Alaska Admin. Code tit. 12, § 36.063 – Engineering education and work experience requirements

(a) To be eligible for a professional engineering examination other than the structural engineering examination, an applicant must
1. (1) have passed the fundamentals of engineering examination or had these requirements waived under 12 AAC 36.090(a);
2. (2) apply for examination in a branch of engineering recognized by 12 AAC 36.990(17); and
3. (3) submit to the board satisfactory evidence that the applicant's education, work experience, or both are equivalent to the requirements set out in the following table of education and work experience requirements for a professional engineering examination:
TABLE OF EDUCATION AND WORK EXPERIENCE
REQUIREMENTS FOR PROFESSIONAL ENGINEERING
EXAMINATION
Description of
Training Equivalent
Education
in Years Minimum
Work
Experience
in Years Total
Years of
Education
and Work
Experience ABET accredited B.S. degree
in engineering in the branch
of engineering applied for
listed in 12 AAC 36.990(a),
and a master's or doctorate in
engineering acceptable to the
board
538ABET accredited B.S. degree
in engineering that is not in
the branch of engineering
applied for listed in 12 AAC 36.990(a), and a master's or
doctorate in the branch of
engineering applied for listed
in 12 AAC 36.990(a) that is
acceptable to the board
448ABET accredited B.S. degree
in engineering in the branch
of engineering applied for
listed in 12 AAC 36.990(a)
448ABET accredited B.S. degree
in engineering technology
in the branch of engineering applied for listed in 12 AAC 36.990(a)358ABET accredited B.S. degree
in a branch of engineering
that is not the branch for
which the applicant has
applied
358Master's degree in
engineering acceptable to the
board in the branch listed in
12 AAC 36.990(a) for which
the applicant has applied or
in a discipline substantially
similar to the branch for
which the applicant has
applied
268Doctorate degree in
engineering acceptable to the
board in the branch listed in
12 AAC 36.990(a) for which
the applicant has applied or
in a discipline substantially
similar to the branch for
which the applicant has
applied
358Master's or doctorate degree
in engineering acceptable to
the board from a school which
has an ABET accredited
undergraduate engineering
program in the branch for
which the applicant has
applied
358Non-ABET accredited B.S.
degree in engineering in the
branch applied for
369
(b) Education for initial registration must be in the branch of engineering in which the applicant seeks registration for full credit to be given. If the education is not in the branch of engineering in which the applicant seeks registration, the board will determine the amount of credit to be given based on comparability with the branch of engineering for which the applicant has applied for registration. An applicant with a degree obtained outside of the United States shall submit
1. (1) a transcript of the applicant's education and if the transcript is not in English, submit a translation into English and a signed and notarized affidavit by the translator of the accuracy of the translation; and
2. (2) an evaluation of the applicant's education from an agency approved by the board unless the applicant's education has been earned at a school accredited by an accreditation agency recognized by the board.
(c) The minimum work experience required for registration must include
1. (1) two years of responsible charge experience or the equivalent experience gained through a mentoring program, within the meaning given in 12 AAC 36.990(a) and this section; to receive full credit for responsible charge experience, an applicant must gain responsible charge experience while under the responsible control of a professional engineer registered in the United States in the branch of engineering for which the applicant has applied; the board will determine the amount of credit given for responsible charge experience gained under the responsible control of a professional engineer registered in the United States in another branch of engineering based on the comparability with the branch of engineering to which the applicant has applied;
2. (2) experience gained under (j) of this section will be considered for credit only if it is gained after the applicant has completed education or work experience or both that are equivalent to the requirements to be eligible for the fundamentals of engineering examination.
(d) For registration in more than one branch of professional engineering listed in 12 AAC 36.990, professional work experience used to qualify for registration in one branch of engineering will be evaluated by the board in considering an application for registration in another branch of engineering. Except as provided in (c) of this section, responsible charge or mentored experience must be entirely in the branch of engineering applied for and may not be counted as responsible charge experience in another branch of engineering or in land surveying.
(e) Education and work experience may not be accumulated concurrently. A maximum of 12 months' credit may be claimed for a calendar year.
(f) The board will accept a maximum of two years of credit for professional work experience used in securing registration in land surveying as experience in securing registration in civil or mining engineering.
(g) Work experience for initial registration must be in the branch of engineering in which the applicant seeks registration for full credit to be given. If the work experience is not in the branch of engineering in which the applicant seeks registration, the board will determine the amount of credit to be given based on comparability with the branch of engineering for which the applicant has applied for registration.
(h) The board will accept up to a maximum of two years of subprofessional work experience for up to one half of the work experience required for registration based on its meeting the definition of "subprofessional work" in 12 AAC 36.990.
(i) Repealed 5/5/2023.
(j) To meet the mentoring requirements of this section, an applicant must complete quarterly face-to-face meetings with a professional engineer who is registered in the United States and registered in the same discipline that the applicant is applying for. One quarter of responsible charge experience will be credited for every two quarters of a documented mentoring program. An applicant shall
1. (1) prepare a report for each meeting on a form provided by the department, which includes
  1. (A) a description of what topics were covered during the meeting;
  2. (B) a statement indicating whether or not it was responsible charge work and if the work was performed according to industry standards;
  3. (C) the professional engineer's seal and signature; and
2. (2) submit as a part of the final report a statement from the professional engineer, who served as the mentor, recommending the applicant for registration.
(k) Repealed 10/22/2023.

(Eff. 9/30/78, Register 67; am 6/29/84, Register 90; am 8/13/87, Register 103; am 6/3/89, Register 110; am 3/16/96, Register 137; am 7/26/97, Register 143; am 8/26/98, Register 147; am 11/20/99, Register 152; am 3/8/2001, Register 157; am 6/13/2003, Register 166; am 7/22/2004, Register 171; am 9/11/2004, Register 171; am 10/29/2009, Register 192; am 9/9/2016, Register 219; am 5/25/2017, Register 222; am 5/5/2023, Register 246; am 10/22/2023, Register 248; am 4/18/2024, Register 250)