53 F. 916 | U.S. Circuit Court for the District of Northern Ohio | 1892
This is a suit in equity on patents Nos. 426,-067 and 444,652, issued to complainant, Henry Roberts, against the respondent, the H. P. Nail Company, for injunction against further infringement and for damages. The defenses are want of novelty, invalidity of the claims, and noninfringement. The apparatus which, is the subject-matter of this controversy, and for which the coin-», plainant’s patents were issued, is for coiling metal rods, to be subsequently drawn out into metal wire of the required sizes. The metal rods are made from a metal billet, only a few feet in length, of very
In the mode of coiling or reeling the rod in use until a few years ago workmen seized the rod as it came from the last set of rollers, and inserted the end in a reel running at a speed slightly greater than that of the last rollers, so that the loops in the rod, caused by the delay in inserting the end, should be taken up. It is easy to see that with the speed at which .the rod runs, the operation would be a difficult one for the workmen, and attended with great danger. It was likely also to result frequently in snarling the rod, and thereby to destroy its value for wiredrawing purposes. 'To meet the difficulties of this method, a number of devices were patented before the date of Mr. Roberts’ application. Of these there were two kinds. One may be known as “pipe coders” and the others as “reel coders.”
The first class is well dlustrated by the Matteson patent. In this device a guide tube, fitting close to the last set of rollers, opposite the point where the rod is delivered, is curved at its other end, so that after receiving ‘the rod it conveys it downward into a delivery tube or lay off, having the form of a compound curve, with the delivery end tapered transversely, and hung in a frame, so as to permit its rotation by belt or cog or other suitable gearing. The lower part of the lay-off or curved pipe travels about the periphery of a drum situated beneath it. As the rod goes through the guide tube it enters the rotating, curved lay off, and is by that delivered and poiled about the circumference of the drum beneath. When the rod is run ., out, and is all coiled, it is removed by a suitable appliance. ■ The rotating lay-off pipe appears in the Rusbach patent, in the Daniels patent, in the Young patent, in the Lenox patent, and in the Morgan and Daniels patent. The curve of the lay-off pipe varies somewhat in these other patents from that in the Matteson patent, but the operation in coiling the rod is substantially the same.
The reel coiler is seen in the Morgan patent. Here the rod is delivered from the mouth of a fixed pipe into a rotating channel, made up of fingers or posts fixed in a rotating plate and arranged in the1 form of two concentric circles. The rotating plate and fingers operate exactly as an ordinary reel does, and takes up the rod
In the specifications of the first patent Roberts used this language:
“The coiler, B, consists, essentially, oí a rotary cone, which receives the metal rod at its smaller end or apex, and distributes it in a coil at the exterior of its periphery at the larger end. For the purpose of more easily governing and controlling the rod in its distribution I prefer to surround this cone with an outer concentric cone or shell, fixed to and rotary with it; but, broadly considered, my invention is not limited thereto, hut consists in a rotary distributing or coiling cone, as distinguished from rotary tubes heretofore suggested for use in coiling rods. In this specification I do not use the word ‘cone’ in its strictest mathematical sense, hut use it generically, meaning thereby a tapering body, whether it he truly conical or not.”
The claims in the first patent were as follows:
“(1) In apparatus for coiling metal, a rotary receiving and coifing cone, having a channel which receives the metal at the smaller end or apex, and delivers it at its base, in combination with mechanism for rotating the cone, substantially as and for the purposes described. (2) In apparatus for coiling*920 metal, the rotary double cone, 4, 5, having an intervening spiral rib, 6, substantially as and for the purposes described. (3) In apparatus for coiling metal, a rotary, double, hollow cone, separated by a peripheral space, through which the metal passes, substantially as and for the purposes described. (4) In apparatus for coiling metal, the combination, of a rotary, hollow, double cone, a peripheral gear wheel attached thereto, and" a driving pinion, substantially as and for the purposes described.”
In Ms second patent, Roberts dispenses with the outer cone, excepting so much of it as forms the hollow collar. This collar is connected with a single cone by means of pieces extending downward, meeting the cone just below the apex, and widening into two longitudinal ribs with lateral flanges. The ribs are on opposite sides of the cone, somewhat spiral in form, and reach down “to its base line. The rotating gearing is attached to the hollow collar-. In effect, the improvement consists in substituting for the outer cone and the one longitudinal rib of the old machine the two ribs with lateral flanges, performing the same function, in the new. By these means the machine is made simpler, lighter, less expensive, and more easily rotated, without impairing its efficiency. In addition, the rod, after it leaves the guide tube, is visible and accessible, — a feature said toi be an advantage in case of a faulty operation of the roller’s upon the rod. The claims of the second patent are as follows:
“(1) In metal-coiling apparatus, a rotary colling cone, having a longitudinal rib with a lateral flange, substantially as and for the purposes described. (2) In metal-coiling apparatus, a rotary coiling cone, having two longitudinal ribs with lateral flanges, substantially as and for the purposes described. (3) In metal-coiling apparatus, a rotary coiling cone, having an exposed outer surface, along which the rod travels, a hollow collar, and driving gear, substantially as and for the purposes described.”
Counsel. for respondent earnestly object to the validity of the first claim in the first Roberts patent on the ground that is for a single cone, with a channel, receiving the metal at its smaller end, and delivering it at its base, ‘in combination with mechanism for rotating it; while the specifications show only a double cone,— that is, show an inner cone, with a channel made up of a single rib and an outer cone. It is said that it is not permissible for a patentee to make claim for a mechanism wider than anything which is shown to be operative in Ms specifications. The other claims of the patent are for a double cone, so; that it is clear that the first claim is only for a single cone. Nevertheless I do not think that the point is well taken. In a combination patent it is permissible for the patentee, after claiming Ms whole machine, to claim also the combination of fewer parts than the whole, provided the combination of the parts is new, even if, taken alone, the combination will not result in any known useful product. This is fully established in the decision of Judges McKennan and Nixon in the case of Wells v. Jaques, 5 O. G. 364. In that case the patent was- for a combination of elements making up a hat-body machine. The combination embodied a great many different parts, and the patentee made quite a number of claims, of which one only embodied the whole machine. It was objected
‘T cannot yield assent to that proposition. The separate claims oí a patent must be construed in reference to the specifications; and, if the specifications point out the arrangements to be made, or the methods to be adopted, in connection with other instrumentalities which the inventor may not claim as new, in order to render his invention practically useful, the test to be applied is not whether the claim alone will produce a useful result, but whether it will do so supplemented, by and in connection with such designated, devices and instrumentalities.”
In 2 Rob. Pat. § 530, the principle is stated thus:
“Claims for each subordinate piece of mechanism may be joined with those for the principal machine, though not capable of use in any other known connection.”
A little reflection shows that this cannot be otherwise, in view of the strict rule applying against the patentee of a combination, on the question of infringement. The omission by the respondent from the combination off complainant of a single element, whether that be old or new in itself, defeats the claim of infringement. That patentees may properly protect what is really new in the combination, they must therefore he given the opportunity to select out a part or parts which are new, less than the whole working machine, and by their claims warn the public against the use of them in any other combination to accomplish the same general result as that for which they were used by the. patentee in his complete machine.
Now, in the first Roberts patent, if it was new (and that I shall consider later) to use a rotary receiving and coiling cone, in connection with a channel, to coil these red-hot rods, I do not see why the patentee might not secure to himself the exclusive use of such, a device without regard to the particular form of channel required to retain the rod upon the surface of the cone. The patentee has suggested one kind of practicable channel, and has demonstrated the usefulness of the inner cone for receiving and coiling purposes. If any one else should devise another kind of channel, in which the surface of the inner cone is used to receive, deflect, and coil the rod, and the suggestion of such a channel involves patentable invention, then it would be the invention of an improvement on the Roberts’ coffer, which would entitle the new inventor to a patent, but he could riot use his improvement as a channel on a rotary coiling-cone coffer without a license from Roberts. The fact is that under the case cited above Roberts was entitled to claim in rod coffers a rotary receiving and coiling cone, receiving the rod at its apex, and delivering it at its base, provided always that those parts were new. He has seen fit to narrow his claim by inserting the words, “having a channel.” It he could make a broad claim, why may he not narrow it?
We now come to the question whether the Roberts devices have been anticipated in former coiling machines. It is really not claimed with any confidence that either the Morgan or the Sweet devices are anticipations of the patents in suit, or that they contain suggestions from which Roberts’ machines could have been constructed with ordinary mechanical skill. The chief contention is that Roberts’ patents embody the principle of the various pipe reels, and particularly that of Young. It is true that in the pipe reels the course of the running rod in space from the point where it enters the lay-off pipe at its collar- to the point where it is delivered from the mouth of the pipe may be generally described as in a curved plane, resembling the surface of a cone, whose apex is at the collar of the lay-off pipe, and the circumference of whose base is described by the mouth of the pipe; the result being a coil of the rod jn a chele, the center of which is immediately under the collar of the lay-off pipe and the apex of the imaginary cone. It is also true that the rod in the Roberts machine travels in the plane of the surface of a cone from the collar where it enters the coiler to the point where it is delivered, and that it is delivered at the base in a circle the center of which is immediately under the collar and the apex of the cone. But there is no other similarity. In the complainant’s device there is a real, substantial cone. In the pipe coiler, the conical surface is imaginary, the actual contact of the rod being with the pipe. This difference is substantial. It is self-evident, and the .expert testimony shows it to be the result in practice, that a rod, running as rapidly as 1,500 feet a minute, with its end frequently roughened and jagged, with the wavy motion which the rod in its red-hot condition usually has, is liable to scrape and jam and kink in the pipe, and will twist excessively in the coil by reason thereof. In the complainant’s device the rod has the whole half surface of the cone to play upon, and it is only confined by the channel made by the surface of the cone and the rib, which the rotation of the cone brings the rod up against. In the complainant’s device the receiving and coiling are done by the surface of the cone and the rib. In the pipe coffers the receiving and coiling are done by a pipe. Only in the most general sense can the two be said to operate in the same way. The use of the surface of the cone with the rib
In the Young patent, so much relied on, instead of one curved rotating- lay-off pipe, through which the rod is carried, there are six, arranged at equal distances around the mouth of the guide tube leading from the rollers, in such a manner that their lower mouths are in the circumference of a circle above and about the coiling drum, and their upper mouths are so adjusted that either one may be made continuous with the guide tube, and carry the rod down to he laid off, as in the Matteson coiler, already described. Only one of these six j>ipes can he used at a time. The advantage in the six is in preventing the wear upon one pipe, which is found to he great in all the devices where single lay-off pixies are used. By changing the guide tube from one to another of these rotating lay-offs, the wear and tear are reduced one sixth on each pipe. Moreover, the other five pipes ant a.s a balance in the rotation, of the machine, so as to make it steadier. The patentee, in order to secure firmness, lias connected together these six pipes, and covered them, so that the outside of the coiler has the appearance of a cone, and, when the pipes rotate, the cone, of course, rotates. Here is said to he a rotating and coiling cone, with a channel which receives the rod at ifs apex, and delivers it at its base, —a, complete anticipation of 1he complainant’s device and his first claim. The resemblance between the Young patent and the complainant’s is only in form. The Young patent is purely a pipe coiler. The mere accident, that six púpes, incorporated for relay purposes, should be inclosed in a conical covering, docs not make the machine any more like Iho complainant’s device than if there were hut one pipe, and that not covered at all. The surface of the cone is not used to receive, dellect, and deliver the rod. There is no rib which catches the rod and coils it on the periphery of the base of the cone. The rod is still confined to the pipe, and does not run upon, and is not supported by, the surfa.ee of the cone in anv other than the imaginary sense in which it may be said that the pipe itself, describing a conical surface in its rotation, is such a, surface. The objections to the use of the curved lay off or pipe are the same in the Young as, in the Matte-son patent, and the advantage over the Young patent, found in the complainant’s patent, is the same as over all kindred devices.
A somewhat refined argument is made by counsel for respondent to .support the claim, that the Young device is an anticipation of the Roberts first machine, based on the language of the first claim. It is said that the pipes of the Young patent are channels running down the surface of a cone, and ihat, therefore, the Young patent is plíánly a rotating, receiving, and coiling cone, having a channel, receiving the rod at its apex, and delivering it at its base. If the complainant’s machine has in it something new, not suggested by anything known, and a claim has been made wide enough, to cover the discovery and something- more which was known, it is the duty of the court to so construe the claim, if possible, as to include only the new
Counsel for respondent contends that rotating cones are old for coiling purposes, and refers to the statement of a patent-office examiner in rejecting the original claim made by Roberts under this first patent as proof of it. The original claim was as follows:
“In apparatus for coiling metal, a rotary cone, which receives the metal at the smaller end, or apex, and delivers it at its base, substantially as and for the purposes described.”
To this the examiner replied:
“Claim one is objected to because it does not appear to point out any invention in view of the fact that cones are common things in coiling machines, and also because no particular reference is made to what application shows and describes.” ■
—Whereupon the claim was amended and allowed, as we have seen .above. Tne examiner does not say that rotary cones are common in coiling machines, but only that cones are so. He does not say how such cones were used, or whether their operation was like that of the complainant. On the contrary, the fact that the first claim was allowed in this modified form is the prima facie evidence that there had been no rotary cones used as the complainant used them in his coiling machine. If there were any coiling machines having a rotary cone, the surface of which was used to receive, deflect, and, in connection with the channel, to coil wire, rope, or other material, counsel should have introduced evidence of the existence of such machines. The court cannot assume it from the language of the patent-office examiner. I have no difficulty whatever in finding on the evidence adduced that the defense of want of novelty against the complainant’s patents is not made out. Mr. Roberts’ invention is a distinct step in the art.
What has been said on the question of novelty had application to the first patent. The second patent was, as we have found, an improvement on the first. It was charged in the answer that this second patent was really not an invention of Roberts, but that, he surreptitiously obtained knowledge of the device from one Mdlvried, who was its real discoverer. This charge was withdrawn in open court, and needs no notice. The validity of both patents is clear.
Upon the question of infringement there is no difficulty. The defendant uses a cone with two wings extending radially from the
“In metal-coiling apparatus, a rotary coiling cone, having two longitudinal libs with lateral flanges, substantially as and for the purposes described.”
Respondent* in his answer, sot up a license to use the machine which he was using, from Mcllvried and Chisholm, the owners of the Mcllvried patent. The Mcllvried patenl, so far as it relates to the device already described, is clearly an infringement of the second claim above. Counsel for respondent practically admits that it is. The evidence leaves little doubt that Mcllvried sa,w the first Roberts device in operation, and the model of the second device, before he made his application, and that he simply copied the improvement in the second machine. The device of ihe Mcllvried patent has ribs wider than the Roberts machine, bub it has tlie lateral flanges of that device on the exterior edge of these ribs. During the pendency of the suit the respondent cut off the lateral flanges, and now the court is vigorously pressed with the argument that, in the absence of the flanges, though the device is ihe same in every other respect, there is no infringement. The point has no merit. The wings of the. Mellvried coiler correspond exactly to lie ribs of the Roberts second patent. The necessity for lateral flanges in the Mcllvried machine has been obviated by widening the ribs into wings, and by making the angle at which they meet the surface of the cone somewhat more acute. The widening of the wings and the lessening of the angle ai*e purely mechanical equivalents of the lateral flanges of tlie longitudinal ribs in the Roberts second patent, and would suggest 1 hem sel ves to a mechanic or any other person at all familiar with, the operation of the machine. It follows, therefore, that in any view Die machine of the respondent is an infringement of both the Roberts patents.
The finding will he against the respondent, sustaining the validity of the patents, and finding that the respondent has infringed them, with, a decree for perpetual injunction, and with the usual reference to a master for an accounting.