576 F. Supp. 2d 1030 | D. Minnesota | 2008
ORDER ON CROSS-MOTIONS FOR SUMMARY JUDGMENT
I. BACKGROUND
On October 24, 1996, Gary Gustafson filed a patent application covering an apparatus for cutting metal tubing with a laser. The application issued on December 22, 1998 as United States Patent No. 5,852,277 (the '277 patent). The patented apparatus is specifically designed for cutting stents, which are short, thin-walled, perforated sections of metal tubing that are implanted in fluid-carrying tubes in the body — generally arteries, but also veins, ducts, and ureters, among other things — to keep those tubes open.
Gustafson assigned his rights in the '277 patent to plaintiff Spectralyties, Inc. Spec-tralytics makes stent-cutting machines, but it has not been very successful in the stent business, either as a supplier of stent-cutting machines or as a manufacturer of stents. Defendant Norman Noble, Inc. (“Noble”), by contrast, has been a very successful manufacturer of stents, which it cuts on machines made by Noble itself. Noble sells stents to defendant Cordis Corporation (“Cordis”).
Spectralyties believes that Noble has not come by its success honestly. Specifically, Spectralyties contends that at least one model of Noble’s stent-cutting machine infringes the '277 patent.
All of the parties move for summary judgment. Spectralyties asks the Court to rule that the accused Noble machines literally infringe claim 1 of the '277 patent, that certain disputed references are not part of the prior art, and that claim 1 of the '277 patent is not invalid as either anticipated or obvious.
For the reasons given below, the Court grants summary judgment to Spectralyties that the '277 patent is not invalid as anticipated. The Court denies summary judgment to Cordis that the '277 patent is invalid as obvious — -although, as the Court will explain, the Court believes that Cordis will likely prevail on this issue at trial. The Court’s holdings with respect to the subsidiary questions about the content of the prior art are described below. The Court denies both Cordis’s and Spectralyt-ics’s motions for summary judgment with respect to infringement.
II. ANALYSIS
A. Standard of Review
Summary judgment is appropriate “if the pleadings, the discovery and disclosure materials on file, and any affidavits show that there is no genuine issue as to any material fact and that the movant is entitled to judgment as a matter of law.” Fed.R.Civ.P. 56(c). A dispute over a fact is “material” only if its resolution might affect the outcome of the suit under the governing substantive law. Anderson v. Liberty Lobby, Inc., 477 U.S. 242, 248, 106 S.Ct. 2505, 91 L.Ed.2d 202 (1986). A dispute over a fact is “genuine” only if the evidence is such that a reasonable jury could return a verdict for either party. Ohio Cas. Ins. Co. v. Union Pac. R.R., 469 F.3d 1158, 1162 (8th Cir.2006). In considering a motion for summary judgment, a court “must view the evidence and the inferences that may be reasonably drawn from the evidence in the light most favorable to the non-moving party.” Winthrop Res. Corp. v. Eaton Hydraulics, Inc., 361 F.3d 465, 468 (8th Cir.2004).
1. Claim Construction
In November 2006, the parties filed a joint claim-construction statement in which they set forth agreed-upon constructions for two claim terms in the '277 patent (as well as one claim term in the no-longer-asserted '653 patent). Joint Claim Constr. Stmt. [Docket No. 45]. The parties did not identify any claim language that remained in dispute, and they agreed that a claim-construction hearing was unnecessary. Id. at 5.
As it turns out, however, two claim terms are in dispute. Spectralytics’s infringement case turns largely on the meaning of the words “sized to be” in the phrase “the bushing having a central bore which is sized to be slightly greater than an outside diameter of the stock tubing.” '277 Pat. col. 6:20-23. And Cordis’s invalidity case depends in part on the meaning of the words “rigidly carried on” in the phrase “a workpiece fixture rigidly carried on the cutting tool in a fixed spatial arrangement. ...” Id. col. 6:8-9. The parties argue in their summary-judgment briefs for their favored claim constructions.
Courts, not juries, construe patent claims. Markman v. Westview Instruments, Inc., 517 U.S. 370, 391, 116 S.Ct. 1384, 134 L.Ed.2d 577 (1996). Language in a particular claim must be construed in the context of both that claim and the entire patent, including the specification. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed.Cir.2005) (en banc). Indeed, the specification, read in light of the prosecution history, is the primary basis for construing patent claims. Id. at 1315. Courts may also rely on “extrinsic evidence” — everything other than the patent and its prosecution history — but that evidence is secondary to the intrinsic evidence. Id. at 1317.
In general, claim language means what that language would have meant, ordinarily and customarily, to a person of ordinary skill in the art at the time the patent application was filed. Id. at 1312-13. In some cases, the ordinary and customary meaning of claim language to a person of ordinary skill in the art may be identical to the meaning of that language to a lay person who is not skilled in the art. Id. at 1314.
It appears likely that, for purposes of this case, the person of ordinary skill in the art is a mechanical engineer. Spectra-lytics has agreed, for purposes of its affirmative motion, with Cordis’s proposed definition that a person of ordinary skill in the art is “a person with an undergraduate degree in mechanical engineering or equivalent technical training and/or an equivalent amount of industry experience and familiarity with tooling and fixturing.” Spectralytics SJ Mem. at 33. Meanwhile Cordis has agreed, for purposes of its affirmative motion, with Spectralytics’s proposed definition that a person of ordinary skill in the art is someone with “at least a Bachelor of Science degree in mechanical engineering (including materials science or metallurgy), industrial engineering, or physics, or an equivalent amount of industrial experience and training, and at least one of (a) the use of industrial (cutting) lasers and (b) the practice of cutting stents.” Cordis SJ Mem. at 12.
Given these counter-concessions, it seems that — for present purposes — a person of ordinary skill in the art is anyone who meets either party’s definition of such a person. Cordis’s definition may be a little broader than Spectralytics’s, but the parties’ definitions are very close, and nothing seems to turn on the differences between them. The parties have submitted the testimony of a number of witnesses on the claim-construction issues. With one
Spectralytics’s argument with respect to the phrase “sized to be” is based mainly on its interpretation of Federal Circuit case law. See Spectralytics SJ Mem. at 15-17. Spectralytics also supports its argument with the testimony of two mechanical engineers, the testimony of Nixon (a lawyer who, as noted, is not a person of ordinary skill in the art), and an analogy based on “[c]ommon sense and real world experience ....” Id. at 19-20.
Cordis’s argument about “sized to be” is phrased in terms of the distinction between a “clearance fit” and an “interference fit,” but Cordis’s witnesses explain that distinction in terms that any educated layperson could understand. See Cordis Mem. Resp. Spectralytics Mot. S.J. (“Cor-dis SJ Opp.”) at 13-17 [Docket No. 120], Speaking very roughly, and using the example of an object placed inside a tube: The fit between the object and the tube is a “clearance fit” if there is space or “clearance” between the outer surface of the object and the inner surface of the tube, such that the object can move around inside the tube. Thus, if a one-inch-square sponge is inserted into a two-inch-square tube, the two objects will have a clearance fit. The fit between the object and the tube is an “interference fit” if the outer surface of the object touches the inner surface of the tube, such that there is friction or “interference” between the object and the tube. Thus, if a three-inch-square sponge is compressed into a two-inch-square tube, the two objects will have an interference fit; the object will not move around inside the tube.
The parties’ arguments with respect to the phrase “rigidly carried on” are even less technical. The words “carried on” are ordinary English words, and both Spectra-lytics and Cordis base their proposed claim constructions primarily on the language of the '277 patent itself. Spectralytics SJ Mem. at 29-30; Cordis SJ Mem. at 15-17.
a. Disputed Tenn 1: “sized to be”
The Court construes the term “the bushing having a central bore which is sized to be slightly greater than an outside diameter of the stock tubing” as follows:
A bushing has “a central bore which is sized to be slightly greater than an outside diameter of the stock tubing” if, after the stock tubing has been inserted into the bushing’s central bore, the bore’s inner diameter is slightly greater than the stock tubing’s outer diameter.
Cordis argues that this term should be construed to refer to a machine designer’s intentions rather than to the machine’s actual operation. Cordis SJ Mem. at 35 (“The claim is addressed to the selection of a bushing that is intended to be larger in diameter than the tubing....”). According to Cordis, any other construction reads the term “sized to be” out of the claim. Id.
The Court disagrees. The word “sized,” like the word “painted” (or any other past-participial adjective), can describe an item’s current state. Consider: “Last week, the body shop painted my car. My car is now painted.” Cordis’s proposed construction overlooks this simple fact, and fails to account for the two words after “sized”: “to be.” Although “sized” is a
To support its proposed construction, Cordis asserts that claim 1 “is about a clearance fit, and not an interference fit.” Id. at 36. Cordis may be right — but this is a noninfringement argument, not an argument supporting Cordis’s strained claim construction. Even as construed by the Court, this term of claim 1 requires that the central bore’s inner diameter be “slightly greater than” the stock tubing’s outer diameter. According to Cordis, in the accused machine, after the stock tubing has been inserted into the bushing’s central bore, the bore’s inner diameter is identical in size to — and not slightly greater than — the tubing’s outer diameter. Id. at 31-32. If Cordis is correct (and, as explained below, that will be for the jury to determine), then Cordis’s accused machine does not literally infringe. But infringement must be measured when the device is assembled; it does not depend on subjective, pre-assembly intentions.
b. Disputed Term 2: “rigidly carried on”
The Court construes the term “workpiece fixture rigidly carried on the cutting tool” as follows:
The workpiece fixture is “rigidly carried on the cutting tool” if the workpiece fixture is both rigidly attached to and supported by the cutting tool.
Spectralytics contends that the term “rigidly carried on” means “supported by, hanging from, or suspended from.” Spec-tralytics SJ Mem. at 29. The last five words of Spectralytics’s proposed construction are superfluous: to “hang from” or be “suspended from” something is just one way to be “supported by” that thing. (It is to be supported from above.) Because “supported by” is broader than, and entirely encompasses, “hanging from” and “suspended from,” Spectralytics’s proposed construction boils down to this: “rigidly carried on” means “supported by.” The Court agrees with this, as far as it goes, but believes that it is too broad given the actual claim language and the intrinsic evidence.
The Court does not, however, adopt Cor-dis’s proposed construction. Cordis argues that “rigidly carried on the cutting tool” means “rigidly mounted or affixed to the laser cutting tool.” Cordis SJ Opp. at 24. That, too, is fine as far as it goes. But Cordis is cagey about the meaning of its proposed construction. On the one hand, Cordis says that the disputed claim language covers a workpiece fixture that is “rigidly mounted or affixed to the laser cutting tool.” Id. (emphasis added). On the other hand, Cordis apparently believes that under this construction, a workpiece fixture would be “carried on” a laser cutting tool even if the fixture were not attached to the laser cutting tool, but instead the fixture and the tool were each rigidly attached to a third structure, such as the top of a table. Cordis SJ Mem. at 18 (comparing the patented machine to apparatuses in which a cutting tool and a workpiece fixture are “part of a unified tool frame” and explaining that “[t]he connection between these structures [i.e., the workpiece fixture and the cutting tool] is rigid because the tool frame joins them together as a single piece”).
The Court’s claim construction is supported by the plain language of the claim and the intrinsic evidence. Construing the disputed claim language “involves little more than the application of the widely accepted meaning of commonly understood words,” and therefore “general purpose dictionaries may be helpful.” Phillips, 415 F.3d at 1314.
To begin with, the verb “to carry” means “to hold or support while moving; bear.” American Heritage Dictionary of the English Language 285 (4th ed. 2000) (“AHD Fourth ”) (entry 1 for transitive verb “carry”); see also Webster’s Third New International Dictionary 343 (1981) (defining “carry” to mean “to move while supporting (as in a vehicle or in one’s hands or arms)”). “Carry” also means “[t]o support the weight or responsibility of,” as in “a beam that carries the floor.... ” AHD Fourth 285 (entry 7b for transitive verb “carry”). Thus, a workpiece fixture is “carried on” a cutting tool only if the cutting tool supports — i.e., bears the weight of — the fixture.
This interpretation is consistent with both uses of the words “carried on” in claim 1 of the '277 patent. Claim 1 covers not just a “workpiece fixture rigidly carried on the cutting tool,” but also “a generally horizontal bushing carried on the fixture body....” '277 Pat. col. 6:8, col. 6:19-20. Figures 2 through 4 of the '277 patent all show a fixture body in which the horizontal bushing is embedded; the fixture body thus necessarily supports the bushing that claim 1 describes as “carried on” the fixture body.
Further, the workpiece fixture is “rigidly carried on” the cutting tool only if the fixture and the cutting tool are, according to the Court’s claim construction, “rigidly attached” to each other. This rigid-attachment requirement is evident from the claim language as well as the various descriptions of the patented invention found throughout the '277 patent specification. For instance, the “Background of the Invention” section of the specification ends with this paragraph:
The apparatus of this invention comprises a workpiece fixture for holding the tubing beneath the laser cutting tool and for supporting the tubing in a cantilever fashion. The workpiece fixture is rigidly affixed to the laser cutting tool. Thus, bumping either the cutting tool or the fixture does not disturb the accuracy of the cut part as the two move together, again increasing the accuracy and yield of the manufacturing method of this invention.
’277 Pat. col. 2:19-27 (emphasis added).
Other passages in the specification, though using different language to describe the invention, are consistent with the quoted paragraph and the Court’s claim construction. In describing the
The prosecution history likewise supports the Court’s claim construction. The patent examiner rejected an earlier version of claim 1 as anticipated by Japanese patent 8-187595 to Sato. PTO Office Action (Mar. 4, 1998) at 3.
The patent examiner also rejected an earlier version of claim 1 as anticipated by United States Patent No. 5,026,965 to Ohe. In doing so, the examiner said that Ohe showed “a workpiece fixture ... rigidly carried on the cutting tool in a fixed spatial arrangement____” PTO Office Action (Mar. 4, 1998) at 4. Ohe depicts a laser cutting head attached directly to a bracket through which tubing travels as the laser cuts holes in the tubing. Merrill Decl. Ex. 39 [Docket No. 108]. Like Sato, Ohe shows a workpiece fixture (the bracket) that is “both rigidly attached to and supported by the cutting tool.”
2. Infringement
The parties agree that the accused device meets all of the limitations of claim 1 of the '277 patent save the requirement that the bushing have “a central bore which is sized to be slightly greater than an outside diameter of the stock tubing.” '277 Pat. col. 6:21-23; Cordis SJ Mem. at 33-36; Spectralytics SJ Mem. at 13-20. Under the Court’s construction of claim 1, to meet this limitation, the bushing in the accused device must, after the stock tubing is inserted, have an inner diameter that is slightly greater than the outer diameter of the tubing.
Spectralytics argues that the inner diameter of the bushing in the accused device is necessarily greater than the outer diameter of the inserted tubing; otherwise, says Spectralytics, the tubing would not fit into the bushing. Spectralytics SJ Mem. at 16 (“In the [accused] stent cutting machine, the Teflon core [i.e., the bushing] and the tube cannot occupy the same space.”); id. at 19 (“Defendants have simply taken advantage of the elastic properties of Teflon to create a snug fit between the bushing and the stock tubing. They
The Court finds that the relative sizes of the bushing’s inner diameter and the tubing’s outer diameter are disputed questions of fact. On the one hand, the Court has no reason to reject the testimony of Cordis’s witnesses on the subject. See Merrill Decl. 1 Ex. 27 at 32 (“Miller Dep.”) [Docket No. 108] (“As we got into the Teflon we actually brought the clearance down to zero ....”); id. at 105-07; Merrill Decl. 2 Ex. 64 at 78 (“Przeracki Dep.”) [Docket No. 121] (“You want it [i.e., the bushing] to be the same size as the tubing.”). On the other hand, the Court also has no reason to reject the testimony of Spectralytics’s expert, Patrick Madsen, who is a person of ordinary skill in the art, and who testified that when the accused device is in use, “the central bore of the bushing must necessarily be slightly greater than the diameter of the tubing. Otherwise the tubing could not slide through the bushing.” Rigby Decl. Ex. 96 at 8 (“Suppl. Madsen Report”) [Docket No. 95]. Mad-sen bases this conclusion on his belief that “a basic law of physics” would prevent tubing from sliding through a bushing if the tubing’s outer diameter equaled the tubing’s inner diameter. Id. at 9.
The Court is skeptical (but does not decide) that Cordis’s description of the relationship between the tubing and the bushing in the accused device in fact runs contrary to “a basic law of physics.” Spec-tralyties seems to think that because the tubing and the bushing in the accused device are made of separate materials, there must be space between them. This is necessarily true at some molecular level — but at the molecular level, all matter is mostly empty space. See Harald Fritzsch, Elementary PaHicles: Building Blocks of Matter 16 (2005) (“When we touch the surface of a diamond, we gain the impression that it is a very dense bit of matter. And so it actually is — but its very hard appearance is due to a combination of electrical forces acting between the nuclei and the electrons. A diamond ultimately consists of mostly empty space.... ”). Put another way, at a molecular level, nothing touches; space separates everything. But this does not prevent things from being solid, or from touching each other, at the level that matters to mechanical engineers. Accordingly, if the outer surface of the tubing is compressed against the inner surface of the bushing to such an extent that they are touching each other along their entire lengths at the scale that matters to mechanical engineers, then the inner diameter of the bushing could very well equal (as opposed to slightly exceed) the outer diameter of the tubing.
In any event, Cordis has admissible evidence that the inner diameter of the bushing is not greater than the outer diameter of the tubing in the accused device. Spec-tralytics has admissible evidence to the
3. Validity
Cordis argues that the '277 patent is obvious under the undisputed facts, and that Cordis is therefore entitled to summary judgment that the patent is invalid under § 103 of the Patent Act. 35 U.S.C. § 103. Speetralytics argues that the '277 patent is not obvious under the undisputed facts, and that Speetralytics is therefore entitled to summary judgment that the patent is not invalid under § 103. Spec-tralytics also moves for summary judgment that the '277 patent is not invalid as anticipated under § 102 of the Patent Act. (Cordis has not moved for summary judgment on the question of anticipation.)
Whether the '277 patent is invalid as anticipated or invalid as obvious depends on the content of the prior art. Thus, in support of their arguments about validity, the parties ask the Court to determine whether particular references are part of the prior art. The Court first addresses the parties’ arguments about the content of the prior art, and then turns to their arguments about anticipation and obviousness.
a. Prior Art
(1) Applicable Principles of Law
Sections 102(a), (b), (e), and (g) of the Patent Act describe various types of prior art that can render a patent invalid as anticipated under § 102 and that are relevant to whether a patent is obvious under § 103. 35 U.S.C. §§ 102, 103; Riverwood Int’l Corp. v. R.A. Jones & Co., 324 F.3d 1346, 1354 (Fed.Cir.2003) (“The term ‘prior art’ as used in section 103 refers at least to the statutory material named in 35 U.S.C. § 102.”).
Under § 102(b), a reference can count as prior art only if the reference existed before the “critical date” of one year before the filing date of the patent application.
Under §§ 102(a), (e), and (g), however, the temporal scope of the prior-art universe depends on the date on which the patentee made his invention.
Because patents are presumed to be valid, challengers bear the burden of proving a patent’s invalidity by clear and convincing evidence. 35 U.S.C. § 282 (“A patent shall be presumed valid.”); TypeRight Keyboard Corp. v. Microsoft Corp., 374 F.3d 1151, 1157 (Fed.Cir.2004) (“The party seeking to invalidate the patent must do so by clear and convincing evidence.”). This allocation of the burden of proof makes sense when an alleged infringer attempts to prove invalidity under § 102(b) by establishing that a particular reference is prior art — i.e., that it existed before the critical date — and that the reference anticipates the claimed invention. But this allocation of the burden of proof makes less sense when an alleged infringer attempts to prove anticipation under §§ 102(a), (e), or (g) and invalidity turns on whether an
When a patentee’s invention date is in dispute, common sense dictates that the patentee' — the person who knows when he conceived the invention and what he did to reduce it to practice — should bear the burden of proving an invention date that predates the patent-application date. In addition, because the PTO does not generally make any findings about a patentee’s invention date in the course of examining a patent application, the mere fact that the PTO has granted a patent provides no reason for a court or a jury to defer to the patentee’s contentions about his invention date. Such contentions should be treated like any other argument about a disputed issue of fact and evaluated in light of the relevant evidence.
Typically, the PTO does not look at evidence about a patentee’s invention date. It has no reason to do so in many cases. But sometimes during the prosecution of a patent, the PTO will assert that a particular reference invalidates the claimed invention. If that reference is not § 102(b) art — that is, if it is dated in the year between the critical date and the patent-application date — the patent applicant may antedate the reference (“swear behind” it, in patent-lawyer jargon) by filing an affidavit under PTO Rule 131 asserting an earlier invention date.
The showing of facts shall be such, in character and weight, as to establish reduction to practice prior to the effective date of the reference, or conception of the invention prior to the effective date of the reference coupled with due diligence from prior to said date to a subsequent reduction to practice or to the filing of the application. Original exhibits of drawings or records, or photocopies thereof, must accompany and form part of the affidavit or declaration or their absence must be satisfactorily explained.
37 C.F.R. § 1.131(b). The PTO examines an applicant’s affidavit for compliance with this rule, but the PTO does not otherwise investigate the applicant’s assertions about his invention date. See MPEP § 715; Loral Fairchild, 266 F.3d at 1366 (Newman, J., concurring) (“Inventors’ affidavits have always been admissible to antedate a reference. The regulations are explicit that evidence to antedate a reference may be provided by the inventor....”). Given the limited nature of the PTO’s scrutiny of an inventor’s Rule 131 affidavit, there is little reason for courts to defer to findings about invention dates made by the PTO during patent prosecution.
Requiring a patentee to bear the burden, when litigating his patent’s validity, of establishing an invention date preceding his patent-application date would also be consistent with the Federal Circuit’s recent decision in PowerOasis, Inc. v. T-Mobile USA, Inc., 522 F.3d 1299 (Fed.Cir.2008). In PowerOasis, the accused in-fringer (T-Mobile) argued that the patents in suit were anticipated by a reference (the MobileStar Network) that was prior art under § 102(b) because it existed more than one year before June 15, 2000 — the date on which the patentee (PowerOasis) had filed the continuation-in-part (CIP) application that resulted in the patents in suit. Id. at 1302-03.
The district court rejected Power Oasis’s argument, holding that the priority date— that is, the effective patent-application date — of the patents in suit was June 15, 2000 (the date of the CIP application). Id. On appeal, PowerOasis argued that the district court should have required T-Mobile (as the party asserting invalidity) to prove that PowerOasis was not entitled to the February 1997 priority date, instead of placing on PowerOasis the burden of proving that the patents in suit were entitled to the February 1997 priority date. Id. at 1304. In affirming the district court’s judgment and rejecting PowerOasis’s argument, the Federal Circuit said:
[I]n this case, the PTO did not, at any point, make any determination with regard to the priority date of the various claims of the asserted patents.... The Mobile Star Network prior art was never considered by the examiner. In fact, in this case the PTO did not make a determination regarding the priority date for the asserted claims with respect to any reference....
When neither the PTO nor the Board has previously considered priority, there is simply no reason to presume that claims in a CIP application are entitled to the effective filing date of an earlier filed application. Since the PTO did not make a determination regarding priority, there is no finding for the district court to defer to.
Id. at 1304-05.
The court noted that T-Mobile (the accused infringer) bore the burden of proving invalidity by clear and convincing evidence. But the court applied the elear- and-convincing-evidence requirement to what it called T-Mobile’s “prima facie case”:
T-Mobile, the party asserting invalidity, must still show by clear and convincing evidence that the asserted patent is invalid. Once it has established a prima facie case of invalidity and its burden is met, the party relying on validity is then obligated to come forward with evidence to the contrary.
Id. at 1305 (quotation marks omitted). The court found that T-Mobile “established its prima facie case of invalidity” based on undisputed evidence that the Mo-bileStar Network existed more than a year before the filing date of the CIP application. Id. With respect to the parties’ burdens of proof, the court held:
Once T-Mobile established by clear and convincing evidence that the Mo-bileStar Network was § 102(b) prior art to the asserted claims of the '658 and '400 patents, the burden was on PowerOasis to come forward with evidence to the contrary. The district court therefore correctly placed the burden on PowerOasis to come forward with evidence to prove entitlement to claim priority to an earlier filing date.
Id. at 1305-06.
Just as the burden was properly on PowerOasis to establish a priority date earlier than the default priority date (in that case, the date of the CIP application),
But Federal Circuit case law about proof of invention dates, and dates of prior art, is not so simple or logical. When a paten-tee seeks to avoid a reference offered by a defendant as prior art under §§ 102(a), (e), or (g) by establishing an invention date earlier than the date of the reference, the patentee bears only a burden of production, not of persuasion. Mahurkar v. C.R. Bard, Inc., 79 F.3d 1572, 1577 (Fed.Cir.1996) (“Dr. Mahurkar offered evidence at trial to show that he invented the subject matter of the patent before publication of the Cook reference. He met his burden of production.”); see also Loral Fairchild, 266 F.3d at 1361 (applying Mahurkar). As long as the patentee produces evidence supporting his claim of an invention date earlier than the ostensible prior-art reference, the patentee need not persuade the factfinder of that invention date. Instead, the defendant must establish, by clear and convincing evidence, that the patentee’s invention date does not precede the date of the ostensible prior-art reference. Mahurkar, 79 F.3d at 1578.
This would be confusing enough: How can the defendant affirmatively prove a negative proposition (the invention was not made by a certain date)' — -and do so by clear and convincing evidence — when all of the proof of the affirmative proposition (when the invention was made) is likely to be in the opposing party’s hands? But it gets even more confusing, because the pat-entee, when attempting to avoid a defendant’s ostensible prior-art reference that predates the patent-application date but arguably postdates the patentee’s invention date, bears not an ordinary burden of production, but a heightened one. The patentee must do more than offer some
To apply this set of rules in determining whether a potentially invalidating reference offered by a defendant as prior art under §§ 102(a), (e), or (g) is in fact prior art, a court or a factfinder would have to ask a series of questions. (The Court defers for the moment consideration of which of these questions are for the judge and which are for the jury.) For simplicity’s sake, assume that the date of the reference is undisputed and predates the patent-application date. The first question would then be: Did the patentee produce some evidence of an invention date earlier than the date of the reference? The next question might be: Was the patentee’s evidence corroborated at all? The third question might be: How well was the pat-entee’s evidence corroborated — was it “sufficiently” corroborated? If the paten-tee’s evidence was “sufficiently” corroborated, the next question would be: Did the defendant prove by clear and convincing evidence that the patentee’s invention date did not precede the date of the purported prior-art reference? If so, the reference would be prior art. Only then would the factfinder turn to the substantive question whether the reference invalidated the patent.
The analysis becomes even more rococo when the date or the existence of the purported prior-art reference is in dispute. To establish that a purported prior-art reference existed on a certain date, a defendant must provide evidence that corroborates the reference’s existence at the relevant time. Adenta GmbH v. OrthoArm, Inc., 501 F.3d 1364, 1371 (Fed.Cir.2007) (“[A] patent cannot be invalidated based on one person’s testimony alone without corroborating evidence, particularly documentary evidence.”); Checkpoint Sys., Inc. v. All-Tag Sec. S.A., 412 F.3d 1331, 1337 (Fed.Cir.2005) (“[T]he corroboration rule ... is available in appropriate cases to protect patentees from invalidation of their patent based solely upon uncorroborated, testimonial evidence.”) Without such corroboration, the ostensible prior-art reference cannot be used to invalidate a patent.
Thus, if both the patentee’s invention date and the date and existence of an ostensibly invalidating prior-art reference are in dispute, the necessary inquiry goes something like this: Did the patentee provide sufficiently corroborated evidence of an invention date earlier than his patent-application date, and did the defendant provide sufficiently corroborated evidence that the proffered prior-art reference existed (and met the relevant criteria, such as being public, being in the right country, etc.) before the (sufficiently corroborated) invention date? If the answer is yes on both counts, does the reference invalidate the patent?
A further crucial issue is whether (and to what extent) questions about corroboration are legal questions for the judge or factual questions for the jury. Federal Circuit case law on the subject is not clear. In TypeRight Keyboard Corp. v. Microsoft Corp., the Federal Circuit seemed to say that the district court must independently determine whether the existence of a pri-
In TypeRight, the district court granted summary judgment that a patent was invalid as obvious in light of a prior-art reference (the “Marquardt document”) whose status as prior art was disputed by TypeRight (the patentee). 374 F.3d at 1155. The Federal Circuit reversed, holding that TypeRight was entitled to a jury determination of whether the Marquardt document was prior art, because a finding that the document was prior art depended on an assessment of the credibility of witnesses who testified on behalf of the defendant (Microsoft Corporation) about the document’s publication date. Id. at 1158 (“[Sjummary judgment was improper because genuine issues remain as to the credibility of Microsoft's] witnesses[’] testimony that the Marquardt document was publicly distributed in 1986.”). The Federal Circuit also held, however, that even if at trial the jury found Microsoft’s witnesses credible and concluded that the Marquardt document was indeed prior art, “the district court will still have to address whether the legal requirement of corroboration has been met.” Id. at 1159 (emphasis added).
More recently, however, the Federal Circuit held in Adenta that “[assessing the sufficiency of evidence which corroborates a witness’s testimony concerning invalidating activities has been analyzed under the ‘rule of reason’ test, and it is a jury question.” 501 F.3d at 1372 (emphasis added).
As best this Court can tell, the Federal Circuit means to establish two seemingly separate, but logically sequential, corroboration requirements. The first requirement is to be considered by the judge alone, and the second is to be considered by the jury, subject to the normal constraints on jury factfinding embodied in rules on judgment as a matter of law.
The question for the judge is: Is there any corroborating evidence at all — setting aside the quality and quantity of that evidence — on the issue in question (the status of a prior-art reference; a patentee’s invention date)? If not, then the jury has no business considering the issue.
If there is some corroborating evidence on the issue in question, then — at least when the question is the status of a prior-art reference — the issue must be submitted to a jury.
The Federal Circuit, however, said in Adenta that “assessing the sufficiency” of corroborating evidence “is a jury question” that “has been analyzed under the ‘rule of reason’ test....” 501 F.3d at 1372. It is difficult to know what the Federal Circuit meant, for two reasons. First, if the jury must decide whether clear and convincing evidence shows that a particular reference
Moreover, Adenta seems internally inconsistent. The Federal Circuit described the question of the sufficiency of corroboration as one for the judge, and then described the question as one for the jury. Adenta held, “[w]e cannot say that the [district] court erred in concluding that there was sufficient evidence corroborating [the witnesses’] testimony to enable the jury to find” that the purported prior-art reference was, in fact, prior art. 501 F.3d at 1372. How can the sufficiency of corroborating evidence be both a question for the judge and a question for the jury?
The answer, in this Court’s view, is that district judges do not, in fact, need
Courts routinely assess whether evidence is sufficient for a reasonable jury to find that a party has borne its burden of proof. If a court holds, despite the existence of some corroborating evidence, that a reasonable jury could not find that an ostensible prior-art reference was in fact prior art, one could describe the court’s action as “finding the corroboration insufficient” — but this description only muddles the analysis. In all cases, if the evidence (including corroborating evidence) is insufficient for a reasonable jury to find in favor of a party on an issue, a court will grant summary judgment or judgment as a matter of law against the party on that issue. There is no reason to put this in terms of whether “corroboration” is “sufficient.”
The Federal Circuit’s corroboration requirement thus has independent significance in only one situation: when uncorroborated witness testimony on an issue (the status of a prior-art reference; an invention date) would be sufficient, in the absence of the corroboration requirement, for a reasonable jury to find that the testimony proves the issue to the requisite standard of proof. In such a situation, if a judge finds that there is no evidence that independently corroborates the testimony, then the judge must find as a matter of law that the issue is not established, even though a reasonable jury could find the issue established by the requisite standard of proof.
To summarize, then, with reference to this case: If there is no evidence to corroborate the testimony of Spectralytics’s witnesses that, before the '277 patent-application date, Gustafson either (1) reduced the claimed invention to practice or (2) conceived of it and worked diligently to reduce it to practice, then the Court must find as a matter of law that Spectralytics has not met its burden of production with respect to establishing an invention date that predates the application date. But if there is such corroborating evidence, then Gustafson’s invention date is a question of fact for the jury, unless no reasonable jury could find, by clear and convincing evidence, that his invention date came after the date of the particular disputed reference.
With respect to prior-art references offered by Cordis, if there is no evidence to corroborate the testimony of Cordis’s witnesses about the existence or status of the ostensible prior art, then the Court must find as a matter of law that Cordis has not met its burden of production with respect to that prior art. But if there is corroborating evidence, then the existence or status of the ostensible prior art is a question of fact for the jury — again, unless no reasonable jury could find that Gustafson’s invention date came after the date of the particular disputed reference.
The Court applies these principles below. Before doing so, however, the Court takes this occasion to respectfully urge the Federal Circuit to revisit the extraordinarily complex set of rules that this Court has spent the past fifteen-plus pages trying (perhaps unsuccessfully) to decipher. Rules assigning burdens of production and proof — and dividing responsibilities between judges and jurors — have to be understood and applied by the ordinary mor-
(2) Published Patents that Predate the '277 Application Date
The parties dispute whether the prior art includes two United States patents (to Kash and Muhlniekel) and one Japanese patent (to Sato).
The first question for the Court is whether Spectralyties has met its burden of production with respect to Gustafson’s invention date. Specifically, has Spectra-lytics produced some corroborated evidence that, before April 2, 1996, Gustafson either (1) actually reduced his invention to practice, or (2) conceived his invention and worked diligently until his application date to reduce it to practice? Although it is a close question, the Court finds that Spec-tralyties has met its burden of production. There is corroborating evidence, in the form of a drawing, that Gustafson conceived of the invention no later than January 16,1996. Rigby Decl. Ex. 45. But the evidence of his actual reduction of the invention to practice, or his diligence in attempting to reduce it to practice, is more equivocal.
Cordis, in its summary-judgment reply brief, has abandoned its argument for summary judgment with respect to Gustaf-son’s invention date. Cordis Reply Mem. at 14 [Docket No. 139]. Instead, Cordis concedes that evidence presented by Spec-tralyties creates a fact question as to Gus-tafson’s invention date. Id.
Spectralyties, however, continues to press its argument for summary judgment that Kash and Sato are not prior art. Given that Spectralyties has met its burden of production with respect to an invention date earlier than April 2, 1996, the question for the Court is this: Could a reasonable jury find, by clear and convincing evidence, that Gustafson’s invention date did not come before April 2, 1996? Only if a reasonable jury could not possibly find, by clear and convincing evidence, that Gustafson’s invention date came after April 2, 1996 would Spectralyties be entitled to summary judgment that Kash and Sato are not prior art.
Spectralytics cites testimony of two of its employees (but not Gustafson) that the invention was working before the end of January 1996. Spectralytics Mem. Opp. Noble Mot. S.J. (“Spectralytics Opp. Noble SJ Mot.”) at 38/20 [Docket No. 124].
To the extent that Spectralytics argues that Gustafson actually reduced his invention to practice, there is a fact question as to whether the invention ever worked for its intended purpose. That purpose is not, as Spectralytics puts it, “to have the workpiece fixture (and bushing) carried on the laser head so that they were maintained in ‘a fixed spatial relationship’ and movement of one would also move the other.” Id. at 36/18; id. at 40/22 (characterizing the invention’s intended purpose as “keeping the workpiece fixture (and bushing) and laser head in ‘a fixed spatial relationship’ so that movement of one would also move the other”). If that was the invention’s purpose, the device would have been reduced to practice even if it never cut a single stent.
The '277 patent itself, however, tells us that the invention “is useful in manufacturing small, thin-walled', tubular devices known as stents....” '277 Pat. col. 1:7-8 (emphasis added). Further, the patent tells us that “[t]his invention relates to a method of and apparatus for cutting a pattern along the length of a thin walled, hollow workpiece, such as a stent, which is much more reliable and has much less scrap than known methods.” Id. col. 1:66— 67 to col. 2:1-2. An invention’s “purpose” is the thing for which it is useful; it is not the means by which it accomplishes that useful thing.
Directly attaching the workpiece fixture to the cutting tool and maintaining them in “a fixed spatial relationship” is therefore not the purpose of Gustafson’s invention. Rather, it is a means by which the invention achieves its purpose of cutting metal tubing more reliably, and with less scrap, than existing methods and devices. And because Spectralytics focuses in its briefs on establishing that the invention worked for the wrong intended purpose, Spectra-lytics has not established that Gustafson’s invention worked for its true intended purpose before he filed his patent application.
To the extent that Spectralytics argues for an invention date based on conception and diligence in reducing the invention to practice (as opposed to actual reduction to practice), there is a fact question as to Gustafson’s diligence. It is unclear from the record what Gustafson did to reduce
Given the state of the record, the Court cannot decide on summary judgment whether Kash, Sato, and Muhlnickel are prior art to the '277 patent. To establish that these patents are prior art, Cordis will have to convince the jury to find, by clear and convincing evidence, that the patents predate Gustafson’s invention date. Because the status of these patents as prior art is in dispute, the Court will not consider them in connection with Cordis’s invalidity arguments.
(3) The Accused Device
Spectralytics moves for summary judgment that the accused device is not prior art under § 102 because it was not public. Noble concedes the point. Noble Mem. Opp. Spectralytics Mot. S.J. (“Noble SJ Opp.”) at 3 [Docket No. 117] (“[Defendants agree that the Follower Assembly [i.e., the accused device] is not prior art under Section 102 because Noble maintained it as a trade secret.”). The Court therefore grants summary judgment to Spectralytics on this issue.
Noble further contends, however, that the accused device, although not prior art, is nevertheless relevant to the validity of the '277 patent. Id. at 36. Specifically, Noble argues that its development of the accused device “is relevant to the level of ordinary skill in the art, relevant to the motivation to combine, and [relevant] as a secondary consideration of obviousness.” Id. at 37.
Spectralytics apparently does not dispute the legal proposition that the accused device, even if not prior art under § 102, may nevertheless be relevant to obviousness under § 103. Instead, Spectralytics contends that there is insufficient corroborative evidence to prove that the accused device existed before Gustafson made his invention. Spectralytics Reply Mem. at 6-7 [Docket No. 142],
The Court will not consider the accused device in connection with obviousness, for two reasons. First, as the Court explains below, the Court finds that there is a dispute of fact over whether Noble stole trade secrets from Spectralytics. If Noble stole trade secrets related to the ’277 patent and used those secrets to develop the accused device, then Noble’s development of the accused device is extremely weak evidence that the '277 patent was obvious.
Second, the evidence is unclear as to exactly when the accused device was developed. Noble’s witnesses consistently testified that the accused device existed by late 1995, and their testimony is corroborated by evidence that in December 1995 Noble shipped stents cut with a complex geometry to a customer (SciMed). See Koehler Decl. Ex. J (“C. Noble Dep.”) at 43-49 [Docket No. 118]; id. at NNI — 00018-37 (C. Noble.Dep.Ex.17); Koehler Decl. Ex. K (“Miller Dep.”) at 27-29; Koehler Decl. Ex. N (“Przeraeki Dep.”) at 18-19. But the testimony of one witness, George Mackaronis, casts doubt on when the accused device existed. Mackaronis, Cor-dis’s Rule 30(b)(6) witness, testified that Cordis first approved a Noble stent-cutting machine in late 1996 or 1997. Rigby Decl. Ex. 123 (“Mackaronis Dep.”) at 48. He also said that in the Noble machine, as originally designed, the workpiece fixture was attached to a frame and not directly to the laser cutting head. Id. at 54-56. Later in the deposition, Mackaronis said that he had been describing a ComTal — made machine, not a Noble machine. Id. at 57-72. The Court cannot make sense of Mackaronis’s testimony, but his confusion is sufficient to create a dispute of fact about when the accused device existed.
(4) The 1994 LPL/RMS Machine
In 1993, a company known as RMS was cutting stents for Cordis using an older technique called electrical dis
Spectralytics moves for summary judgment that the prior art does not include a laser-cutting apparatus made sometime in 1994 by LPL for RMS. The Court grants the motion, for two reasons.
First, the Court agrees that Cordis has not provided any corroborating evidence of the existence of a 1994 LPL/RMS machine without a tailstock. Cordis’s witnesses testified that the machine did not include a tailstock. Dunbar Dep. at 36, 93-95. But the only documentary evidence corroborating the machine’s existence shows a tail-stock. Rigby Decl. Ex. 71 (“Dunbar Dep. Ex. 7”). Thus there is no corroborating evidence that in 1994, RMS used or LPL made a machine without a tailstock.
The existence of a 1994 LPL/RMS machine with a tailstock is, as noted, corroborated by documentary evidence. Dunbar Dep. Ex. 7. But no reasonable jury could find that the tailstock-bearing machine was sufficiently public to qualify as prior art under § 102. The machine was made by LPL for RMS, which was under contract with Cordis. There is no evidence that any of these entities intended to (or did) share the machine outside of their group.
Noble contends that because the security at RMS surrounding the machine was not airtight, the machine was in public use. Noble SJ Opp. at 21-22. The evidence cited by Noble shows, at most, that trades-persons and other non-Cordis personnel may have seen the machine when working in or walking through Cordis’s factory. Id. But this is mere speculation. The Court finds that RMS’s private use of the machine did not become public by virtue of some slight possibility that an outsider saw the machine in passing.
Accordingly, the Court finds that the prior art does not include a tailstock-less machine made by LPL for RMS in 1994. Further, because the existence of such a machine is uncorroborated, the Court holds that the existence of a tailstock-less 1994 LPL/RMS machine cannot be considered among the secondary considerations related to obviousness. But evidence that LPL/RMS designed a machine with a tail-stock in 1994 — a fact corroborated by documentary evidence — is both undisputed and relevant to secondary considerations of obviousness.
b. Anticipation
Spectralytics moves for summary judgment that claim 1 of the '277 patent is not anticipated. Spectralytics SJ Mem. at 30-31. Specifically, Spectralytics argues that neither the accused device nor the 1994 LPL/RMS device anticipates the claim. The Court agrees with Spectralytics.
As explained above, the accused device is not prior art because Noble — by its own
It is unclear whether Noble and Cordis deny Speetralyties’s contention that the 1994 LPL/RMS device does not anticipate claim 1. To support its argument against anticipation, Spectralytics asserts not only that, for reasons discussed above, the 1994 LPL/RMS device is not prior art, but also that the device, even if it is prior art, does not anticipate because it does not meet every limitation of claim 1 of the '277 patent. Spectralytics SJ Mem. at 30-31.
Cordis, in its brief opposing Spectralyt-ics’s summary-judgment motion, asserts that both obviousness and anticipation should be decided by a jury. Cordis SJ Opp. at 42. But neither Noble nor Cordis explains how the 1994 LPL/RMS device anticipates claim 1 of the '277 patent. Instead, they argue that the 1994 LPL/RMS device is prior art (or, at least, that the device’s status as prior art must be decided by a jury). Noble SJ Opp. at 11 (“Spectralytics’ contention that the 1994 LPL/RMS machine does not qualify" as prior art because it is uncorroborated and an undisclosed trade secret is similarly faulty.”); Cordis SJ Opp. at 42 (“The jury will likewise have to resolve whether the laser cutting machines designed by LPL and RMS constitute prior art.”). Because a finding that the 1994 LPL/RMS device is prior art would be necessary to, but not sufficient for, a finding that the device anticipates claim 1 of the '277 patent, Cor-dis and Noble have opposed only one aspect of Spectralytics’s anticipation argument.
The Court has already found that there is no evidence to corroborate the existence of a tailstock-less 1994 LPL/ RMS machine. The Court agrees with Spectralytics (and Cordis and Noble do not appear to deny) that an LPL/RMS machine with a tailstock does not anticipate claim 1 of the '277 patent. In particular, claim 1 requires a “cantilever support being located on just one side of the laser beam with ... the tubing being unsupported on the other side of the laser beam.” '277 Pat. col. 6:10-16. The LPL/ RMS machine with a tailstock, as depicted in Exhibit 7 to the Dunbar deposition, does not meet this limitation and therefore does not anticipate claim 1 of the '277 patent. The 1994 LPL/RMS machine also does not anticipate claim 1 of the '277 patent because, as noted above, it was not sufficiently public to be prior art under § 102.
c. Obviousness
Cordis contends that the undisputed evidence establishes that the '277 patent is obvious and therefore invalid under 35 U.S.C. § 103. Cordis SJ Mem. at 1-23. Spectralytics contends that the undisputed evidence establishes that the '277 patent is not obvious. Spectralytics SJ Mem. at 31-37. Both Cordis and Spectralytics move for summary judgment on the issue of obviousness. Although Cordis’s motion is far stronger than Spectralyties’s, the Court ultimately agrees with neither party and finds that the patent’s obviousness must be determined at trial.
In the Federal Circuit’s familiar formulation, whether a claimed invention is obvious is a legal conclusion that depends on underlying factual findings. See, e.g., Alza Corp. v. Mylan Labs., Inc., 464 F.3d 1286, 1289 (Fed.Cir.2006). The Supreme Court, in Graham v. John Deere Co. of Kansas City, set out the factual issues that underlie the question of obviousness:
Under § 103, the scope and content of the prior art are to be determined; differences between the prior art and the claims at issue are to be ascertained; and the level of ordinary skill in the pertinent art resolved. Against this background the obviousness or nonobviousness of the subject matter*1055 is determined. Such secondary considerations as commercial success, long felt but unsolved needs, failure of others, etc., might be utilized to give light to the circumstances surrounding the origin of the subject matter sought to be patented.
383 U.S. 1, 17-18, 86 S.Ct. 684, 15 L.Ed.2d 545 (1966). In the recent landmark case of KSR International Co. v. Teleflex, Inc., the Court quoted this passage from Graham and affirmed that “[wjhile the sequence of these questions might be reordered in any particular case, the factors continue to define the inquiry that controls.” 550 U.S. 398, 127 S.Ct. 1727, 1734, 167 L.Ed.2d 705 (2007).
The Court discusses below the parties’ evidence with respect to the relevant factual issues. The Court then turns to the legal question of the obviousness of the '277 patent.
(1) Factual Issues
(a) Level of ordinary skill in the ant
As discussed above in connection with claim construction, Spectralytics and Cor-dis have each agreed, for purposes of their summary-judgment motions on obviousness, to adopt the other’s proposed definition of the person of ordinary skill in the art. Roughly speaking, the person of ordinary skill is a mechanical engineer by education or by trade who has experience in working with the general type of tooling involved in this case. The parties seem to agree that most of the witnesses on both sides count as persons of ordinary skill in the art. Accordingly, the Court has considered all of the testimony proffered by the parties on the question of obviousness, save the testimony of Larry Nixon.
(b) Scope and content of the prior art
As discussed above, the Court cannot decide on summary judgment whether the Kash, Muhlnickel, and Sato references are prior art. The Court has determined, however, that the accused device and the 1994 LPL/RMS device (with or without a tailstock) are not part of the prior art.
The prior art therefore includes laser-cutting machines — including such machines that were before the PTO during prosecution of the '277 patent — and Swiss-style cutting machines. The specific examples of Swiss-style cutting machines considered by the Court as part of the prior art include: (1) the Gorton pamphlet from 1945, Rigby Decl. Ex. 50 at 5; and (2) United States Patent No. 4,258,598 to Hoffman, issued in 1981 and applied for in 1979. Merrill Decl. Ex. 13.
The laser-cutting machines in the prior art include United States Patent No. 5,026,965 to Ohe. Merrill Decl. Ex. 39. As noted above in connection with claim construction, the patent examiner relied on Ohe to reject an earlier version of claim 1 of the '277 patent as anticipated. PTO Office Action (Mar. 4, 1998) at 4. The examiner also relied on Ohe in combination with United States Patent No. 2,339,986, issued in 1943 to Engert, to find other asserted claims invalid as obvious. Id.
(c)Differences between prior ant and the patented invention
The Swiss-style cutting machines, as exemplified in the Gorton reference, differ from the patented invention primarily in two respects: (1) the nature of the cutting tool, and (2) the nature of the attachment between the cutting tool and the workpiece support. Swiss-style machines use metal cutting tools rather than lasers. And in Swiss-style machines, the workpiece fixture is attached only indirectly to the cutting tool — though the indirect attachment is rigid, since both the cutting tool and the workpiece fixture are rigidly attached to a frame.
The laser-cutting machine shown in Ohe differs from the patented invention primarily in the nature of the workpiece sup
Unlike the workpiece fixture in Ohe, which supports the tubing being cut on both sides, the device claimed in the '277 patent supports the tubing being cut on only one side. Such one-sided or “cantilevered” support is precisely the type of support used in Swiss-style machines such as the machine shown in the Gorton pamphlet and in United States Patent No. 4,258,598 to Hoffman.
(d) “Teaching Away”
Spectralytics contends that the Swiss-style prior art “teaches away” from the patented invention. Spectralytics SJ Mem. at 34. In particular, Spectralytics stresses that in Swiss-style machines, the workpiece fixture and the cutting tool are not directly connected, as in the patented invention, but rather are separately attached to the same frame or mounted to the same platform. Id. at 33-34.
Spectralytics has identified no item of Swiss-style prior art that expressly teaches away from directly connecting a workpiece fixture to a cutting tool, and the Court would be tempted to dismiss Spec-tralytics’s teaching-away argument as implausible save for one thing: The argument is supported by the testimony of Paul Huber, one of Cordis’s expert witnesses on Swiss-style machines. Id. at 34. Huber testified that, in his opinion, the device claimed in the '277 patent would be less effective in minimizing vibration-related problems than a Swiss-style device. Rigby Decl. Ex. 120 at 147-48. Huber also agreed that the attachment depicted in the '277 patent between the workpiece fixture and the cutting tool seemed less rigid than the attachment in a normal Swiss-style machine. Id. at 150. And when asked whether, in that respect (i.e., with respect to the rigidness of the attachment between the workpiece fixture and the cutting tool), the ’277 patent was “contrary to the accepted teachings of Swiss automatic screw machines,” Huber agreed that it was. Id.
(e) Secondary considerations
Secondary considerations relevant to obviousness include the commercial success of the patented invention; whether it met long-felt but unsolved needs and, relatedly, whether others tried but failed to solve the problem; whether the patented invention gave unexpected results; and whether the patented invention received industry acclaim. See Eli Lilly & Co. v. Zenith Goldline Pharms., Inc., 471 F.3d 1369, 1380 (Fed.Cir.2006); see also Graham, 383 U.S. at 17, 86 S.Ct. 684.
With respect to commercial success, Spectralytics argues that Noble’s successful use of the accused device establishes the commercial success of the patented invention. Spectralytics SJ Mem. at 37. But the Court has held that whether Noble’s device infringes the '277 patent is a disputed question of fact. Moreover, there is a question of fact as to whether Noble’s success resulted from use of the accused device or from other factors, such as bringing all stent-related procedures in-house. See Mackaronis Dep. at 42 (“[0]ne of ... the most favorable things about Norman Noble was that they were providing a complete process. They were going to process the complete stent.”).
With respect to other secondary considerations, the Court finds that the record is unclear. There is evidence that Cordis spent a substantial amount of money and effort working with RMS and with Noble
(2) Legal Conclusion on Obviousness
Although this is a close question, the Court finds that sufficient disputes of fact exist with respect to the underlying factual issues that the Court cannot decide, on summary judgment, whether the '277 patent is an obvious combination of Swiss-style cutting machines and prior-art laser-cutting machines.
On the one hand, the differences between Swiss-style machines and the patented invention are relatively minor. Substituting one type of cutting tool (a laser) for another (a metal blade) is the type of substitution that .even a layperson would find obvious.
Further, in both the Swiss-style machines and the patented invention, the workpiece fixture and the cutting tool are, in the words of the patent, in a “fixed spatial relationship.” The main difference between Swiss-style machines and the patented invention is how that fixed relationship is achieved. In Swiss-style machines, it is achieved by rigidly connecting the cutting tool and the workpiece fixture to the same frame. In the patented invention, a fixed relationship is achieved by rigidly attaching the workpiece fixture directly to the cutting tool.
Whether this modification would have been obvious to one of skill in the art is a close question. Spectralytics’s best evidence that it would not have been obvious is the testimony of Huber, Cordis’s Swiss-machine expert. Spectralytics contends that Huber’s testimony shows that the Swiss art teaches away from attaching a workpiece fixture directly to a cutting tool as in the '277 patent. Spectralytics SJ Mem. at 34. Cordis points out in response that Huber’s testimony is not prior art. Cordis Reply Mem. at 8. Cordis also points to other testimony by Huber to the effect that he thought that combining Swiss-style machines and lasers was obvious. Id. But Huber’s testimony is, at best, ambiguous as to whether familiarity with Swiss-style art would have led a person of ordinary skill in the art to design a device like that claimed in the '277 patent.
Cordis has strong evidence that it would have been obvious to modify a Swiss-style machine by using a laser cutting tool and attaching the workpiece fixture directly to the cutting tool as in the '277 patent. The engineers at RMS, in the course of developing a laser-based stent-cutting machine, expressly considered modifying their existing machine to make it resemble a Swiss-style machine. Rigby Dep. Ex. 72 at CSP 0036368. This strongly suggests that someone trying to solve the problem of cutting intricate stents with lasers would have looked to Swiss-style machines for ideas.
This conflict in the evidence makes it difficult to determine, on motion for summary judgment, whether the approach of the '277 patent — attaching a workpiece fixture directly to a laser-cutting head and supporting the tubing being cut in a cantilever fashion — would have been obvious to a person of skill in the art. The question of obviousness is also made more difficult because there is a dispute of fact over whether Sato and Kash are part of the prior art. Sato, in particular, looks very much like the device claimed in the '277 patent (and indeed, the examiner initially rejected Gustafson’s claims over Sato). If Sato is part of the prior art, then the case for obviousness becomes very strong indeed.
On the state of the record, however— and especially in light of the Huber testi
C. Trade-Secrets Theft and Unfair Competition
Spectralytics brings claims against Noble for theft of trade secrets and unfair competition. It is clear from the complaint that the two claims are based on the same alleged facts. First Am. Compl. ¶ 34 (“NNI [i.e., Noble] has unfairly competed with Spectralytics by obtaining trade secret and other confidential information from NNI [sic; should be Spectralytics] and using that information for NNI’s commercial benefit and exploitation.”). Noble asserts that because the unfair-competition claim derives from the trade-secrets claim, the two claims stand or fall together. Noble SJ Mem. at 18 n. 20 [Docket No. 90]. Spectralytics agrees, at least for purposes of Noble’s summary-judgment motion. Spectralytics Opp. Noble SJ Mot. at 19/1 n. 15. Accordingly, the Court focuses on the trade-secrets claim.
Noble moves for summary judgment on Spectralytics’s trade-secrets claim on two grounds. First, Noble contends that the claim is barred by the statute of limitations. Noble SJ Mem. at 18-26. Second, Noble contends that there is no evidence that it had access to the trade secrets that it is accused of stealing, and thus no reasonable jury could find Noble liable. Id. at 26-30. The Court addresses each argument in turn.
1. Statute of Limitations
The Court assumes for purposes of Noble’s motion that Ohio’s four-year statute of limitations governs. Ohio Rev. Code. Ann. § 1333.66 (“An action for misappropriation shall be commenced within four years after the misappropriation is discovered or by the exercise of reasonable diligence should have been discovered.”). If the four-year Ohio statute of limitations has run — as Noble contends — then so has the shorter, three-year limitations period under Minnesota law. Minn.Stat. § 325C.06. The statute of limitations in each state embodies, in identical language, the discovery rule. Under that rule, the limitations period begins to run when a wrong is actually discovered or when the wrong “by the exercise of reasonable diligence should have been discovered.” Ohio Rev.Code. Ann. § 1333.66; Minn.Stat. § 325C.06.
The original complaint in this action was filed in July 2005, but Spectralytics did not bring a claim for trade-secrets theft against Noble until it filed an amended complaint on August 3, 2006. Accordingly, if Spectralytics knew or should have known of the alleged theft of trade secrets before August 3, 2002, its trade-secrets claim is untimely.
Noble contends that Spectralytics was put on notice of its claim against Noble by a segment of the “News Hour with Jim Lehrer” that aired on PBS in March 2001.
Spectralytics’s cofounder Gary Oberg saw this broadcast and “had a suspicion” that Noble (which was then making stents for Cordis) might be infringing the '277 patent. Rigby Decl. Ex. 44 (“Oberg Dep.”) at 170. It is less clear whether Oberg also suspected that Noble had stolen Spectralytics’s trade secrets. Because the broadcast aired in 2001, and because the '277 patent had issued roughly two and one-half years earlier, even if the machine shown in the broadcast infringed the '277 patent, that machine could have been developed from the patent alone rather than from stolen trade secrets. And when asked what his suspicion was after seeing the 2001 broadcast, Oberg said, “That they [Noble] were using this patent to their advantage.” Oberg Dep. at 186. Oberg did, however, also say that his suspicion of Noble was based in part on the “[proximity of [the Nobles’] visits to Spectralytics to when they were actually making stents” and on the fact that Jack Lundeen, a sales representative for Noble, had access to the Spectralytics facility. Id. at 187.
Suspicion is not the same as knowledge, though. See Sokol Crystal Prods., Inc. v. DSC Commc’ns Corp., 15 F.3d 1427, 1430 (7th Cir.1994) (holding, under Wisconsin trade-secrets act, that “concerns and suspicions rather than knowledge ” of trade-secrets misuse “do not start the clock of the statute of limitations”). Noble nonetheless argues that Oberg’s suspicions are equivalent to knowledge of trade-secrets theft because Spectralytics filed suit for patent infringement based on those suspicions. Noble SJ Mem. at 22.
This argument is too clever by half. For one thing, it is based on Noble’s assertion that if the March 2001 broadcast supported patent-infringement allegations, it “was also sufficient to support allegations of trade secret misappropriation.” Id. at 22. As already explained, this assertion is incorrect in light of the patent’s issuance in 1998; in theory, Spectralytics could have had strong reason to believe that the machine infringed its patent without having had any reason to believe that its trade secrets had been stolen. Further, Noble’s argument rests on the dubious proposition that the “knowledge” that permits a party to bring a trade-secrets claim without being sanctioned under Rule 11 of the Federal Rules of Civil Procedure is the same as the “knowledge” that triggers the running of the statute of limitations on that claim. Noble cites no authority supporting this proposition, and it would be surprising if this proposition were true, given that many claims that pass muster under Rule 11 are dismissed after discovery reveals them to be factually unsupported.
Noble also contends that even if the March 2001 broadcast did not give Spee-tralyties actual knowledge of the theft of its trade secrets, it nonetheless put Spec-tralytics on notice of the possible theft of its trade secrets. At that point, according to Noble, Spectralytics had the duty to investigate the possible theft. Id. at 23-25. Had it done so, and had it exercised reasonable diligence, it would have quickly discovered the alleged theft of its trade secrets. Thus, Noble argues, the statute of limitations began to run in March 2001.
The problem with Noble’s argument is that there is no evidence of what Spectra-lytics would have learned if it had exercised reasonable diligence in investigating its possible trade-secrets claim in March 2001. Noble has certainly not demonstrated that Spectralytics would have acquired
Without evidence that Spectralytics would have discovered facts on which to base its trade-secrets claim if Spectralytics had followed up on the suspicions aroused in Oberg by the March 2001 PBS broadcast, the Court cannot find that the statute of limitations on Spectralytics’s trade-secrets claims began to run in March 2001. Noble’s motion for summary judgment with respect to the statute of limitations is therefore denied.
2. Access
Noble contends that it is entitled to summary judgment on Spectralytic’s trade-secrets claim for a second reason: because no reasonable jury could find that Noble had access to the trade secrets that it is alleged to have stolen. Noble SJ Mem. at 26-30. The evidence supporting Spectralytics’s trade-secrets claim is indeed extremely weak, but the Court concludes that Spectralytics has barely enough evidence to escape summary judgment.
Spectralytics argues that Noble had access to its trade secrets in one of two ways: through observations made by Larry, Chris, and Scott Noble (the principals of Noble) during visits to Spectralyties’s facilities in 1996, or through observations made by a Noble sales representative, Jack Lundeen, who for a time was also a sales representative for Spectralytics. Spectralytics Opp. Noble SJ Mot. at 30/12 to 33/15.
The Court agrees with Noble that no reasonable jury could find that Noble had access to Speetralytics’s trade secrets through Lundeen. There is no dispute that Lundeen was an independent contractor hired by Noble, not a Noble employee. See Bremer Decl. Ex. 12 at NNI 139171 [Docket No. 125] (“Sales Representative [i.e., a corporation that employed Lun-deen] represents and warrants that it is an independent contractor and is not the agent, servant, or employee of Manufacturer [i.e., Noble].”). And although independent contractors may, under some circumstances, be deemed agents of their contracting partners, Spectralytics has not even attempted to argue that Lundeen was an agent of Noble. See Restatement (Third) of Agency § 1.01 cmt. c (2006) (“[T]he common term ‘independent contractor’ is equivocal in meaning and confusing in usage because some termed independent contractors are agents while others are nonagent service providers.”); Restatement (Second) of Agency § 14N (1958) (“One who contracts to act on behalf of another and subject to the other’s control except with respect to his physical conduct is an agent and also an independent contractor.”). Thus the knowledge of Lundeen as a non-agent independent contractor cannot be imputed to Noble. See Constructores Tecnicos, S. de R.L. v. Sear-Land Service, Inc., 945 F.2d 841, 847 (5th Cir.1991) (holding that a court must find that an agency relationship exists before
Accordingly, to show that Noble had access to Spectralytics’s trade secrets through Lundeen, Spectralyties must show not just that Lundeen learned of the trade secrets, but that he actually communicated them to Noble. Lundeen denied passing any of Spectralytics’s trade secrets to Noble. Niehaus Decl. Ex. HH (“Lundeen Dep.”) at 212 [Docket No. 91]. Spectralyt-ics responds to that testimony not by offering evidence that Lundeen did pass trade secrets to Noble, but instead by offering evidence that Lundeen is untrustworthy. Spectralyties Opp. Noble SJ Mot. at 9-13, 32/14 to 33/15. But even if Lun-deen’s testimony is completely ignored, the record still contains no evidence that Lun-deen communicated Spectralytics’s trade secrets to Noble — an issue on which Spec-tralyties has the burden of proof. As a result, a reasonable jury could not find that Noble gained access to Spectralytics’s trade secrets through Lundeen.
A reasonable jury could, however, find that Noble had access to Spectralytics’s trade secrets through its principals, Larry, Chris, and Scott Noble. The key question is this: Did the Nobles ever visit Spectra-lytics after the development by Spectralyt-ics of the stent-cutting machine whose design Noble allegedly stole? The parties do not dispute that the machine was designed no earlier than December 1995. Spectra-lyties Opp. Noble SJ Mot. at 31/13 n. 23, 34/16; Noble SJ Mem. at 27. Therefore, if the Nobles’ last visit to Spectralyties took place before December 1995, Noble necessarily lacked access to the allegedly stolen trade secrets.
There is only one piece of direct evidence that the Nobles visited Spectralyties after December 1995: Oberg testified that Larry and Scott Noble visited Spectralyt-ies twice, once in 1995 and once in 1996. Oberg Dep. at 80 (“There was two dates they visited. One was like in '95 and one in '96.”). There is also documentary evidence that the Nobles visited Minneapolis — but not necessarily Spectralyties— in December 1995. Bremer Decl. Ex. 18 at NNI — 138534-39. And there is documentary evidence that unidentified Noble employees visited Minneapolis — though again, not necessarily Spectralyties — in February 1996. Id. at NNI — 138540-44.
Noble asks the Court to disregard Oberg’s testimony about a 1996 visit by the Nobles to Spectralyties because, according to Noble, Oberg recanted the testimony. Noble says that Oberg testified from memory, without consulting documents, and “when confronted with his calendar, Oberg confirmed there were only two visits, and confirmed that his calendar entries [for] those visits were in June and August 1995.” Noble Reply Mem. at 4 [Docket No. 136].
That is not quite what Oberg said. Oberg did confirm in his deposition, based on a review of his calendar, that one of the Nobles’ visits took place on August 24, 1995. Oberg Dep. at 712-13. But Oberg did not confirm that the August 24 visit was the second of the Nobles’ two visits. After Noble’s lawyer showed Oberg a page from his calendar dated June 30, 1995, the lawyer and Oberg had this exchange:
Q: Does this refresh your recollection now that Jack Lundeen and Larry Noble stopped by Spectralyties on June 30 around noon?
A: That’s what the document indicates. I don’t recall the nature of that visit.
Q: But that could be the first visit by Larry Noble, and then the August 1995 visit being the second visit, accounting for the two visits that you recall the Nobles making to Spectralyties, correct?
A: That’s possible.
Q: You don’t recall a third visit, do you?
Oberg Dep. at 714. Oberg admitted that it was possible that both of the Nobles’ visits to Spectralytics took place in 1995. But he did not quite recant his earlier testimony that the Nobles visited Spectralytics in 1996. Had he done so, the Court would grant summary judgment to Noble on the trade-secrets claim. But, as the record stands, the claim must be tried.
In sum, based on Oberg’s deposition testimony and the documentary evidence of visits by Noble employees to the Minneapolis area in 1996, there is a dispute of fact over the date of the Nobles’ visits to Spectralytics. Because Noble’s argument that it lacked access to Speetralytics’s trade secrets rests on the factual premise that the Nobles did not visit Spectralytics after December 1995, the Court denies summary judgment to Noble on Spectra-lyties’s trade-secrets claim.
D. The '653 patent
In Count II of the First Amended Complaint, Spectralytics alleges that Noble and Cordis infringed United States Patent 6,114,653 (the '653 patent). Cordis has counterclaimed for a declaratory judgment that the '653 patent is invalid, unenforceable, and not infringed. Ans. & Counterclaim ¶¶ C-E [Docket No. 31].
Spectralytics proposed a stipulation under which its claims and Cordis’s counterclaims with respect to the '653 patent as it relates to Cordis and Noble’s disclosed, stent-cutting methods (past and current) would be dismissed with prejudice, while claims and counterclaims relating to undisclosed stent-cutting methods (past, current, and future) would be dismissed without prejudice. Goggin Deck Ex. 8 [Docket No. 131]. Cordis objected to the stipulation to the extent that it proposed dismissing any of Cordis’s invalidity and unen-forceability counterclaims with prejudice, since those counterclaims were directed at the '653 patent generally and were not specific to the accused device at issue in this case. Goggin Deck Ex. 9.
Cordis now moves to dismiss Count II with prejudice (or for summary judgment of noninfringement, which is basically the same thing). Cordis SJ Mem. at 37. Cor-dis asserts that its corresponding declaratory-judgment claims should be dismissed without prejudice because there is no longer a case or controversy with respect to the '653 patent. Id. at 38. Spectralytics does not exactly oppose the motion — it acknowledges that it no longer asserts Count II for infringement of the '653 patent — -but asks the Court to dismiss both sides’ existing claims with prejudice and to expressly reserve both sides’ future claims and defenses with respect to the '653 patent. Spectralytics Mem. Opp. Cordis Mot. S.J. at 37 [Docket No. 123]; Goggin Deck Ex. 13.
The Court agrees with Cordis that the Court lacks subject-matter jurisdiction over Cordis’s counterclaims with respect to the '653 patent in light of Spectralytics’s agreement to dismiss Count II. See Benitec Australia, Ltd. v. Nucleonics, Inc., 495 F.3d 1340, 1349 (Fed.Cir.2007) (finding no case or controversy, and thus no subject-matter jurisdiction, with respect to declaratory-judgment counterclaims after plaintiff dropped infringement claims). The Court therefore dismisses Count II with prejudice and dismisses Cordis’s counterclaims related to the '653 patent without prejudice.
ORDER
Based on the foregoing and on all of the files, records, and proceedings herein, IT IS HEREBY ORDERED THAT:
1. The disputed terms in United States Patent No. 5,852,277 are construed as set forth in the body of this opinion.
a. No machine made in 1994 by LPL for RMS is prior art under 35 U.S.C. §§ 102 or 103.
b. The existence of a tailstock-less machine allegedly made in 1994 by LPL for RMS cannot be considered among the secondary considerations related to obviousness.
c. United States Patent No. 5,852,277 is NOT INVALID AS ANTICIPATED by any machine made in 1994 by LPL for RMS.
d. The accused device is not prior art under 35 U.S.C. §§ 102 or 103.
e. United States Patent No. 5,852,277 is NOT INVALID AS ANTICIPATED by the accused device.
3. Plaintiff Spectralyties, Inc.’s Motion for Partial Summary Judgment [Docket No. 93] is DENIED in all other respects.
4. Defendant Norman Noble, Ine.’s Motion for Summary Judgment [Docket No. 88] is GRANTED IN PART as follows:
a. Defendant Norman Noble, Inc. did not have access to Spectralytics’s trade secrets through Jack Lun-deen. In attempting to prove Counts III and IV of the First Amended Complaint at trial, Spec-tralytics will not be permitted to argue that defendant Norman Noble, Inc. misappropriated Spectralyt-ics’s trade secrets through the actions of Jack Lundeen.
5. Defendant Norman Noble, Inc.’s Motion for Summary Judgment [Docket No. 88] is DENIED in all other respects.
6. Defendant Cordis Corporation’s Motion for Summary Judgment [Docket No. 103] is GRANTED IN PART as follows:
a. Count II of the First Amended Complaint [Docket No. 30] is DISMISSED WITH PREJUDICE AND ON THE MERITS.
b. Paragraphs C, D, and E of Cordis’s counterclaim [Docket No. 31] are DISMISSED WITHOUT PREJUDICE for lack of subject-matter jurisdiction.
7.Defendant Cordis Corporation’s Motion for Summary Judgment [Docket No. 103] is DENIED IN ALL OTHER RESPECTS.
. Cordis Corporation is now affiliated with Johnson & Johnson, after a merger in 1996 between Johnson & Johnson Interventional Services ("JJIS”) and the then-independent Cordis Corporation. The Court refers to JJIS as "Cordis,” which reflects the current corporate reality.
. In addition to distributing stents made by Noble, Cordis distributes stents that it manufactures in-house.
. The parties call the allegedly infringing Noble machine the "follower assembly.” The Court will generally refer to it simply as the accused device, machine, or apparatus.
. Claim 1 of the '277 patent is the only claim seriously at issue in this suit. The Court will therefore sometimes use the phrase "the '277 patent” as shorthand for "claim 1 of the '277 patent.”
. Count II of the first amended complaint alleges that Noble infringes United States Patent No. 6,114,653 (the '653 patent), a method patent that is related to the '277 patent. Spectralyties intends to dismiss Count II but has not moved for dismissal because the parties have been unable to agree to a stipulation with respect to the '653 patent. See Goggin Decl. Exs. 8-12 [Docket No. 131]. The Court addresses issues related to Count II at the end of this opinion.
. Cordis and Noble have divided the task of briefing patent-law issues, with Cordis focusing on invalidity and infringement, and Noble addressing whether disputed references are in the prior art. But each party expressly relies on the other's arguments. In discussing their arguments, the Court will generally refer only to the party that briefed a particular issue, even though the arguments may nominally be advanced by Cordis and Noble together. The Court expresses its appreciation to all parties for striving to avoid duplication in the briefing.
.Cordis, in a single paragraph of its summary-judgment brief, contends that Spectra-lytics is barred from showing infringement under the doctrine of equivalents. Cordis SJ Mem. at 36-37. Cordis’s briefing is not adequate to permit the Court to address this issue, and thus the Court declines to address it.
. The prosecution history of the '277 patent is in Exhibit 11 of the Rigby Declaration [Dock-etNo. 113],
. Consider a ball bearing that falls to the bottom of a barrel filled with oil. One would not explain the ball bearing’s ability to "slide through” the oil by saying there was "clearance” between the ball bearing and the oil. To the contrary: One would describe the oil as "touching” the ball bearing’s surface. Cordis's argument is basically that metal tubing passing through a Teflon bushing is like a metal ball bearing falling through a column of oil. See Miller Dep. at 32 ("Teflon is soft.... It has a very slippery surface to it, with the lubricious properties.... ”).
. Not all prior art under § 102 qualifies as prior art for obviousness purposes under § 103. Specifically, certain prior art under subsections (e), (f), and (g) of § 102 is expressly excluded under § 103(c) from the pri- or art for obviousness purposes, provided that the prior art and the invention being challenged were once commonly owned. 35 U.S.C. § 103(c). Further, it is not entirely clear whether prior art under subsections (c) and (d) of § 102 counts as prior art under § 103. See 3 R. Carl Moy, Moy’s Walker on Patents § 9:20 at 9-54 (4th ed.2007). But these distinctions are irrelevant in this case: Whatever qualifies as prior art in this case under subsections (a), (b), (e), or (g) of § 102 also qualifies as prior art under § 103.
. Under § 102(b), an invention is not patentable if "the invention was patented or described in a printed publication in this or a foreign country or in public use or on sale in this country, more than one year prior to the date of the application for patent in the United States....” 35 U.S.C. § 102(b).
. Under § 102(a), an invention is not patentable if "the invention was known or used by others in this country, or patented or described in a printed publication in this or a foreign country, before the invention thereof by the applicant for patent....” 35 U.S.C. § 102(a) (emphasis added).
Under § 102(e), an invention is not patentable if "the invention was described in (1) an application for patent, published under [35 U.S.C. § 122(b)], by another filed in the United States before the invention by the applicant for patent or (2) a patent granted on an application for patent by another filed in the United States before the invention by the applicant for patent....” 35 U.S.C. § 102(e) (emphasis added).
Under § 102(g)(2), an invention is not patentable if "before such person’s [i.e., the applicant’s] invention thereof, the invention was made in this country by another inventor who had not abandoned, suppressed, or concealed it.” 35 U.S.C. § 102(g)(2) (emphasis added).
. This statement is something of an oversimplification, but it suffices for purposes of this opinion.
. Cases involving invalidity under § 102(b), like PowerOasis, and cases involving invalidity under §§ 102(a), (e), and (g), like this one, differ at the level of the so-called prima facie case. Because invalidating prior art under §§ 102(a), (e), and (g) must predate the paten-tee's invention date, one could argue that making a "prima facie case” of invalidity under these sections entails proving that the prior art predates the invention date. By contrast, a "prima facie case” under § 102(b) can be made without any evidence about the invention date.
To the extent that it makes any sense to talk about a "prima facie case” of patent infringement, however, it would make more sense to treat the patentee's default invention date— the patent-application date — as the invention date for purposes of a “prima facie case” of invalidity under §§ 102(a), (e), or (g). That is, once a challenger establishes that a piece of invalidating prior art predates the patent-application date and otherwise qualifies as prior art under §§ 102(a), (e), or (g), that should suffice for the patentee’s "prima facie case.” The burden should then shift to the patentee to establish an earlier invention date, just as in PowerOasis the burden was on the patentee to establish its entitlement to an earlier priority date.
. The Federal Circuit put it this way in Mahurkar:
With all of the evidence from both sides before the jury, Bard [the accused infringer] must persuade the jury by clear and convincing evidence that its version of the facts is true. In other words, Bard must persuade the jury that Dr. Mahurkar did not invent prior to publication of the catalog. This is because (1) he did not conceive and reduce his invention to practice before the publication date and (2) he did not conceive and thereafter proceed with reasonable diligence as required to his filing date. If Bard fails to meet this burden, the catalog is not prior art under section 102(a).
. The Court sets aside for the moment what a jury must decide when an inventor argues for an earlier invention date. As noted above, the Federal Circuit requires the inventor to meet only a burden of production, while the defendant must to prove a negative proposition (that the invention date does not precede the date of a prior-art reference) by clear and convincing evidence.
. Indeed, this Court doubts whether a jury could be instructed, in a comprehensible way, to assess whether a prior-art reference was sufficiently corroborated under a rule of reason. The model patent jury instructions from the Federal Circuit Bar Association, the American Intellectual Property Lawyers Association ("AIPLA”), and the Northern District of California do not include a model instruction on corroboration. See Fed. Cir. BarAss’n Model Patent Jury Instrs. (Jan.2008); AIPLA Model Patent Jury Instrs. (March 2008), available at http://www.aipla.org (search for "patent jury instructions”); Model Patent Jury Instrs. for the N.D. Cal. (Sept. 20, 2004), available at http://www.innsofcourt.org/Content/ InnContent.aspx?Id=893.
. Interference cases featuring the "rule of reason” include: Medichem, 437 F.3d at 1170-71; Cooper v. Goldfarb, 154 F.3d 1321, 1330 (Fed.Cir.1998); Holmwood v. Sugavanam, 948 F.2d 1236, 1238-39 (Fed.Cir.1991); Coleman v. Dines, 754 F.2d 353, 360 (Fed.Cir.1985); Reese v. Hurst, 661 F.2d 1222, 1225 (C.C.P.A.1981); Berges v. Gottstein, 618 F.2d 771, 774 & n. 5 (C.C.P.A.1980); Mikus v. Wachtel, 542 F.2d 1157, 1159 (C.C.P.A.1976); Linkow v. Linkow, 517 F.2d 1370, 1373 (C.C.P.A.1975); Anderson v. Pieper, 58 C.C.P.A. 1221, 442 F.2d 982, 985 (1971); Berry v. Webb, 56 C.C.P.A. 1272, 412 F.2d 261, 266-67 (1969).
Infringement cases featuring the "rule of reason” include: Adenta, 501 F.3d at 1372; Checkpoint Sys., 412 F.3d at 1337; Sandt Tech., Ltd. v. Resco Metal & Plastics Corp., 264 F.3d 1344, 1350-51 (Fed.Cir.2001); Loral Fairchild, 266 F.3d at 1363; Finnigan Corp. v. Int'l Trade Comm’n, 180 F.3d 1354, 1369 n. 11 (Fed.Cir.1999); Woodland Trust v. Flower-tree Nursery, Inc., 148 F.3d 1368, 1371 (Fed. Cir.1998); Ethicon, Inc. v. U.S. Surgical Corp., 135 F.3d 1456, 1461 (Fed.Cir.1998); Mahurkar, 79 F.3d at 1577.
Judge Newman, concurring in Loral Fair-child, criticized the court's importation of the corroboration requirement from interference cases to an infringement case in which the question was whether an invention was made before the date of a prior-art reference. 266 F.3d at 1366 (Newman, J., concurring).
. The court’s contradictory statements are packed closely together. The relevant passage reads in full:
[Tjhis case does not present the question of the necessity of corroboration — there was both testimonial and documentary corroborating evidence here. Rather, this case questions the sufficiency of the corroborating evidence. Assessing the sufficiency of evidence which corroborates a witness's testimony concerning invalidating activities has been analyzed under the "rule of reason” test, and it is a jury question. A "rule of reason” analysis involves an assessment of the totality of the circumstances including an evaluation of all pertinent evidence. OrthoArm [the patentee] attempts to discredit each piece of evidence, one by one, to show that clear and convincing evidence invalidating the patent was lacking. However, the jury considered all the evidence. We cannot say that the court erred in concluding that there was sufficient evidence corroborating Heiser's and Schendel's testimony to enable the jury to find that the Time bracket [i.e., the invalidating prior art] was publicly used and/or on sale at the 1994 Florida trade show.
501 F.3d at 1371-72 (citations omitted).
. The three disputed patents are: (1) U.S. Patent No. 5,744,778 to Kash, applied for on April 2, 1996, Rigby Decl. Ex. 9; U.S. Patent No. 5,765,455 to Muhlniekel, applied for on May 1, 1996, Merrill Decl. Ex. 12; and Japanese patent No. 8-197595 to Sato, issued July 23, 1996, Rigby Decl. Ex. 8. The Court, like the parties, refers to them as “Kash,” "Muhlniekel,” and "Sato,” respectively. The effective dates of Kash and Muhlniekel are the patent-application dates. The effective date of Sato, because it is a foreign patent, is the date it issued.
Spectralyties moved for summary judgment that Kash and Sato are not prior art; Cordis moved for summary judgment that Kash and Muhlniekel are prior art. As noted in the text, however, Cordis has since conceded that genuine issues of fact exist that preclude summary judgment in its favor. Therefore, only Kash and Sato (and not Muhlniekel) are still at issue. As a practical matter, though, a decision about Kash may implicitly resolve the dispute over Muhlniekel, as Muhlnickel's effective date is later than Kash’s.
. The page numbering in Spectralytics's memorandum opposing Noble's summary-judgment motion runs from 1 through 18 and then (on actual page 19) starts over at 1 again. The Court's citation in the text to page 38/20 is a citation to actual page 38, which bears the number 20.
. Spectralytics characterizes Allen as an “independent witness.” Spectralytics Opp. Noble SJ Mot. at 40/22. This characterization is debatable given that Allen was a Spectralytics employee in early 1996, when he claimed to have seen the invention working. He now works elsewhere. See Allen Decl. ¶ 2.
. If this were a normal case, on the record before the Court, the existence of a tailstockless 1994 LPL/RMS machine would be a question for the jury.
. Noble also asserts that "by 1996 LPL, RMS and ComTal were selling Swiss-style machines to competitors of JJIS.” Noble SJ Opp. at 22. Sales made in 1996 are obviously not relevant to whether the LPL/RMS machine was kept secret in 1994.
Similarly irrelevant is Noble's assertion that "RMS commercialized its stent cutting machine and used it to make stents for the benefit of the public by 1994...." Id. at 24. Publicly selling the output of a secret machine does not make the machine itself public.
. Noble also seems to argue that because the allegedly stolen trade secrets became public when the '277 patent was published in 1998, the statute of limitations must have run because any theft ended in 1998. Noble SJ Mem. at 20-21. This argument, if indeed Noble is making it (the Court cannot be sure), hardly merits comment. If Noble stole trade secrets in 1996, the fact that those secrets became public in 1998 does not mean that Noble is immune from liability for its theft in 1996' — and, as noted, the statute of limitations on claims arising out of that 1996 theft began to run when Spectralytics discovered or should have discovered it. The fact that the trade secrets became public in 1998 is irrelevant to that inquiry.