Slater Steels Corp. v. United StatesSlater Steels Corp. v. United States
Opinion
I. Introduction
This is a consolidated case.
1
Plaintiffs and Defendants-Intervenor Slater Steels Corporation, Carpenter Technology Corporation, Electralloy Corporation, and Cruei-
II. BaCkground
In February 2001, the Viraj Group petitioned Commerce to conduct an administrative review of the antidumping duty order on certain stainless steel bar (“SSB”) from India for the period of review of February 1, 2000 through January 31, 2001 (“POR”).
3
In March 2001, Commerce initiated the review.
See Initiation of Antidumping and Countervailing Duty Administrative Reviews and Requests for Revocations in Part,
66 Fed.Reg. 16,037 (Mar. 22, 2001). On March 7, 2002, Commerce published the preliminary results of the administrative review.
See Stainless Steel Bar from India; Preliminary Results of Antidumping Duty Administrative Review and Partial Rescission of Administrative Review,
67 Fed.Reg. 10,377 (Mar. 7, 2002)
{“Preliminary Results”).
The dumping margin for the Viraj Group was prehminarily determined to be 0.10 percent.
Id.
at 10,380. On July 5, 2002, Commerce issued the final results of the administrative review, which were published in the
Federal Register
on July 11, 2002.
See Final Results
at 45,958. The
The Viraj Group consists of Viraj Alloys, Ltd. (“VAL”), Viraj Forgings, Ltd. (“VFL”), Viraj Impoexpo, Ltd. (“VIL”), and Viraj USA, Inc. (“Viraj USA”). 6 In the Preliminary Results, Commerce found that the Viraj Group companies had common ownership, shared directors, and intertwined operations—each a factor in the decision to collapse. Preliminary Results at 10,378. In particular, Commerce determined that the following production relationships exist between the companies: VAL produces “black bar” (hot-rolled round bar) and billets for sale in the Indian home market. Apart from direct sale in the market, VAL supplies VIL with the black bar which VIL further processes into “bright bar” (cold-finished bar) for sale in the United States. In addition to bright bar, VIL produces stainless steel billets, flanges, forgings and wires. VAL also supplies VFL with billets which VFL processes into stainless steel forged flanges. Basing its determination on these findings and retracing the language of 19 C.F.R. § 351.401(f), Commerce concluded in the Preliminary Results that no “substantial retooling would be required for VAL, VIL, or VFL to restructure their manufacturing priorities” and that these companies should therefore be collapsed and treated as one entity. Id.
In the Final Results, Commerce added that the Viraj Group companies also leased equipment or facilities from one another. In particular, Commerce announced:
VAL and VIL can produce subject merchandise (ie., similar or identical products) and can continue to do so, independently or under existing leasing agreements, without substantial retooling of their production facilities. Furthermore, the three Viraj Group companies share the same two directors who have significant ownership of each company. The two directors oversee all aspects of production, pricing and sales. See Viraj Section A Questionnaire Response (June 29, 2001) at A-6 to A-8. Therefore, we find a significant potential for the manipulation of price and production among VIL, VAL and VFL. For these reasons, we find that VIL, VAL and VFL meet the regulations’ collapsing requirements.
Decision Memorandum at 3 (emphasis added). The record further contains the Viraj Group’s information that “VIL pays plant and machinery hire charges to VAL for VAL’s production facilities.” Stainless Steel Bar from India; Rebuttal Brief—Viraj at 2 (Apr. 15, 2002) (‘Viraj Admin. Br.”) in Def.’s App. 1. “In other words, VIL is producing the bright bars sold to the [United States] using VAL-owned machinery, machinery that VAL itself can use to make the bright bars made by VIL.” Id.
As a response to the challenge that it had ignored its precedent on collapsing,
III. Discussion
A. Parties’ arguments.
“Collapsing” involves treating a group of affiliated producers as a single entity for the calculation of dumping margins. In this review, Commerce used the collapsed entity’s cost of production to value steel billet, the primary input in the manufacturing of SSBs. The domestic industry argues that instead of collapsing, Commerce should have used the “major input rule.” 7 See Mem. in Supp. of Pls.’ Mot. for J. upon an Agency R. (‘Pls.’ Br.”) at 5. Under the major input rule, Commerce values a major input at the highest of the transfer price between affiliated entities, the input’s market price or its cost of production by the entity that produces the input. See 19 C.F.R. § 351.407(b); 19 U.S.C. § 1677b(f)(3). The domestic industry charges that collapsing understates the dumping margin of the Viraj Group companies.
Under the regulations, Commerce will collapse or “treat two or more affiliated producers as a single entity where those producers have production facilities for similar or identical products that would not require substantial retooling of
either
facility in order to restructure manufacturing priorities” and where “there is a significant potential for the manipulation of price or production.”
8
19 C.F.R.
Commerce responds that it properly collapsed the Viraj Group companies because there “is nothing in the regulation that prohibits Commerce from considering a company’s use of leased facilities as part of the company’s production facilities.” Def.’s Mem. in Opp. to Pls.’ Mot. for J. upon an Agency R. (‘Def.’s Br.”) at 10. Commerce maintains that “[p]ursuant to the domestic industry’s analysis, affiliated companies that utilize production facilities not owned by the producer could never be collapsed because they lack components of the production process and, accordingly, would require substantial retooling to restructure manufacturing priorities and produce the subject merchandise.” Id. at 12-13. Accordingly, Commerce argues, “all production facilities used in production of the subject merchandise must be considered in its collapsing analysis.” Id. at 13. Since it has been determined that there is “broad overlap of production capability” between the Viraj Group companies, treated separately “the Viraj Group easily could shift production and sell the subject merchandise through the company with the smallest margin.” Id. (quoting Decision Memorandum at 3).
The domestic industry counters that under 19 C.F.R. § 351.401(f)(1) collapsing determinations should “focus on the actual production capabilities of the parties involved, and thus [Commerce] cannot impute to those parties any production capabilities made available through a leasing arrangement, a tolling operation, or subcontracting operation.” Pls. ’ Reply Br. at 3. Otherwise, the domestic industry argues, there would have been no need to include a “substantial retooling” requirement in the regulation as Commerce could always assume that a party could lease the necessary production equipment or facility. The domestic industry articulates that VIL’s need to lease equipment from VAL is “per se evidence” that VIL (or VAL) is not capable on its own to produce the subject merchandise. Id. The domestic industry further remarks that Commerce’s assumption that because VIL leased VAL’s equipment the two companies “shared” the same equipment is erroneous. On the contrary, the domestic industry asserts, the companies’ financial statements show that the equipment was not shared. See id. at 5-6.
B. Analysis.
The regulation governing collapsing sets out a three-part test by which Commerce must determine that (1) the companies are affiliated pursuant to 19 U.S.C. § 1677(33), (2) the companies are capable of producing similar or identical products without substantial retooling of each producer’s facility, and (3) there is significant potential for the manipulation of price or production. See 19 C.F.R. § 351.401(f). Only the second part of this test is implicated here.
The policy rationale behind collapsing is to prevent affiliated exporters with same or similar production capabilities to channel production of subject merchandise through the affiliate with the lowest potential dumping margin and thereby circumvent the United States antidumping law. The regulation mandates Commerce to determine whether affiliated producers that are investigated have “production facilities for similar or identical products” such that they are capable of rearranging their production priorities within the group without “substantial retooling” of their facilities.
Id.
Here, the record shows that VAL produces a semi-finished or intermediate product, steel billet, that is used as an input in the manufacturing of SSBs, the subject merchandise. VAL has the melting and rolling capabilities to produce steel billets, but does not have the finishing capability to produce the subject merchandise. On the other hand, VIL cannot produce billets, but has annealing and pickling capabilities to further process billets into SSBs. “Substantial retooling,” including adding induction and refining furnaces, argon oxygen decarburiser converters, casting machines, and rolling mills, is needed
Moreover, by collapsing the Viraj Group companies Commerce may have underestimated their cost of production and consequently the group’s dumping margin.
11
Collapsing does not allow transactions between affiliates to be scrutinized as there is no “transactions disregarded” component to the regulation pertaining to collapsing and the companies are treated as a single entity. In the POR, instead of purchasing steel billet from a third party (or from VAL), VIL entered into a lease agreement to use VAL’s production facilities. The lease agreement is not part of the administrative record. The conditions and terms of the lease agreement (as well as other transactions among the Viraj affiliates) are, however, material to ascertain whether such arrangements constitute arm’s-length transactions. Were the cost of steel billet artificially low when compared to its true market value, the collapsed entity’s dumping margin would be unduly low. This is the type of situation which the “major input rule” attempts to rectify.
See
19 C.F.R. § 351.407(b) (sanctioning the use of the higher of the affiliated transaction price, the market price or the cost of production of the input in dumping duty calculations);
cf. Viraj Group, Ltd. v. United States,
The court is mindful of its mandate to “sustain ‘any determination, finding or conclusion found’ by Commerce unless it is ‘unsupported by substantial evidence on the record, or otherwise not in accordance with law.’ ”
Fujitsu General Ltd. v. United States,
Moreover, the court finds that Commerce’s decision to collapse the Viraj Group companies is unsupported by substantial evidence and that Commerce’s explanations for its reasons are inadequate. In the
Final Results,
Commerce merely observed that “VAL and VIL can produce subject merchandise
(i.e.,
similar or identical products) and can continue to do so, independently or under existing leasing agreements, without substantial retooling of their production facilities.”
Decision Memorandum
at 3. On the question of production capabilities, the record contains schemata provided by the Viraj Group (and submitted to Commerce) which clearly show that VIL and VAL lack capability to produce similar or identical products.
See Viraj Questionnaire Response
at 62-64 in
Pls. ’ App.
5. On the other hand, the record also contains the information provided by the Viraj Group that “VIL is producing the bright bars sold to the [United States] using VAL-owned machinery, machinery that VAL itself can use to make the bright bars made by VIL.”
Viraj Admin. Br.
at 2 in
Def.’s App.
1. That is, the Viraj Group declared that VAL and VIL both could produce subject merchandise. There is no indication in the record, however, that VAL was leasing or otherwise using VIL’s or any other company’s finishing equipment and facilities. The Vi-raj Group’s statement is thus not substantiated by the record and further conflicts with diagrams (submitted by the Viraj Group itself) which objectively display the companies’ respective production lines.
Cf. Carlisle Tire & Rubber Co. v. United States,
IV. Conclusion
For all the foregoing reasons, the domestic industry’s USCIT R. 56.2 Motion for Judgment upon an Agency Record is granted, and since the court sees no support on this record for the decision to collapse the Viraj Group companies, the case is remanded to Commerce to reconsider its analysis of the collapsing issue and, if necessary, to revise its dumping margin calculations in accordance with this opinion.
Notes
. Slater Steels Corporation et at. were Plaintiffs in one case and Defendants-Intervenor in another case before this Court that have since been consolidated. See Order signed by Court on November 14, 2002. The Viraj Group, Plaintiff in one case, consented to the consolidation of the cases and filed no papers in opposition to this motion of the domestic industry.
. “Collapsing” involves treating a group of affiliated producers as a single entity for the calculation of dumping margins. Under the regulations, Commerce will collapse or "treat two or more affiliated producers as a single entity where those producers have production facilities for similar or identical products that would not require substantial retooling of either facility in order to restructure manufacturing priorities” and where "there is a significant potential for the manipulation of price or production.” 19 C.F.R. § 351.401(f)(1). The term "affiliated” is defined in 19 U.S.C. § 1677(33) (2000).
. Notice of the antidumping duty order was published in the Federal Register on February 21, 1995. See 60 Fed.Reg. 9661. The subject merchandise SSB is "stainless steel in straight lengths that have been either hot-rolled, forged, turned, cold-drawn, cold-rolled or otherwise cold-finished, or ground, having a uniform solid cross section along their whole length” in various geometric shapes. Final Results at 45,957. The subject merchandise does not include stainless steel semi-finished products, cut length flat-rolled products, wire, and angles, shapes and sections. Id. The statute defines “subject merchandise” as merchandise subject to an antidumping investigation, review or order. 19 U.S.C. § 1677(25).
. Commerce amended the Final Results on August 15, 2002 to correct ministerial errors. See Notice of Amended Final Results of Anti-dumping Duty Administrative Review: Stainless Steel Bar from India, 67 Fed.Reg. 53,336 (Aug. 15, 2002). The dumping margin of the Viraj Group remained the same. Id. at 53,-337.
. “[A] weighted average dumping margin is de minimis if [Commerce] determines that it is less than 2 percent ad valorem or the equivalent specific rate for the subject merchandise.” 19 U.S.C. § 1673b(b)(3) (2000).
.At issue here is the collapsing of VAL, VFL, and VIL. Viraj USA is a company incorporated in the United States and is a 100% subsidiary of VFL. See Viraj Questionnaire Response at A-6 to A-7 (June 29, 2001) in App. to Def.’s Mem. in Opp. to Pls.' Mot. for J. upon an Agency R. (“Def.’s App.") 3.
. Both collapsing and the major input rule involve affiliated producers. The determination of affiliation is. made pursuant to 19 U.S.C. § 1677(33) and requires a degree of common control. There is no dispute here as to the affiliated status of the Viraj Group companies.
. To determine whether there is a significant potential for the manipulation of price or production, Commerce considers common ownership, shared directors or managers, and intertwined operations as factors. 19 C.F.R. § 351.401(f)(2). Since the court decides in its final analysis that based on the record here the Viraj Group companies do not have "production facilities for similar or
. Because the court finds, based on the record and as a matter of law, that Commerce erred in the
Final Results
by collapsing the Viraj Group companies, the court need not reach the domestic industry’s assertion that Commerce’s decision to collapse the Viraj Group in this review is inconsistent with its prior administrative reviews. In any event, the domestic industry’s arguments on this issue fall short because the record in this review shows that the relationship among the Viraj Group companies has changed since the former review of the antidumping duty order on stainless steel wire rod ("SSWR review”), which the domestic industry highlights.
See Stainless Steel Wire Rod from India; Final Results of Antidumping Duty Administrative Review,
65 Fed.Reg. 31,302 (May 17, 2000), sustained by
Viraj Group, Ltd. v. United States,
25 CIT, -,
. The court notes that Commerce claims that "VIL and VFL sold the subject bar in the U.S. market during the FOR,” citing the Viraj Group’s administrative brief at page 2. Def.’s Br. at 14. There, however, the Viraj Group merely reiterated Commerce’s finding in the SSWR review that "VIL/VFL sold hot rolled annealed and pickled wire rods." Viraj Admin. Br. at 2 in Def.’s App. 1 (emphasis added).
. “The term 'dumping margin’ means the amount by which the normal value [or home market value] exceeds the [U.S. price] of the subject merchandise.” 19 U.S.C. § 1677(35)(A); § 1677a(a). In the event the normal value is not available, such as when the company does not sell the product in its home market, normal value may be "constructed” using cost of manufacture, selling general and administrative expenses, and profit. § 1677b(e); 19 C.F.R. § 351.405(a). Therefore, the lower the cost of production for steel billets, the lower is the Viraj Group’s dumping margin.
. Consistent with this information, the domestic industry argues that the lease agreement between VIL and VAL constitutes a capital lease, which in accounting terms is equivalent to an "acquisition” of the assets. See United States Financial Accounting Standards Board, Statement No.13 ("Accounting for Leases”), available at http:// www.fasb.org/pdi/fasl3.pdf; see also International Accounting Standard ("IAS”) 17 ("Leases”) (summary), available at http:// www.iasc.org.uk. The lease document is, however, not available to confirm the type of the lease.