before 7/28/59; am 4/22/73, Register 45; am 11/22/75, Register 56; am 6/11/78, Register 66; am 5/12/82, Register 82; am 6/21/84, Register 90; am 10/21/92, Register 124; am 12/17/99, Register 152; am 11/1/2000, Register 156; am 9/25/2002, Register 163; am 6/14/2006, Register 178; am 9/27/2008, Register 187; am 10/16/2012, Register 204; am 10/23/2014, Register 212; am 4/24/2020, Register 234)