Semenetz v. Sherling & Walden, Inc.

7 N.Y.3d 194 | NY | 2006

7 N.Y.3d 194 (2006) 851 N.E.2d 1170 818 N.Y.S.2d 819

BRIDGET SEMENETZ, Individually and as Parent and Guardian of SEAN SEMENETZ, an Infant, Appellant,
v.
SHERLING & WALDEN, INC., et al., Defendants, and
SAWMILLS & EDGERS, INC., Respondent.

Court of Appeals of New York.

Argued May 4, 2006. Decided June 13, 2006.

Powers & Santola, LLP, Albany (Michael J. Hutter of counsel), for appellant.

Goldberg Segalla, LLP, Albany (Jonathan M. Bernstein of counsel), for respondent.

Chief Judge KAYE and Judges G.B. SMITH, CIPARICK, ROSENBLATT, GRAFFEO and R.S. SMITH concur.

OPINION OF THE COURT

READ, J.

A corporation that purchases another corporation's assets is not liable for the seller's torts, subject to four exceptions outlined in Schumacher v Richards Shear Co. (59 NY2d 239 [1983]). Plaintiff Bridget Semenetz asks us to revisit Schumacher to endorse a fifth exception—the "product line" exception in cases of strict products liability. For the reasons that follow, we reject the "product line" exception.

I.

In May 1998, defendant S & W Edger Works, Inc., an Alabama corporation, sold a 10,000-pound band sawmill^[1] to Semenetz Lumber Mill, Inc., located in Jeffersonville, New York. The sawmill, which cost $45,000, was capable of sawing logs 36 inches in diameter and 20 feet long. On July 26, 1999, Sean Semenetz, an infant, caught his right hand and fingers between a sprocket and chain apparatus in the sawmill, causing partial amputation of several fingers.

On October 5, 2000, Edger Works sold most of its assets, including real property, goodwill, trade names and inventory, to Sawmills & Edgers, Inc., another Alabama corporation, for $300,000. The purchase contract documents expressly stated that "[t]he Buyer [Sawmills] assume[d] none of the Seller's [Edger Works] liabilities except for the receipt of and payment of ordered but undelivered inventory," as listed in an attachment. On October 6, 2000, Edger Works changed its name to Sherling & Walden, Inc. Sherling & Walden paid Edger Works' outstanding corporate debts in the months after the closing.

Sawmills manufactured sawmills at the same plant in Alabama where Edger Works had formerly produced them, and retained at least some of Edger Works' former employees. Its advertising described Sawmills as "formerly S & W Edger Works," stating that it "opened [its] doors for business in 1990," which is the date Edger Works first sold its products in the marketplace. Sawmills has made only two sales in New York, both to Semenetz Lumber at its request and for less than $100.

On April 15, 2002, plaintiff commenced this action for damages on behalf of her infant son, naming Sawmills, Edger Works and Sherling & Walden as codefendants in causes of action alleging strict products liability; negligent design and manufacture; breach of duty to warn; and breach of warranty. She also asserted a cause of action against Semenetz Lumber for failure to maintain safe premises.

In its answer, Sawmills pleaded lack of personal jurisdiction as an affirmative defense; Sawmills subsequently moved for summary judgment dismissing the complaint and all cross claims on this ground. Before deciding the motion, Supreme Court ordered further discovery on the issue of personal jurisdiction, noting that there was, in fact, long-arm jurisdiction over Edger Works, which had sold and shipped the sawmill to Semenetz Lumber in 1998.

Supreme Court denied Sawmills' motion for summary judgment. The court first turned to our decision in Schumacher to support the proposition that "while, in general, a corporation which acquires the assets of another is not liable for the torts of the predecessor corporation, there [are] exceptions to the rule." These exceptions arise where a successor corporation "expressly or impliedly assume[s] [its] predecessor's tort liability"; or "there [is] a consolidation or merger of seller and purchaser"; or "the purchasing corporation [is] a mere continuation of the selling corporation"; or "the transaction is entered into fraudulently to escape such obligations" (Schumacher, 59 NY2d at 245). The court determined that Sawmills did not fit within any of the four Schumacher exceptions, but that this did not end its inquiry in light of the Appellate Division's decision in Hart v Bruno Mach. Corp. (250 AD2d 58 [3d Dept 1998]).

Supreme Court read Hart as expanding Schumacher to encompass two additional exceptions in cases alleging strict products liability—the "product line" exception, which the Appellate Division expressly espoused in Hart, and the "continuing enterprise" exception, which Supreme Court concluded that the Appellate Division had impliedly adopted in Hart. The court held that "under both ... exceptions, [Sawmills] is a successor to [Edger Works] and is subject to [] long-arm jurisdiction here." Sawmills appealed.

The Appellate Division first determined that "there can be no jurisdiction here based on the `corporate presence doctrine' or New York's long-arm statute" (21 AD3d 1138, 1139 [3d Dept 2005] [citations omitted]). The "corporate presence" doctrine was not satisfied because Sawmills was a nondomiciliary corporation and was not doing business in New York. New York's long-arm statute did not reach Sawmills because it came into existence after the infant's accident, and therefore did not engage in any tortious conduct causing his injuries. Similarly, assuming Sawmills had a duty to warn, the duty did not arise until after Sawmills acquired Edger Works' assets, which took place after the infant's accident. Nor was there any evidence that Sawmills derived substantial revenue from interstate commerce.

Next, the Appellate Division acknowledged that Hart had adopted the "product line" exception, which the First Department later rejected in City of New York v Pfizer & Co. (260 AD2d 174 [1st Dept 1999]), and which we had "not yet embraced" (21 AD3d at 1140). The Court did not determine whether Sawmills fit within the "product line" exception, however, because

"[t]he `product line' and `continuing enterprise' exceptions to the successor liability rule deal with the concept of tort liability, not jurisdiction. When and if either exception is found applicable, the corporate successor would be subject to liability for the torts of its predecessor in any forum having in personam jurisdiction over the successor, but the exceptions do not and cannot confer such jurisdiction over the successor in the first instance. While we recognize that in certain circumstances a successor corporation may inherit its predecessor's jurisdictional status, the facts of the subject case do not fit within such a scenario" (id. at 1140-1141 [internal quotation marks and citations omitted]).

Accordingly, the Appellate Division reversed so much of Supreme Court's order as denied Sawmills' motion for summary judgment, granted the motion and dismissed the complaint against Sawmills. We granted plaintiff permission to appeal^[2] and now affirm, but on a different ground altogether.

II.

The "product line" exception to the general rule against successor liability originated with the California Supreme Court's decision in Ray v Alad Corp. (19 Cal 3d 22, 560 P2d 3 [1977]). In Ray, the court imposed liability on the successor corporation for an injury sustained by a plaintiff who fell off a ladder manufactured by its predecessor. The court concluded that successor liability was proper because "a party which acquires a manufacturing business and continues the output of its line of products under the circumstances here presented assumes strict tort liability for defects in units of the same product line previously manufactured and distributed by the entity from which the business was acquired" (19 Cal 3d at 34, 560 P2d at 11).

The court articulated three rationales for the "product line" exception:

"(1) the virtual destruction of the plaintiff's remedies against the original manufacturer caused by the successor's acquisition of the business, (2) the successor's ability to assume the original manufacturer's risk-spreading role, and (3) the fairness of requiring the successor to assume a responsibility for [its predecessor's] defective products that was a burden necessarily attached to the original manufacturer's good will being enjoyed by the successor in the continued operation of the business" (19 Cal 3d at 31, 560 P2d at 9).

As for the Ray court's first rationale—the virtual destruction of the products liability plaintiff's remedies against the original manufacturer—this "is not a justification for suing the successor, but rather ... merely a statement of the problem.... More than just a statement of the problem is required to justify a change in the corporate law" (Fish v Amsted Indus., Inc., 126 Wis 2d 293, 305-306, 376 NW2d 820, 826 [1985] [rejecting "product line" exception]).

As the Wisconsin Supreme Court has pointed out, the successor may lack capacity to spread the risk of injuries because

"[s]mall manufacturers have a difficult problem obtaining products liability insurance and find it impossible to cover the risks by raising prices because they have to compete with large manufacturers who can keep the price down.... [I]t is one thing to assume that a manufacturer can acquire insurance against potential liability for its own products and another to assume it can acquire such insurance for the products made by a different manufacturer" (Fish, 126 Wis 2d at 308, 376 NW2d at 827 [internal quotation marks and citations omitted]).

As for whether liability should be imposed upon the successor corporation because it enjoys the benefit of its predecessor's goodwill,

"any benefit the successor acquired through the goodwill or reputation of the predecessor's product line was considered and negotiated for at the time of the sale and constituted part of the sale price. To hold the successor liable for defects in products manufactured by the predecessor would be forcing the successor to pay twice for ... goodwill" (Fish, 126 Wis 2d at 309, 376 NW2d at 828).

Importantly, the "product line" exception threatens "economic annihilation" for small businesses (Bernard v Kee Mfg. Co., Inc., 409 So 2d 1047, 1049 [Fla 1982] [rejecting "product line" exception]). Because small businesses have limited assets, they face potential financial destruction if saddled with liability for their predecessors' torts. This threat would deter the purchase of ongoing businesses that manufacture products and, instead, force potential sellers to liquidate their companies. As the Florida Supreme Court has observed, 90% of the nation's manufacturing enterprises are small businesses, and "[i]f small manufacturing corporations liquidate rather than transfer ownership, the chances that the corporations will be replaced by other successful small corporations are decreased" (409 So 2d at 1050, citing Note, Products Liability and Successor Corporations: Protecting the Product User and the Small Manufacturer Through Increased Availability of Products Liability Insurance, 13 UC Davis L Rev 1000, 1002-1003 [1980]).

Further, extending liability to the corporate successor places responsibility for a defective product on a party that did not put the product into the stream of commerce. This is inconsistent with the basic justification for strict products liability,

"which is to place responsibility for a defective product on the manufacturer who placed that product into commerce. The corporate successor has not created the risk, and only remotely benefits from the product. The successor has not invited usage of the product or implied its safety. Since the successor was never in a position to eliminate the risk, a major purpose of strict liability in modifying a manufacturer's behavior is also lost" (Bernard, 409 So 2d at 1050 [citations omitted]).

In short, adoption of the "product line" exception would mark "a radical change from existing law implicating complex economic considerations better left to be addressed by the Legislature" (City of New York, 260 AD2d at 176, citing Restatement [Third] of Torts: Products Liability § 12, Comment b, and Reporters' Note thereto).

We therefore join the majority of courts declining to adopt the "product line" exception (see generally 1 American Law of Products Liability 3d § 7:27 [collecting cases]; see also 15 Fletcher, Cyclopedia of the Law of Private Corporations § 7123.30 [perm ed]). Sawmills does not fit within any of the four Schumacher exceptions, and therefore cannot be liable for Edger Works' allegedly tortious conduct.

Accordingly, the order of the Appellate Division should be affirmed, with costs.

Order affirmed, with costs.

NOTES

[1] A sawmill is a machine for cutting logs into rough-squared sections or into planks and boards as they move past the saw on a feeder table (see "sawmill," Encyclopædia Britannica Online, ). The cutting tool of a band sawmill is an endless flexible steel band with teeth on one edge; the band is carried on two large-diameter rotating wheels mounted on parallel axes some distance apart (see "sawing machine," Encyclopædia Britannica Online, ).

[2] On this appeal, plaintiff no longer relies upon the "continuing enterprise" exception. Because we do not adopt the "product line" exception, we need not and do not address plaintiff's argument that personal jurisdiction may properly be imputed to a successor corporation whenever it is substantively responsible for its predecessor's allegedly tortious conduct.