147 S.E.2d 177 | N.C. | 1966
SAYLES BILTMORE BLEACHERIES, INC.
v.
William A. JOHNSON, Commissioner of Revenue of the State of North Carolina.
Supreme Court of North Carolina.
Van Winkle, Walton, Buck & Wall and Herbert L. Hyde, Asheville, for plaintiff.
*178 Atty. Gen. T. W. Bruton and Deputy Atty. Gen. Peyton B. Abbott for defendant.
WILLIAM B. RODMAN, Emergency Judge.
Plaintiff asserts it is engaged in manufacturing, hence its income tax liability is measured by G.S. § 105-134(6)a. Defendant asserts liability must be determined by the use of the single factor of gross receipts as required by subsection f. If plaintiff is principally engaged in manufacturing, it was not liable for the income tax assessment.
The parties stipulated:
"5. During all of the years 1957, 1958 and 1959 the plaintiff was engaged in the State of North Carolina in operating a textile finishing plant and in finishing textile goods owned by others, on a contractual basis. The finishing of textile goods is an integral part of the operation of converting raw material (consisting of greige goods, dirty and unusable, as they come from the weaving mills) into finished textile goods which are fit for use, with qualities and characteristics not possessed in the greige, unfinished form. In finishing goods the plaintiff performed upon such unfinished materials the following operations:
(a) SingeingThe removal of hairy or fuzzy surface of the cloth by gas flame;
(b) Removal of sizinga chemical process for removal of starches used for sizing, which is placed in the goods by the weaver in order to make fibers less brittle and to increase the weaving efficiency; the operation consists of changing the starches to sugar which can then be dissolved and relatively easily removed;
(c) Scouring or boiling
(i) White goods, boiled under high pressure in an autoclave or kier, to destroy motes (specks of dirt and fragments of dead cotton) and pectin (a natural gum or wax);
(ii) Colored goods, repeated scouring with water and detergents at a temperature of about 160 deg.
(d) Bleachingin case of white goods, use of peroxide or choride, including a number of rinsings performed in varying ways.
(e) Mercerizingimpregnation with caustic, with the fabric placed, while wet, on a tenter frame to give correct and uniform width and to apply tension during process of rinsing and drying, resulting in an added silky lustre, and making the fabric more workable, stronger and more receptive to dyes.
(f) Finishing and dyeing
(i) White goodsgo into mangles with blueing added to give exactly the shade of white desired by customer, exact materials used affecting the finished quality;
(ii) Dyed goodsdifferent methods used to get desired color when dry;
(iii) Both kindsvarying finishing operations and procedures to give required softness, stiffness or whatever finish wanted, resin finishes, etc.
(g) Calenderingat various points, to give required surface, smooth, rough embossed, soft or stiff. Operations are performed upon certain goods in such a way as to create the following finished fabrics:
(i) Corduroyits creation basically and principally involves a mechanical operation (combined with other steps in finishing) resulting in a desirable cotton fabric having a piled surface, raised in cords, ridges or ribs.
(ii) Plisséa cotton crepe material, crinkled by mercerizing in stripes (achieved by the application of chemical *179 process) to give somewhat the same effect achieved in seersucker by the weaving operations.
(iii) Crease-resistant goodstreatment during the various stages of finishingconverting ordinary rough, easily crumpled goods into a fine, smooth fabric which resists creasing.
(iv) Non-shrinking goodsagain, converted to this condition by various treatments in the operation of finishing.
(v) Lawns and organdiesmechanically these two fabrics are the same construction when they come from the weaver and they can take either of two courses to the finished goods statelawns wind up, however, as very soft sheer fabrics while organdies wind up as permanently stiff fabrics completely resistant to subsequent softeningwhen the finishing is completed lawns and organdies are two entirely different fabrics."
When courts are called upon to interpret legislative intent, the words selected by the Legislature should be given their generally accepted meaning unless it is manifest that such definition will do violence to legislative intent. Byrd v. Piedmont Aviation, Inc., 256 N.C. 684, 124 S.E.2d 880; Southeastern Baptist Theological Seminary, Inc. v. Wake County, 251 N.C. 775, 112 S.E.2d 528.
Webster defines the word "manufacture" as: "Something made from raw materials by hand or machinery; * * * the process or operation of making wares or other material or products by hand or machinery; * * * a productive industry using mechanical power and machinery; * * * the act or process of making, inventing, devising, or fashioning." "Manufacturing" is defined as: "(1) to make (as raw material) into a product suitable for use (the wood * * * is manufactured into fine cabinetwork). (2) to make from raw materials by hand or machinery." "Manufacturer" is defined as: "an employer of workers in manufacturing; the owner or operator of a factory; * * * one who changes the form of a commodity, or who creates a new commodity." Other lexicographers agree with the Webster definitions. Bouvier's Law Dictionary, Rauls Revision; 55 C.J.S. Manufacturers § 1, p. 672.
It is sometimes difficult to draw the line marking a change from a raw material to a finished product. The subject is dealt with at length in In Re Rheinstrom & Sons Co., 6 Cir., 207 F. 119; Assessors of Boston v. Commissioners of Corporation and Taxation, 323 Mass. 730, 84 N.E.2d 129; Central Trust Co. of Illinois v. George Lueders, 6 Cir., 221 F. 829; Commonwealth v. Meyer, 180 Va. 466, 23 S.E.2d 353; Commonwealth v. Peerless Paper Specialty, 344 Pa. 283, 25 A.2d 323; Moore v. Farmers Mutual Mfg. & Ginning Co., 51 Ariz. 378, 77 P.2d 209.
The business of manufacturing an article is essentially different from that of selling the article after it has been manufactured. Caffee v. City of Portsmouth, 203 Va. 928, 128 S.E.2d 421. As said in Bedford Mills v. United States, Ct.Cl., 59 F.2d 263: "There are many manufacturers who do not themselves make all the elements that go into their finished products, but have them made by others. * * * If A conceives the possibility of applying to gray goods a finishing process which will convert the rough, unfinished gray goods into an article of commerce different from ordinary gray goods, and in virtue of such an idea a new form of textile is placed upon the market, it seems to us that A is as much a manufacturer under the tax law as if he himself performed the physical labor of creating the product. It is true, generally speaking, we would say B and C, whose combined efforts produced the finished product, are the manufacturers * * *."
The parties have stipulated and the court has found as a fact that plaintiff "was engaged *180 * * * in operating a textile finishing plant and in finishing textile goods owned by others, on a contractual basis. The finishing of textile goods is an integral part of the operation of converting raw materials * * * into finished textile goods which are fit for use, with qualities and characteristics not possessed in the greige, unfinished form. * * * Operations are performed upon certain goods in such a way as to create the following finished fabrics:" Then follows an enumeration of five different kinds of goods, each having different characteristics.
Plaintiff under the facts stipulated is a manufacturer as that word is generally understood. We hold that plaintiff is principally engaged in the manufacture of tangible personal property. The mere fact that it receives a fixed stipend for changing the raw material into a finished product does not change its business from that of manufacturing. It follows that plaintiff's income tax was properly computed by it as provided in G.S. § 105-134(6)a, and not under subsection f of that statute, as defendant contends.
The statute, G.S. § 105-122, making plaintiff subject to a franchise tax is substantially similar to the statute relating to income taxes. The State does not challenge the correctness of plaintiff's computation of its franchise tax if in fact it was a manufacturer. Having so held, it follows that the assessment of an additional franchise tax was invalid.
The assessment of additional income and franchise taxes was an illegal assessment.
Plaintiff does not and has not sought relief under the provisions of G.S. § 105-134(6)g. Its position is and has been that the assessment was an invalid assessment. It paid the tax under protest, made proper demand for refund, and when the State declined to refund, it brought suit. It followed strictly the statute, G.S. § 105-267, authorizing the recovery of taxes illegally assessed.
Affirmed.
MOORE, J., not sitting.