68 Cust. Ct. 83 | Cust. Ct. | 1972
The issue in this case is whether articles, imported from Austria and described on the invoice as non-magnetic semi-finished austenitic stainless survey drill collars without threading and without welded steel subs, were properly classified by customs as tubes of steel under TSUS item 610.52 or should be classified, as plaintiff contends, as parts of boring and extracting machinery for earth, minerals, or ores under TSUS item 664.05, or alternatively as parts of electrical measuring or checking instruments and apparatus under TSUS item 712.49.
Customs assessed the articles at the regular rate of 14 per centum ad valorem, and cumulative rates of 1.35 cents per pound on the chromium content (TSUS item 607.01) and 31.5 cents per pound on the molybdenum content (TSUS item 607.02).
Schedule 6, part 2, provides for the classification of articles under TSUS item 610.52, in pertinent context, as follows:
Part 2 headnotes:2
1. This part covers precious metals and base metals * * *, their alloys, and their so-called basic shapes and forms, and, in addition, covers metal waste and scrap. * * * This part does not include—
*5? S¡» V V i]*
(iv) other articles specially provided for elsewhere in the tariff schedules, or parts of articles.
ij:***
Subpart B. - Iron ok Steel
Subpart B headnotes:
1. This subpart covers iron and steel, their alloys, and their so-called basic shapes and forms, and in addition covers iron or steel waste and scrap.
* % * ❖ * * #
4. Additional duties: Iron or steel products which contain, by weight, * * * over 0.2 percent of chromium or over 0.1 percent of molybdenum * * * are subject to additional cumulative duties as provided for hi items 607.01, 607.02 * * *, but these duties apply only with respect to products covered by provisions which make specific reference to this headnote in the “Bates of Duty” columns.
* * * * * * He
Pipes and tubes and blanks therefor, all the foregoing of iron (except cast iron) or steel:
*******
*85 610.52 Other _ 14% acl _ yal. + additional duties (see lieadnote 4)
Plaintiff’s protest claim is that the articles are drill collars dutiable at either 9 per centum ad valorem under TSUS item 664.05 as parts of boring and extracting machinery for earth, minerals, or ores, or, at 11.5 per centum ad valorem under TSUS item 712.49 as parts of electrical measuring or checking instruments and apparatus.
Schedule 6, part 4, subpart B, provides for the classification of articles under item 664.05, and schedule 7, part 2, subpart D, provides for the classification of articles under item 712.49, in pertinent context, as follows:
Part 4 headnotes: [Schedule 6]
1. This part does not cover—
(i) bobbins, spools, cops, tubes, and similar holders;
******
(v) articles and parts of articles specifically provided for elsewhere in the schedules.
[Subpart B]
664.05 Mechanical shovels, coal-cutters, excavators, scrapers, bulldozers, and other excavating, levelling, boring, and extracting machinery, all the foregoing, whether stationary or mobile, for earth, minerals, or ores; pile drivers; snow plows, not self-propelled; all the foregoing and parts thereof_ 9 % ad val.
[Schedule 7, part 2, subpart D]
Electrical measuring, checking, 'analyzing, or automatically-controlling instruments and apparatus, and parts thereof:
]; * * * *
712.49 Other_ 11.5% ad val.
At the trial in Los Angeles, two witnesses, both associated with The Servco Company, plaintiff herein, testified. Defendant adduced the testimony of a witness employed in the tubular products division of Babcock & Wilcox Company, manufacturers of seamless and welded pressure tubing and mechanical tubing. A cross section sliced from one of the imported articles illustrates the thickness and cylindrical shape of the imported articles (exhibit 3). Photographs of the imported
The official papers indicate that the imported articles were imported in 30-foot lengths. Exhibit 3, the cross section piece, reveals that the metal material of which the imported articles are formed has a finished shine; that the articles measure 8 inches in diameter; that the longitudinally bored hole in the article measures slightly less than 3 inches in diameter. The cylindrical wall of the tube is about 2y2 inches thick.
Plaintiff’s witnesses, in sum, testified that the imported articles are so-called drill collars; that drill collars are cylindrical, rigid, heavy pieces solely used to apply weight to the drilling bit of boring machinery used to bore holes in the earth; that after importation, the imported articles are processed for that use by welding an alloy steel “sub” to one end of the article, or by cutting threads in one end; that they knew of no other use for the imported articles than to be processed to the condition of finished drill collars; that the drill collar is attached immediately above the drilling bit; that the drilling machinery with which a drill collar is used consists of a derrick, a hoist, surface equipment which includes a rotating mechanism, a “Kelly”, a rotary table, the drill collar, the sub-surface bit;
A witness for plaintiff also testified that drill collars may be magnetic or non-magnetic; that as a drilling member magnetic and nonmagnetic drill collars are used in the same way, but in surveying a directional bore hole a non-magnetic drill collar is necessary because a magnetic drill collar prevents getting a directional survey whereas a non-magnetic drill collar will not influence a clinograph which is a surveying instrument used to ascertain deviations from the vertical in a bore hole;
Defendant’s witness, well qualified in the pipe and tube industry of the United States, testified extensively but exclusively concerning his knowledge of pipes and tubes. He examined exhibits 1, 2 and 3 and stated that, in the steel tubing industry in the United States, the articles illustrated by the exhibits would be known as seamless mechanical tubing, or hollow bar. On cross-examination, defendant’s witness testified that his opinion (i.e., whether a particular article was a pipe or tube) was based on the configuration of an article and that he was not familiar with the term “drill collar”.
Both sides have filed briefs. Plaintiff, having primarily briefed the claim under TSUS item 664.05, inter alia argues that item 712.49 is more specific than item 664.05, and that “it appears that the drill collars are more properly classifiable under Item 712.49” as parts of electrical measuring apparatus, than as parts of boring machinery under item 664.05. The record is much too scant to support the claim that the imported articles are properly dutiable under item 712.49, and we, accordingly, proceed to consider the claim under item 664.05.
Most of the discussion in defendant’s brief is .devoted to argument that the imported articles are tubes. Defendant contends that, assuming the imported articles are “parts” of boring machinery, the tariff provision for tubes is more specific than the tariff provision for “parts” of boring machinery and must, therefore, prevail over the provision for “parts” under TSUS, General Headnotes and Rules of Interpretation 10(ij), which provides that “a provision for ‘parts’ of an article * * * does not prevail over a specific provision”.
A number of considerations lead us to conclude that item 610.52 is not a specific provision for pipes and tubes which are identifiable parts of articles. It is first of all clear, as stated in the headnote, supra, that schedule 6, part 2 is intended to cover inter alia base metals and their so-called ‘basic shapes and forms, and it is further clear that, part 2, subpart B is intended to classify so-called basic shapes and forms of iron or steel, including iron or steel in the shape and form of pipes and tubes. Schedule 6, part 2, headnote l(iv), supra., which states that it does not include in any of its subparts, including subpart B item 610.52, other articles specially provided for elsewhere in the tariff schedules, or parts of articles, is obviously intended to exclude basic shapes and forms of metal, including pipes and tubes of iron or steel, that are specially provided for elsewhere in the tariff schedules. The headnote, in our opinion, also excludes identifiable parts of an article solely or chiefly used as a part of an article provided for, with its parts, in a superior heading of the tariff schedules.
We note that the “Brussels Nomenclature”, referred to by defendant, contains a heading for pipes and tubes of iron or steel (heading 73.18) that is substantively identical to the pipes and tubes of iron or steel classified by item 610.52. The “Brussels Nomenclature” greatly influenced the arrangement of the tariff schedules.
Defendant, in citing the schedule 6, part 4 headnotes, supra, excluding from classification under item 664.05 “tubes” and “articles and parts of articles specifically provided for elsewhere in the schedules” does so without comment or discussion. We need only point out, therefore, that on this record the imported articles in the shape of a pipe or a tube are not noscitur a sociis of the class of “bobbins, spools, cops, tubes, and similar holders”,
In its last point, defendant contends that the record fails to establish that the imported articles are solely or chiefly used with boring machinery as the classifying rule for “parts” requires.
Both sides, as we mentioned above, have commented on “Brussels Nomenclature” heading 84.23 (Section XVI) which we find is substantially the same as TSUS item 664.05. Defendant would interdict the persuasive force of the Brussels note on parts under heading 84.23, with the argument that the classification of parts under TSUS is qualified by the same limitations as in Brussels which states that under Brussels, parts which in themselves constitute an article covered by Section XVI of Brussels must be classified in “their own appropriate heading” even if specially designed to work as part of a larger machine.
It should * * * be noted that many parts do not fall within the present heading since they are either:
(a) Specified elsewhere in the Nomenclature, e.g., suspension springs (heading 73.35), engines (heading 84.06, etc.) and electrical starting and ignition equipment (heading 85.08).
or
(b) Parts identical with those for motor vehicles and mainly used as such, and therefore classified as parts of motor vehicles (heading 87.06) — this applies in particular to wheels and steering and braking equipment.
Subject to the general provisions regarding the classification of parts (see General Explanatory Notes on Section XYI) ,17 other parts of the goods of the present heading are classified here, e.g.:
Gutter bars, chains and jibs for coal cutters; rotary tables, swivels, kellies, kelly drive bushings, tool-joints, drill collars, subs, drill pipe guides, stop-collars, spider bowls, split bushing slips, beams, swivel sockets, drilling jars and drill stems and pipes, for well drilling machines (rotary or percussion); blades for scrapers, coal ploughs and strippers, etc.; digging buckets and grabs for excavators, bucket ladders for multi-bucket excavators; jibs for mechanical shovels; pile-driver hammers.18 [Emphasis added.]
The protest claim under TSUS item 664.05 is sustained. Judgment will enter accordingly.
The fact that the articles contained elements of chromium and molybdenum, and the weight thereof, are not in dispute.
Schedule, part, and subpart headnotes are part of the substantive law of the Tariff Schedules of the United States.
riainttff abandoned a protest claim under TSUS item 710.34.
In rotary drilling the “[ controlled vertical motion of the tools is provided by wire line drum-type hoist with multisheave blocks in the derrick for multiplying hoisting capacity, controlling weight on the bit by partial support of the weight of drill pipe and heavy drill collars.” McGraw-Hill Encyclopedia of Science and Technology, Vol. 2, p. 295.
“The * * * [cjlinograph * * * operates electrically but is powered by batteries contained in the instrument. The deviation from the vertical is indicated by a box level gage and the direction in azimuth by a gyroscopic compass permitting its use inside steel pipe. This operation is not possible when a magnetic compass is used unless the pipe is made of special nonmagnetic steel. Since the instrument also contains a watch and a dial thermometer, a simultaneous record of amount and direction of deviation, temperature, and time can be made on 1,6-mm film. Readings are taken, both descending and ascending, at regular intervals which are preset on the instrument before it is lowered on a wire line into the well, thus providing a check on accuracy. Level gages having maximum inclinations of 20, 40, and 55 degrees' respectively are provided to be used according to the magnitudo of deviation.” McGraw-Hill Encyclopedia of Science and Technology, Vol. 10, p. 140.
Vlie complete rule is as follows :
TSUS
10. General Interpretative Rules. Vor tlie purpose of these schedules—
$***»**
(ij) a provision for “parts” of an article covers a product solely or chiefly used as a part of such article, but does not prevail over a specific provision for such part.
The “Nomenclature for the Classification of Goods in Customs Tariffs”, usually referred to as the “Brussels Nomenclature”, is one of the classification systems which “exerted the greatest influence on the arrangement of the proposed revised schedules.” Tariff Classification Study, Submitting Report, p. 8.
n. 6.
See also, Tariff Classification Study, Schedule 6, Part 2, p. 95 note “that the provisions in subpart B do not embrace iron or steel pipes or tubes prepared and coated or lined in a manner suitable for use as conduits for electrical conductors, and iron or steel fittings therefor. Such pipes and tubes or fittings would be provided for in part 5 of tchedule 6 (item 688.39 and item 688.35). The provisions of subpant B likewise do not Include flexible metal hose or tubing (see item 652.09 in part 3F of schedule 6).”
n. 7.
The Explanatory Note to the Brussels Nomenclature, Volume II, Section XV, page 654, is as follows:
In general, identifiable parts of articles are classified as such parts in their appropriate headings in the Nomenclature.
However, parts of general use (as defined in Note 2 of this Section) imported separately are not considered as parts of articles, hut are classified in the headings of this Section appropriate to them. This would apply, for example, in the case of bolts specialised for central hearting boilers or springs specialised for motor cars. The bolts would be classified in heading 73.32 (as bolts) and not in heading 73.37 (as parts of central heating boilers). The springs would be classified in heading 73.35 (as springs) and not in heading 87.06 (as parts of motor vehicles).
Explanatory Notes to the Brussels Nomenclature, Volume II, at page 672, exclusion (e).
See TSUS item 256.65, classifying tubes of paper commonly used for holding thread or yarn.
n. 6.
TSUS, General Heaclnotes ancl Rules of Interpretation, 10 (h).
Explanatory Notes to tlie Brussels Nomenclature, Vol. Ill, Section XAU, p. 766.
n. 16.
Explanatory Notes to the Brussels Nomenclature, Yol. Ill, Heading 84.23, p. 823.