122 Ark. 552 | Ark. | 1916
Sheldon Handle is the name of a partnership composed of Mason -Sheldon, M. O. Sheldon and Z. L. Sheldon, who are operating a wooden handle factory at Malvern, Arkansas. The factory was constructed in the autumn of 1913, and was actually put into operation in January or February, 1914. The plaintiff, Claude Williams, began working for the defendants at the factory before the actual operation was begun. In other words, he was employed in November, 1913, to do general work about the plant, and when the operations began he was put to work at -a lathe and continued to work there until he received the injury, on August 31, 1914, for which he seeks to recover compensation in this case. While he was at work at his lathe early in the forenoon of that day, a belt came loose from above him and fell down and struck his elbow and threw his hand into the knives of the machine, and serious injury to the limb resulted.
> The cause of the giving way of the belt was that the lacing broke. There was no defect in the belt itself, and the plaintiff testified that he noticed when he went to . work that morning that the lacing seemed to be in good condition. It was a seven inch (belt, and, according to tbe testimony of one of the witnesses, carried ten or fifteen horse-power. The mill had been shut down nine days — fr.om Saturday, August 22, to Monday, August 31, the day plaintiff was injured. It was a part of plaintiff’s duty to see that the things about his machine, including the belt, were in proper order. Two or three days before the mill was shut down, plaintiff put new lacing in the belt. It is not explained in the testimony, so far as we have observed, whether the lacing broke or came loose or merely was thought to be worn out; but, at any rate, plaintiff undertook to lace it, as was his duty. Lace leather was kept in the plant to use in lacing the belt. A side of lace leather had been purchased by Mr. Sheldon, the manager, when the mill began operation and was kept in a certain cupboard or locker. At this time the side of leather had been used down to a strip about six inches wide and about three feet long, which included the thin or flanky part of the side. "When the plaintiff got ready to lace the belt he went to the locker and got the piece of leather, but after looking at if decided that he would rather cut the lacing from a new side of leafier which Mr. Sheldon had recently procured, but which if does not appear had been put in use. He talked with one of the men, Mr. Burch, who was also a witness in the case, and decided that he would rather cut strips from the new side of leather because he could get longer strips, and also because he thought that the thicker part of the hide would be better. He went off to find Mr. .Sheldon, but the' latter was away from the plant at that moment and the office was locked, so without seeking further, the plaintiff went hack and got the old piece of lace leather, and, with the help of Burch and another employee named Hicks, proceeded to cut the strips and lace the belt. The testimony shows that he cut the strips the full width allowed by the holes in the belt and that the lacing was properly performed.
The plaintiff and the other witnesses testified that the leather appeared to be and was in good condition, except that it was the thin and flanky part of the hide which was not so strong as the thicker part of the hide. There is some conflict m the testimony as to what is the best part of a side of lace leather, and there seems to be a difference of opinion as to the relative strength of the different parts, but it is undisputed that all parts of the •hide are used, according to the size of the belt to be laced —that the larger the belt the stronger the lacing required, which is obviously true. Many of the witnesses say that the thin side of the 'hide is strong enough for anything below a seven or eight inch belt, and other witnesses say it is strong enough for any size belt.
(1) One of the contentions of counsel for defendant is that the plaintiff assumed the risk of the danger from using that particular piece of leather for lacing the belt, and we are of the opinion that the contention is sound and that the plaintiff has not made out a case for the recovery of damages. This is not a case of furnishing defective, rotten or worn-out material. It is uncontradicted that the side of leather purchased by* the defendants and placed there for use was of the best material obtainable, and the only contention with respect to its unfitness for use is that it had been used down to the thin or flanky part of the hide, which it was claimed was not strong enough to be used in lacing a belt of that size. Now, it was a part of the plaintiff’s duty to lace the belt, and it necessarily followed that he was to determine whether the material placed there was fit for that particular use. It would be different if the material purchased had been defective in any other way so that the master might have discovered its unfitness by reasonable inspection, but such is not the case here, for the material was as before stated, fit for use, and the only question was whether the unused part was fit for the particular use that plaintiff wanted to put it to. If he discovered that if had been used down to the place where it was unfit for use in lacing a belt of that size, then he could not use it without assuming the risk of the danger. It was obvious from his own. testimony that he did fully appreciate the fact 'that it was not altogether suited for that purpose, but he decided to go ahead and use it without waiting for the return of the superintendent so that he could get the new side of leather. He did proceed to use it of his own volition, and the belt remained in that condition throughout the period of nine days during which the mill was idle.
(2) The case falls, we think, within the principle announced by decisions of this and other courts to the effect that where the duty is delegated to the servant himself of making his own working place and appliances safe, or to determine the sufficiency of the appliances or material which he has to use, then he assumes the risk of any danger arising from the use of such working place, appliances or material. Southern Anthracite Coal Co. v. Bowen, 93 Ark. 140; Fordyce Lumber Co. v. Lynn, 108 Ark. 377; 4 Thompson on Negligence, section 4003.
The case of Eligh v. Goldie, 143 Mich. 596, 107 N. W. 316, which is cited on the brief of counsel for defendant, is quite’ similar to the facts of the present case. There the employee, whose duty it was to repair a belt, went to the foreman to get lace leather which he preferred to use rather than rivets, but upon the suggestion of the foreman he went back and used the rivets and an injury resulted from the breaking of the belt. The court held that the servant assumed the risk, and in disposing of that branch of the case said: “There is nothing in his testimony that indicates a lack of knowledge with reference to the manner in which the belt was fastened, nor that any representations were made to him to lead him to suppose that the belt would be fastened in any other way than it was. As to this feature of the case he must be deemed to have assumed the risk.”
To sum up the situation presented in this case, it is seen that there was no negligence on the part of the master in failing to exercise care to discover defects nor in furnishing material that was wholly unfit for use; but, on the contrary, the material which finally proved unfit for this particular use was in fact good material for other uses about the plant, aPd the choice of using it for this particular work was left entirely to the plaintiff. We think, therefore, that it presents a clear case of assump-' tion of risk and that plaintiff has no right to recover. That being true, it is unnecessary to notice other assignments of error, and, the case having been fully developed, no useful purpose would be served in remanding it for a new trial.
The judgment is therefore reversed and the cause dismissed.