1. (a) A licensed pull-tab manufacturer may distribute only those pull-tabs in this state that the manufacturer designed, constructed, assembled, and packaged.

2. (b) A licensed pull-tab manufacturer may not distribute a pull-tab series in this state to a licensed pull-tab distributor unless the manufacturer has

   1. (1) affixed a state identification stamp on the face of the flare card accompanying the series of pull-tabs;
   2. (2) included with the pull-tab series the remaining state identification labels from the set for use by the permittee, distributor, or operator, in accordance with other provisions of this chapter; and
   3. (3) recorded the state identification number as required under this chapter.
3. (c) Repealed 6/22/2008.

4. (d) A licensed pull-tab manufacturer shall affix a packing slip outside of a shipment of pull-tabs to be shipped in this state. The packing slip must contain

   1. (1) the name of the licensed pull-tab manufacturer;
   2. (2) the pull-tab serial number;
   3. (3) the date of packaging of the series;
   4. (4) the name or identification of the person who packaged the shipment; and
   5. (5) the state identification number.

(Eff. 7/30/94, Register 131; am 6/22/2008, Register 186)

Authority: AS 05.15.060, AS 05.15.181, AS 05.15.185