77 F. 630 | 6th Cir. | 1896
Having made the foregoing statement of facts, the opinion of the court was delivered by
Though the issue is one of priority of invention between Charles S. Hisey and George Ligowsky, its solution under this proceeding does not depend upon the mere preponderance of evidence. That department of government charged with the duty of originally hearing and determining questions of priority arising under conflicting applications of inventors has, upon evidence and full consideration, determined the controversy between those parties against the contention of the present complainants, and awarded a patent to the assignee of George Ligowsky. But for the provision made by congress, and found in section 4915 of the Revised Statutes, the conclusion of the executive department of government, that Hisey was not entitled to a patent upon improvements which he claims to have invented in cartridge loading machines, would be fatal to his claim. The statute referred to is the sole foundation for the jurisdiction now invoked. In considering the weight to be attached to the action of the patent office in a like case, where there had been an interference issue between rival claimants of the same invention, the supreme court said:
“It is an application to the court to set aside the action of one of the executive departments of the government. The one charged with the administration of the patent system had finished its investigations, and made its determination, with respect to the question of priority of invention. That determination gave to the defendant the exclusive rights of a patentee. A new proceeding is instituted in the courts, — a proceeding to set aside the conclusions reached by the administrative department, and to give to the plaintiff the rights there awarded-*633 to the defendant. It is something' in the nature of a suit to set aside a Judgment, and, as such, is not to be sustained hy a mere preponderance of evidence. * * * Upon principle and authority, therefore, it must he laid down as a rule that, where the question decided in the patent office is one between contesting parties as to priority of invention, the decision there made must be accepted as controlling upon that question of fact in any subsequent suit between the same parties, unless the contrary is established by testimony which in character and amount carries thorough conviction.” Morgan v. Daniels, 153 U. S. 124, 125, 14 Sup. Ct. 773.
Tested by this rule, have the complainants made such a case as to justify ibis court in canceling the patent issued to Ligowski’s assignee, and requiring one to be issued to Hisey instead?
Machines for automatically loading cartridge shells with powder, wads, and shot had been long known in the art before either Hisey or Ligowsky claim to have made the improvements now in controversy. Many patents for such cartridge loading machines have been'filed in this record, to illustrate the history of the art before the attention of either was attracted to such machines. In most of these patents, cartridge shells were loaded with powder, shot, and wads automatically, and then ejected from the machine. In most, if not all, of them, to which attention has been particularly called, the carrier conveying the empty shell to the different loading tools traversed a circular path. The location of the loading tools necessarily conformed to the structure of the shell carrier, and were therefore arranged in a cluster. The circular arrangement of the loading tools, and the circular character of the table or disk carrying the empty shells to the loading tools in proper succession, characterized all of the machines of the old art, and are therefore known as “round table machines.” The radical point of departure from this old round table type of machine, covered by the conflicting claims put in issue hy the interference proceeding, lies in the substitution of an endless belt, band, or carrier, suitably actuated, and provided with shell cases secured thereto, and projecting therefrom, for the old round table disk carrier of the old type of machine. The change from a rigid disk carrier, traversing a circular path, to an endless belt carrier, moving in a straight line, made necessary a readjustment of the location of the loading tools, and their arrangement in a straight line above the belt shell carrier, as well as the adaptation of a device for delivering the shells properly located in the path of the carrier. This substitution of an endless belt shell carrier, properly actuated, for the old round table carrier, and the necessary relocation and proper adaptation of the loading tools and other devices already known to the art to the new form of carrier, constituted the real substance of the improvements on the old machines described in the interference issues.
The case for Hisey, as the first and sole inventor of these improvements on the old type of machine, is substantially this:
First. That, during the summer and fall of 1887, he had been engaged in overhauling and truing up two round table machines for the Peters Cartridge' Company,, and in constructing two other
'Second. The drawing mentioned is produced and filed, and bears date May 10, 1888. It is signed by Hisey, as inventor, and by George Ligowsky and Martha Ligowsky, as witnesses. The word “Inventor,” above the signature of Hisey, was written by George Ligowsky, and the word “Witness,” above the signatures of George
Third. That in August, 1889, complete detailed working drawings were made, and an organized machine shortly thereafter constructed.
Fourth. That September 8, 1889, an application was filed in the patent office for a patent upon these improvements, applied to a cartridge loading machine for loading bullet cartridges; - and on June ¿1, 1889, he filed a second application for the same novel features applied to a machine for loading cartridges with shot.
Fifth. That photographs of the organized machine constructed in the summer and fall of 1888, at Berlin, Germany, by Hisey, or under his plans and direction, were sent from Berlin, in January, 1889, by one Armin Tenner, for whom the machine was built, to George Ligowsky, at Cincinnati.
Sixth. Between the date of Hisey’s original drawing, May 10, 1888, and his arrival in Berlin, in June, 1888, where he went to construct certain cartridge loading machines for Arinin Tenner, it is shown that he exhibited a section of endless chain and his original drawing to several persons, and claimed the machine shown in the drawing as his invention.
This summary of the evidence favorable to Hisey’s claim is met upon the other side as follows:
First. By the testimony of George Ligowsky that while Hisey was working on the Peters Cartridge Company’s round table machines, in the shops of the Cincinnati Screw & Tap Company, he (Ligowsky) was having built by the same company a certain automatic irrigating machine, of his own invention, and upon which he subsequently took out a patent; that, this work took him frequently to the shops, and there his attention was attracted to the cartridge loading machines upon which Hisey was working; that in that way he and Hisey first met each other, and soon became intimate; that being a machinist, and of an inventive turn of mind, and the inventor of a number of mechanical devices, he became interested in the mechanism of these machines; this was during the summer and early fall of 1887; that his study of these round table machines led him to the conception of the novel features of the improvements forming the subject-matter of controversy between himself and Hisey; that during August and September, 1887, he produced seven sketches showing the endless belt carrier, and a mode of adaptation to the old loading tools and other devices; and that during the year 1887 he disclosed these novel improvements to others, and exhibited to them some or all of his said seven sketches, and explained his ideas. These seven sketches are produced and filed. Most of them bear date in August or September, 1887, in the handwriting of Ligowsky. Among those persons to whom he disclosed his invention and exhibited Ms sketches, he includes the complainant Hisey. He says he fully explained his conception to Hisey by aid of his sketches, and by chalk drawings made in the shop with the old Peters ma
“If there be in the case a material allegation of fact resting upon oral evidence, which is better supported by proof than any other, it is that, during the year 1887, Ligowsky produced seven sketches, showing the novel parts of the improvements in controversy, and during that year made disclosures of those novel features to others. As to whether Ligowsky during that year disclosed his conception to Iiisey, he said, in view of the admitted intimacy of these men and their association at the shops where these Peters machines were being constructed, that ‘the strong natural probabilities in the case, taken with the amount of positive testimony on the point, conrpel it to be found as matter of fact that prior to April, 1888, Ligowsky disclosed the invention to Hisey.’ ”
Some additional evidence bearing upon this issue of fact has been added to the evidence since the patent office decision. This new evidence is merely cumulative, though the new proof on the whole tends to add somewhat to the case for Ligowsky. That Ligowsky did, during the year 1887, disclose his invention to others, and did exhibit to others some or all of the sketches now filed, is testified to by no less than 11 witnesses, who have in no way been effectively impeached. That Hisey was one of the persons to whom such disclosures were made, or was present when they were made to others, is likewise testified to by substantially the same witnesses. Whatever criticism may be made as to unreliability of the memory of some of these witnesses as to dates of such disclosures, or as to the identity of the sketches they saw during 1887 with those now exhibited by Ligowsky, or as to their bias from relationship or interest, does not apply to certain disinterested mechanics, associated with Hisey in the shops of the Cincinnati Screw & Tap Company, and familiar before such disclosure with the construction of the old Peters machines. Several such witnesses fix the time when Ligowsky explained his ideas and exhibited his sketches as during the time that the Peters machines were being worked upon in the shop where both they and Hiseywere employed. These witnesses, Frederick Holz, Oscar W. Muellar, George Englehéardt, W. P. Hummell, and George A.
Complainants insist that this evidence of Ligowsky, supported as it is by so many witnesses corroborating him in its essential parts, is overthrown by certain evidence claimed to be in the nature of admissions by Ligowsky, inconsistent with his present position. These matters relied on as admissions of Hisey’s claim to priority may be summarized as follows:
First. Alleged declarations of Ligowsky during 188S, touching Hisey’s inventions and improvements in cartridge loading machines, and the fame and fortune which were sure to come to him from his inventions in that line. Concerning this line of evidence it may fairly be said that its evidential weight is much impaired from the fact that, though accessible, it was not introduced during the interference proceedings. Before a final decision had been reached in the patent office, Ligowsky died, and thus the defendant has lost all opportunity of getting Ligowsky’s explanations or denial. None of the witnesses making this evidence, except certain close relations of Hisey, make Ligowsky speak specifically of the endless belt carrier as any part of Hisey’s improvements. The significance of this will appear later.
Second. They rely upon certain references in a correspondence' between Ligowsky and Tenner to Hisey’s inventions in cartridge loading machines, and to the absence of any reference in the same correspondence to his own invention, until after he had received from Tenner photographs of an endless belt machine built at Berlin, by Hisey, for Tenner. This correspondence began early in 1888, after Tenner’s return to Berlin, and continued through 1888, while Hisey was- in Europe.
Third. They rely, upon Ligowsky’s conduct in laying aside his sketches after he says he made them in August and September, 1887, and taking no steps to perfect his invention, or protect it by patent, until after Hisey had perfected an organized and operative endless belt carrier machine, and applied for letters patent covering these very improv'ements. This conduct they compare with Hisey’s activity in pushing his conception, constructing an organized machine, and applying for a patent as early as September, 1888.
Fourth. They rely upon two contracts made June 4, 1888, between Ligowsky and Hisey, and insist that Hisey, by these contracts, is recognized by Ligowsky as the inventor of the improvements now in dispute. These agreements are claimed to be dependent one on the other, and that the consideration for the one is the other. These contracts are as follows:
“To all whom it may concern: Witnesseth that I, Charles Hisey, of Cincinnati, county of Hamilton, state of Ohio, United States of America, do hereby agree, in consideration of services rendered, to pay or otherwise secure or place*639 to the credit of George Ligmvsky, of the same place;, ten per cent, of my shares of all value's that have aecruoel or shall accrue; from all manufactories or com-moi-cial enterprises that have realize*!, or shall realize values on a cartridge loading machine, which is my invention. This contract, to relate only to European countries. In witness whereof, I have .set hereunto my hand and sc'al, this fourth day of June, 1888. O. S. Ilisey.”
“To all whom It may concern: Witnesseth that I, George ligowsky, of Cincinnati, county of Hamilton, state of Ohio, Unite*! Stales of America, do hereby agree, in consideration of services rendered, to pay or otherwise secure or place to the credit of Charles Ilisey, of the same place, ten per cent, of my shares of all values that have accrued or shall accrue from all manufactories or commercial enterprises that have realized or shall realize values on an irrigating machine, which is my invention. This contract to relate only to European countries. In witness whereof, I have sei hereunto my hand and seal, this fourth day of June, 1888. George Ligowsky.”
Fifth. They rely upon Ligowsky’s attestation of Hisey’s original drawing of May 10, 1888, as an admission that the latter was Hie original and sole inventor of the endless chain carrier idea shown therein.
The matters thus relied upon as admissions tending to establish Elisey’s claim to be the first and sole inventor of the improvements in cartridge loading machinery here involved must be judged in the light of the fact that, at the time, Hisey was claiming certain other improvements in automatic cartridge loading machines, in no way involving the endless carrier idea.
In 1887, and prior to that time, GL M. Peters, of the Peters Oar-fridge Company, liad been engaged in the perfecting of certain improvements upon the old round table type of machine, for which he obtained a patent March 29, 1887, upon an application filed March 26, 1886. That patent is numbered 860,018. The device thus patented related to improvements in machines for loading-cartridge shells, and was described as consisting, “primarily, of a circular table, peculiarly actuated, and revolving within a stationary table, the' revolving table being provided with the shell holding cases, the filling devices being supported by the stationary table.” Two machines built under the claims of this patent were in use in the summer of 1887, at the mills of the Peters Cartridge Company. These machines did not work satisfactorily. To remedy tlieir defects, and improve their mechanism, they were sent to the shops of the Cincinnati Screw & Tap Company, in the summer of 1887. Hisey was a mechanic employed by that company to overhaul them, and make them operative. That job gave Ilisey his first acquaintance with such machines, and was also the occasion for Ligowsky’s becoming interested in that line of invention. After the overhauling of the two old machines, the same company was employed to build two new Peters machines, and Hisey was again selected for this work. Certain -improvements were made in the mechanism of these machines, which Hisey subsequently claimed credit for as an inventor. These improvements in no wise involved a change in the type, for the new machines constructed for the Peters Company were round table machines, constructed under the GL M. Peters patent, with certain improvements not involving the endless belt carrier idea in the remotest
We have before mentioned that the oral declarations of Ligowsky, supposed to be inconsistent with his claim to have himself invented the endless chain carrier idea, were not introduced on the interference proceedings, nor until after Ligowsky’s death. But in respect of the other matters, in the nature of admissions, we are not left to conjecture as to his explanation. The contracts
“The contract with Mr. Hisey relating to cartridge loading machinery was due 1o a desire on Mr. Hisey’s part to strengthen his European patent, and lie thought, and I was of the same opinion, it was advisable to cover the principle of an endless chain cartridge loading machine in Europe, so as to strengthen the other patents which he intended to secure. Mr. Hisey expressed himself as desirous of patenting the endless chain machine abroad, and we settled on ten per cent, of his entire profits on cartridge loading machinery as a compensation for utilizing my idea abroad.”
He adds, touching the claim that the one contract was the consideration for the other:
“That the contract about the irrigating machine was to compensate Mr. Hisey for any efforts, in my behalf, in the way of assistance to be rendered when this machine should be introduced over there in case 1 was absent.”
The drawing bears date May 10,1888, and the contract he refers to is dated June 4, 1888; but that they both had their origin in a purpose to conjoin their improvements for European purposes is a most probable solution of Ligowsky’s signature to Hisey’s drawing. Indeed, Ligowsky said, in the same evidence, that the contract between himself and Hisey appertaining to the profits anticipated from European patents upon their conjoined inventions was verbally agreed upon “long. before Hisey went to Europe,” which was not later than June 11, 1888. Touching his signature to that drawing, he said:
“ITisey showed me a drawing, not of his endless belt chain cartridge loading machine, but of my machine. He told me that he had invented an improvement on my construction, consisting, as he claims, of a driving mechanism, which was to impart motion to ihe machine from beneath. He explained to me at my house, and in the presence of several witnesses, the advantages that would arise from driving this machine from below, instead of from the top, as I had proposed. His method of doing this, I remember, was not definitely drawn, and he intended, as he said, to work it out more in detail. He wanted me to witness this as his improvement, and put my signature on it, and also requested my sister, who was present, to put her name to it.”
“We witnessed the drawing as an improvement, so claimed, on the construction of the machine that Hisey and myself had agreed to patent in Europe.”
That it was a dangerous step to witness such a drawing without explaining how far it was intended to illustrate Hisey’s independent invention in a way to leave nothing open to future fraud or mistake is very evident. The mistake in this particular then made by Ligowsky is most probably the potent cause of this expensive and protracted litigation. It is to be remembered, however, that at that time these two men were very intimate, and reposed in each other great confidence. That Hisey should carry to Europe with Mm some evidence that would entitle him to European patents was reasonable. That Ligowsky was not entirely frank about how he came to sign this drawing must be admitted. That he signed it only to show Hisey’s improvement in the location of the driving machinery is not altogether credible. A close comparison of Ligowsky’s sketches made in 1887 with this Hisey drawing, leaves room for doubt as to whether such a change or improvement is indicated by the drawing. It is a matter, however, about which skilled experts, examined in this case, have differed in opinion. It is to be noticed, moreover, that this Hisey drawing was not then present, and had not been seen by LigoAvsky for several years. That something was said about a change in the location of the driving mechanism is likely. Several witnesses, all closely related to Ligowsky, however, do, in substance, state this. It is not an improbable conclusion that tMs sketch was witnessed as a drawing of an endless chain machine which Hisey and Ligowsky had agreed to patent in Europe in Hisey’s name.
It must be conceded that the combined effect of the evidence we have been considering, oral and documentary, would greatly discredit Ligowsky’s testimony that he made this invention in 1887. The explanations, made by him of how he came to sign the Hisey drawing, and enter into the agreement of June 4, 1888, though plausible and probable in the light of the other inventions which Hisey claimed, would, in connection with his long delay in perfecting his invention or applying for a patent, in contrast with Hisey’s steady persistence in pushing his claim and earlier application, incline one strongly to the opinion that Ligowsky’s claim to priority of conception was not supported. But the case does not stand that way. If we set aside Ligowsky’s evidence entirely, there is left in the case a mass of independent evidence tending to establish that, in 1887, Ligowsky made claim to the invention in controversy, and that during that year he exhibited the sketches he now files, as embodying a novel invention, which he disclosed and explained to others, including Hisey. A suggestion that these Avitnesses are corrupt is not to be tolerated. That they may be mistaken as to when these disclosures were made, or as to the identity of the sketches they saw, and as to what they heard Hisey say during that year about LigoAvsky’s endless belt carrier idea, is, of course, possible. But which is more probably true? The story that Ligowsky tells, as to how he came to
The evidence does not produce that clear conviction which would justify a court in saying that the patent office was in error in its decision of this question of priority. It is not enough that the declarations of Ligowsky, arid his admissions, either oral or documentary, cast discredit upon him as a witness for himself. This evidence, in ike nature of admissions, must be sufficiently cogent to make it clear that the independent evidence suppoi'1 ing the action of the patent office cannot be true. This is not the state of mind reached by us upon the questions we have been considering, and we must hold, as did the patent office and the court below, that, during 1887, Ligowsky did produce the seven sketches found in this record, and did claim the invention here involved, and did disclose to others, including the complainant Hisey, the novel features of the improvements now claimed by the latter.
Finally, if lias been zealously urged that if it be admitted that' Ligowsky did and said all that witnesses ascribe to him, and at the time they say they heard such disclosures, or saw his sketch drawings, the evidence of such witnesses, and the disclosure made by Ligowsky’s drawings of 1887, do not establish that Ligowsky had so far developed or perfected the idea of an endless chain carrier as an element in an automatic cartridge loading machine as to entitle Mm to the attitude and right of the first and sole inventor of the improvements here involved.
It is said that the question here to be determined is not who -first conceived the idea of an endless chain shell carrier, nor who first talked about inventing a cartridge loading machine which should utilize an endless chain as one of its constituents, or who first made ineffectual efforts to show how such a chain might become an element in an operative machine, but, rather, who first embodied in practical form the operative combination of which such an endless belt carrier was an element. This argument has been rested upon a technical criticism by experts of the Ligowsky sketches made in 1887, and a like criticism of the testimony of witnesses as to the disclosures made to them and others during that year. But if it be once assumed that Ligowsky made the
The case is not one of two independent, but identical, inventions. If Ligowsky is able to show that in 1887 he conceived the improvements here in controversy, and actually gave such substantial expression to the invention as that, without the further exercise of -the inventive faculty, one familiar with the construction and operation of the old type of machine could construct a new machine embodying the novel features, it must follow, if the case be determined upon the assumption of the truth of Ligowsky’s account of the matter, that he made a full disclosure of his invention to Hisey, and that the latter is not entitled to the attitude of one whose conception is later, but who first constructed -an organized machine, and first applied for a patent. In other words, if Ligowsky ever invented the improvements involved, he did so in 1887, and disclosed his conception the same year to Hisey. If, in fact, Ligowsky had in 1887 such a full and adequate conception of this invention, and disclosed it to Hisey, the question as to whether he used reasonable diligence in perfecting his drawings or building a machine or applying for a patent, is a matter of no importance as the matter now stands on this bill. Hisey’s case must stand or fall upon the question as to whether he is the sole and first inventor. If, in fact, he has only appro
Upon the proceedings in the patent office, priority of application operated most favorably for Hisey. The burden was thereby thrown upon Ligowsky to show one of two things, — either that Hisey had never at any time made the invention he claimed, or that his own conception antedated that of Hisey, and thus entitled him to carry back the question of priority to the date of first conception. That burden is now, by reason of the action of the patent office, shifted; and it now devolves upon the assignee of Hisey to show that, in point of fact, Hisey’s concexition antedated that of Ligowsky, or that the latter never at any time made the discovery in controversy. For the purpose of this branch of the case, we shall assume that Ligowsky disclosed to Hisey, during 1887, all that he had done or conceived about the construction of a, cartridge loading machine embodying an (aidless belt carrier. If Ligowsky’s concexition was -at that time sufficiently develo]ied and perfected to enable one familiar with the construction and operation of the old type of machine to construct a cartridge loading machine embodying the novel features described in the interference issue by the exercise of mechanical skill, and without further invention, he, and he alone, is the first inventor, and Hisey is merely attempting to appropriate the conception of Ligowsky. On the other hand, if Ligowsky had only an inchoate idea that in some way an endless belt carrier, suitably actuated, might be devised, which could be substituted for the old rigid circular carrier, but did nothing towards developing and demonstrating the utility of his conception, lie would not be an inventor at all. The mere existence of an intellectual notion that a certain thing could be done, and, if done, might be of practical utility, does not furnish a. basis for a patent, or estop others from developing practically the same idea. Agawam Co. v. Jordan, 7 Wall. 583-602; Christie v. Seybold, 6 U. S. App. 544, 5 C. C. A. 33. and 55 Fed. 69. SSo, if ineffectual efforts were made to give the idea form, through drawing^, models, or machines, but were abandoned before reach mg such a stage of completion as to require only ordinary mechanical skill to carry the concexition to success, the claim of priority of invention could not be sustained against a later independent concexition, carried into practical form at an earlier date. Reed v. Cutter, Fed. Cas. No. 11,645.
The solution of the contention of complainants’ counsel now under consideration must depend upon the answer to the question we now reach, which is this: Did Ligowsky, in 1887, have such a complete and adequate conception of this invention as to enable a. skilled mechanic, familiar with the construction and operation of the old type machine, to construct a machine embodying the
It was said by this court -in Christie v. Seybold, heretofore cited:
“That the man who first reduces an invention to practice is prima facie the first and true inventor, but that the man who first conceives, and, in a mental sense, first invents, a machine, art, or composition of matter, may date his patentable invention back to the time of its conception, if he connects the conception with its reduction to practice by reasonable diligence on his part, so that they are substantially'one continuous act. The burden is on the second reducer to practice to show the prior conception, and to establish the connection between that conception and his reduction to practice by proof of due diligence.”
That burden may be met by the' exhibition of drawings, and by oral explanations of his conception antedating the first reduction to practice by another. Railroad Co. v. Stimpson, 14 Pet. 448; Reed v. Cutter, cited above; McCormick Harvesting Mach. Co. v. Minneapolis Harvester Works, 42 Fed. 152.
That Ligowsky did not construct a machine during 1887, or at any other time, is not vital to this question. It was said in Loom Co. v. Higgins, 105 U. S. 594, by Justice Bradley, that: '
“An invention relating to machinery may be exhibited either in a drawing or in a model, so as to lay the foundation of a claim of priority, if it be sufficiently plain to enable those skilled in the art to understand it.”
In McCormick Harvesting Mach. Co. v. Minneapolis Harvester Works, 42 Fed. 152, a question of priority of invention ivas settled upon proof of oral explanations of certain improvements touching harvesting machines made by the inventor in the presence of an old machine; the inventor orally explaining the scope of his proposed improvement, and how he proposed to apply it, in terms sufficiently clear to enable a good mechanic, familiar with such machines, to construct the device from the description given.
That Ligowsky had such an adequate conception of his invention in 1887, and made such full disclosure through his drawings and by oral explanations, sometimes by aid of his sketches, and sometimes in the very presence of the old Peters machines, as to enable persons skilled in such machines to have constructed and applied his improvements without further exercise of the inventive faculty, was one of the facts found in favor of Ligowsky in the interference proceedings by the examiner of interferences. Upon appeal, the board of examiners in chief were of a contrary opinion; but, on final appeal to the commissioner in person, the decision of the examiner of interferences was affirmed, the commissioner distinctly deciding that “Ligowsky’s sketches show the endless band mechanism for giving it intermittent motion and a-
These differing conclusions of the several boards of the patent office who heard the evidence submitted upon this vital question of the adequacy of Ligowsky’s conception of this invention'in 1887 clearly indicate that the question was one not free from doubt; although the final conclusion was favorable to Ligowsky. Home evidence has been submitted upon this question which was not before the commissioner. It consists principally in expert opinion and criticism of Ligowsky’s sketch drawings, and of the drawings' and specifications attached to Ligowsky’s application for a pal ent. These seven original sketches are undoubtedly rude and imperfect, and do not show, or attempt to show, an organized working machine. But we do not regard this as a vital defect. The claims put in interference do not involve anything more than certain improvements upon machines well known in the art, and contemplate a combination of certain novel features with the loading tools and other devices of the old Peters machine. The question as to whether these sketches so clearly show the novel features as that one familiar with the construction and operation of the Peters machine could from these construct a machine embodying the endless belt feature is one addressed to persons, poSr sessing a mass of information about: the old art. If such persons, from these sketches, could construct a machine containing the improvements conceived by Ligowsky, without the further exercise of the inventive faculty, ’then it is very clear that Ligowsky must be held to have had a sufficient conception in 1887 to entitle him, on a question of priority, to carry the date of his invention back to the date of these drawings. That they are incomprehensible to one unacquainted with such machinery, or to a mechanic unaware of what they purported to be, is no answer. That they do not in all respects show the relation of the novel features to the old loading tools, nor describe precisely the mode of attachment, nor, with scientific exactness, show other details of the combination, is no! fatal, if the absent features are such as would be readily supplied by a mechanic familiar with the subject, and without requiring further invention. The well-known statement of the doctrine touching the sufficiency of description in the specifications and, drawings of an application for a patentable novelty by Justice Bradley, in Loom Co. v. Higgins, 105 U. S. 586, applies with even greater force to the adequacy of such sketch drawings, when the question is one of carrying back the date of an invention to the time of first conception. In the case referred to, Justice Bradley, for the court, said:
“If a mechanical engineer invents an improvement on any of the appendages of a steam engine, such as the valve gear, the condenser, the steam chest, the walking beam, the parallel motion, or wliat not, he is not obliged, in order to malte himself understood, to describe the engine, nor the particular appendage*648 to which the improvement refers, nor its mode of connection with the principal machine. These are already familiar to others shilled in that hind of machinery. He may begin at the point where his invention begins, and describe what he has made that is new, and what it replaces of the old. That which is common and well hnown is as if it were written out in the patent, and delineated in the drawings.”
The seven drawings made by Ligowsky are not a connected series. Neither do they, or any one of them, delineate a fully organized machine. Some of them represent one feature, and some another, and all show that they were experimental in character, and indicate but roughly the progress of the idea in the inventor’s mind. We here set them out, prefacing that the one appearing to be No. 6 is the first made in order of time.
The explanations and. notes found on them were generally contemporaneous. with the sketch, and are to be taken as constituting evidence as to the state of the conception in the inventor’s mind at the time. The explanation made by Ligowsky of these drawings on the interference proceeding was as follows:
“Q. 25. Please look at sketch No'. 1, and state what it is intended to represent. A. Sketch No. 1 shows a double endless leather belt, with a centrally inserted thin metal steel band, riveted together with copper rivets. Upon the outer face of this belt are mounted metallic shell cases of carriers, whose bore coincidí» with a hole cut in said endless belt, so as to allow the empty shells to be inserted. On said drawing 1 observe notes written in my handwriting-, explaining the details and manner of making such a belt. The first note reads: ‘Shell ease to be turned thin at base, and crimped under into the belt, and which will cause same*651 to conform -with face of pulleys.’ Second quotation: ‘landless double belt with metallic strip center.’ bast note reads: ‘Make base wider for holding rivet.' This referred to a method of stiffening the shell case on the belt. Q. 20. State when these notes quoted in your last answer were put on the drawing. A. My recollection Is that these notes were added to the drawing a day or two after it was made. There was some difficulty in securing this case firmly on the leather, and various ideas occurred to me; hut the crimping under of the thin end of (lie case prevailed with me, and, in order not to have it slip my memory, I made a note of same upon the drawing. Q. 27. Please look at sketch No. 2, and describe what: it is intended to represent. A. Sketch No. 2 shows a pulley for driving an endless belt in combination with an actuating device. This actuating device consists of a can-nosed link and hook, which was to be driven from above by an eccentric or cam wheel, which would impart a reciproca ling motion to the same to the link. The operation of this link, which was pendent, from a knee joint, shown just below the word ‘top,’ and above the red line of the sketch, is as follows: The link, in its downward stroke, comes In contact with a. pin and roller mounted, in the spokes of the pulley, engaging itself with Hie pin and roller by sliding along on same until the portion of the link representing the barb or hook of the link is reached, whereupon, being pendent, it drops into engagement by its own weight. There is a noie on here, which 1 will read: ‘Pulley with lifting device for an endless belt.’ The note is on the right hand of the drawing, at the bottom, just below my signature and the dato. Q. 28. In whose handwriting is the note, and when was the same put on the drawing? A. The handwriting is my own, and it was executed together with the dale, on September 3, 1887. Q. 29. Please look at sketch No. 3, and describe the construction and Intended operation of the machine there illustrated. A. Sketch No. 3 represents a sketch made by me of a shell loading device, consisting of two polygonal wheels or pulleys carrying an endless chain, with shell cases or carriers on the individual links, and said chain mounted in position on a frame». The combination of the frame and reciprocating tool carrier is shown, and the method of attaching the actuating link to the driving polygonal pulley. The tool carrier is shown in position in a guiding frame, and in connection with an eccentric disk by means of a short pitman, in rear of this eccentric disk is shown a driving pulley and belt. The guide for the tool carrier is under cut, and hangs over the center of the table which holds the chain. To the right, and mark: d by the word ‘feeder,’ is shown (lie feeding tube in position, and mounted on the supporting spider or rest. On the right-hand upper corner is shown a detail view of the actuating- pulley and driving link. Q. 30. Please look at sketch No. 4, and state what it is intended to represent. A. Sketch No. 4 is a. sketch made by me on September 2(5, 1887, which is best explained by an accompanying note written in my handwriting, and which reads as follows: ‘Multiple jointed links of endless chain and shell carrier to take up wear. Shell case and main link cast in one.’ This link was intended to be made with an intermediate short link, and double pinned, so as to reduce Its wear. Q. 31. Please look at sketch No. 5, and state what the same is intended to represent. A. Sketch No. 5, bearing my signature, and dated November 7, 1887, represents a sketch of one end of the driving end of my cartridge loading device, showing an improved method of driving same by means of a combined sprocket and chain, and pawl and ratchet movement. Said pawl and ratchet movement being driven from the tool carrier by the means of a slide link and roller, the pawl being inserted at one end of the link, near the axis of the sprocket wheel, and engaging into the teeth of the ratchet wheel, which is set before the sprocket wheel. This engagement is accomplished either by a light inward pressure, produced by a. spring, or by a gravity pawl. Q. 32. Please look at sketch No. 0, and state what it represents. A. Sketch No. 6 represents a cartridge loading device, bearing my name and note written in my handwriting. The note roads: ‘Rotating shell carrying belt, with fixed tool holder.’ I believe this sketch to be my first idea of an endless belt cartridge loading device; said sketch bearing evidence of having been executed at the Screw & Tap Co.’s shop, being drawn on the heavy peculiar draw-» tag- paper used at this place. Tn this sketch the tool carrier is stationary, and the loading tools are intended to he driven through a fixed rest, by cam or crank motion, from a shaft running parallel with the tool carrier. The shell feeding tube or device, marked with the word ‘feeder,’ is shown in its proper position*652 on this sketch. Also, the powder magazine, shot magazine, wad-cutting device, and the ejector, shown in their relative positions. Q. 33. Please look at sketch No. 7, and state what it represents. A. Sketch No. 7 represents a scrap which I recently found in the drawer of my drafting table. Evidently, by accident, a portion of this sketch was torn off. Whether this sketch originally had any date or signature, I cannot positively state;' but it was made, I am positive, about the same time the other completer sketches were made. The visible portion of this sketch shows the end view of an endless chain cartridge loading device, with a differently arranged tool rest guide. This guide is in the form of an arch, with a port or aperture underneath, through which the chain would run. Underneath is shown an end view of the polygonal driving wheel carrier lying around it. To the left of the polygonal wheel driving shaft is shown the sprocket wheel, driving the polygonal wheel and chain. On top of the tool carrier guide is shown the location of the bearings for the crank shaft, for driving the tool carrier. In dotted lines is shown the path of travel of the ends of the tool carrier and of the driving pulley.”
To show the wide difference of opinion as to what is shown by these drawings, we set out the view Hisey took of them upon the same trial:
“A. After examining the sketches Nos. 1 and 7, inclusive, I am unable to see a machine in an organized form. Sketch No. 3, in so far as I can see, shows an endless band, a cross-head and connections to a crank wheel, and a bracket or housing over and above the main table, and a device for moving said chain, which, from my experience as a mechanic, would not give the band or chain an accurate motion, as there is no device shown to stop the chain or band at its proper place. The momentum which the device, as shown in sketch No. 3, gives the band, would carry it past its proper place; and this sketch showing no device or tool for placing the powder, no wad devices, no shot device, and no wad rammers, but shows some kind of a device near the driving prismatic disk, and on top of the main table, that I do not understand. Sketch No. 6, I am unable to say what it represents. Sketch No. 1 shows in part and in straight line possibly meant for a band, but, as it is shown solid throughout the view, I cannot see how it could be used In an endless band cartridge loading machine. Sketch No. 5 shows a portion of a crank shaft, and a connection to a piece that 1 am unable to say what it represents; this crank shaft or piece having a bracket support and bearing as shown in sketch, and a device with an endiess sprocket chain, but cannot see what it is intended to perform. It also shows a portion of a leg, and a portion of a table, and a portion of a band. Sketch No. 2 shows a wheel or pulley with some kind of a hook device similar to that in sketch No. 3. Sketch No. 4 shows a sprocket wheel and a piece of chain wrapped around it. The rest of the sketches on sketch No. 4, I am unable to make out what they are. And sketch No. 7 shows, I should judge, in part, an end view, in part; but I am unable to make out what it represents.”
Two technical experts, Mr. Melville E. Dayton and Mr. James W. See, were examined for the complainants. Their testimony was of great length, and their cross-examination equally as elaborate. It must be said as to both of these witnesses that, while they show great critical capacity, neither has any practical experience in the construction or operation of cartridge loading machines. Their evidence is, in ■ substance, an elaborate argument for the purpose of showing that the sketches of Ligowsky left unsolved many mechanical questions, which were of such dignity, in their opinion, as to require invention to carry into practical effect the endless belt idea indicated by these drawings. Upon the other hand, the soundness of the judgment of the patent office as to the adequacy of these sketches has been supported 'bv the opinion of certain other mechanical experts, who have the clear
“They show, further than this, a rough view or sketch, which is a very proper term for the papers, of the ideas of an inventor, as plainly shown, and in many instances written in words that show, in addition to the idea given by their form, what parts of the machine are represented; and that, taken together,_ we have the essential features of a complete machine, showing powder magazine, rammer, powder feeder, wad strip, ejector, shell feeder, cones, and cranks, but not duplicating rammers or wad feeders, such duplication not being necessary in an inventor’s sketch.”
Comparing the claims made by Tenner in his application for British patent No. 12,140, on substantially the same claims now in issue, this witness was of opinion that these sketches show all the essential features found in that patent, and that they adequate ly represent and illustrate all the essential features covered by Ligowsky’s application for a patent filed June 20, 1889. The practical knowledge of this witness entitles him to a great deal of weight, and the very clear way in which, under a very trying and prolix cross-examination, he vindicated his technical knowledge of the matters here involved, serves to give his testimony additional weight.
Mr, Frederick Holz was likewise a practical machinist, and acquainted with the old form machine, both in construction and mode of operation. He was the superintendent of the Cincinnati Hcrew & Tap Company, and Hisey’s work in remodeling the old I'eters machines ivas done under his supervision. Mr. Holz was of opinion that any skilled mechanic, technically acquainted with the old form of machine, could, aided by these Ligowsky sketches, construct a machine embodying the endless belt idea, and adapt the same to the old loading tools and other devices of the old art. He thought that he himself would have no difficulty to overcome in building such a machine which could not be removed by tin* exercise of purely mechanical skill and technical knowledge.
William S. Bates, a mechanical expert of considerable experience, has also testified favorably to the adequacy of these sketches as a guide in the construction of a machine when supplemented by a technical acquaintance with the Peters machines and mere mechanical skill. This witness was also of opinion that the photographs of the machine made by Hisey and Tenner in Germany, and which were confessedly used by Ligowsky and the draftsman who aided in the preparation of his drawings and specifications for his application for a patent, show substantially the devices
It is deemed unnecessary to enter upon a critical consideration of the alleged defects in these sketches, whatever they are, although some of them seem quite serious. The experts examined in favor of complainants’ view of the case have strongly presented the reasons in support of an opinion that these sketches are so imperfect and vague as to require one undertaking to construct such a machine by their guidance to further exercise the inventive faculty. On the other hand, the opposing experts are equally clear in opinion that the sketches are sufficiently clear and complete to enable one familiar' with the old art to construct such a machine, and properly arrange the loading tools and other devices of the Peters machine, in combination with the novel features illustrated by the sketches, and covered by the claims of Ligowsky put in interference.
It has been asked why Ligowsky laid aside his sketches, and ceased to work out his conception; and the suggestion is made that he found himself confronted with mechanical problems which he could not solve, and had therefore abandoned his conception as not practical. This suggestion has its weight, but is seemingly met by his own account of the matter, which, in substance, is this: First. That he endeavored to interest the Peters Company in his invention without result, his information from Holz being that they were not likely to throw away all their labor on their own invention to 'try another experiment. Second. He was a poor man, without capital to construct a machine or push his invention. Third. He was, on his evidence, steadily endeavoring to get Hisey to take up the conception, and combine it with what he then supposed to be Hisey’s new round table machine. That Hisey knew all that Ligowsky had developed is true on Ligowsky’s evidence, ■ and is .in accord with what we should expect from a knowledge of human conduct. They were both speculative inventors, exceedingly intimate, as a consequence of their interest in cartridge loading machinery. That they should fully discuss all the advantages and disadvantages of this new idea is just what we should expect, and just what occurred, according to Ligowsky. The latter says that he explained his conception to Hisey, with the old machine present, and illustrated his conception with chalk sketches made at the shop. To a quick, smart mechanic like Hisey, such an oral explanation, aided by the exhibited sketches, or by chalk sketches, was quite sufficient to put him in full possession of the whole idea. There is a sense in which Hisey’s original drawing No. 1, of May 10, 1888, is properly to be regarded as an expression by Ligowsky of his conception. If that was drawn as an expression of Ligowsky’s plan, only changing the location of the driving power, then it is but another document illustrating the progress of the. invent- or. and the clearness and fullness with which he. had. disclosed
The line hi1 tween that which is invention and that which is but the exercise of mere mechanical skill is sometimes difficult to trace. But we have come from the reading of the arguments of counsel, and the disquisitions of the experts, with a more or less decided impression that that which remained imperfect in the Ligowsky sketches was remediable by the exercise of ihe technical knowledge of mechanics familiar with the construction and operation of the old Peters machine. It certainly is not clear that the defects which are observable In those sketches are greater than would be found in any rough experimental drawings of complicated machinery, — drawings not intended to do more than suggest what was then in the mind of the inventor. This impression requires that that which has been done shall stand. The complainant has not produced that “thorough conviction” that he is the first inventor of these improvements, which he must do to justify a decree annulling the deliberate and well-considered action of the patent office. The assumption that Ligowsky did and said all That is ascribed to him leads to the conviction that all the knowledge which Hisey had when lie produced his original drawing of May 10, 1888, or his working drawings in the summer of that year, was derived from Ligowsky, and that the disclosures to him were .sufficiently full and clear to enable him, as a good mechanic, to complete that which was defective, and construct a machine upon the description which had been given him. There are many inexplicable things tending to cast a doubt as to who is the first inventor. gome of them wre have stated, and others have not been specifically referred to. On the whole case, however, we lean to ihe correctness of the judgment of the circuit court, and of the action of the patent office. This mental attitude is one which requires that the decree of the circuit court shall stand. It is therefore affirmed, with costs.