701 N.Y.S.2d 386 | N.Y. App. Div. | 2000
—Order, Supreme
While operating a printing press manufactured and sold by defendants, one of plaintiffs fingers became lodged in the press and was severed. At the time of the accident, the press was being operated without the safety guard with which it had been equipped by the manufacturer. Although defendants maintain that the removal of the safety guard constituted a material alteration of the press subsequent to its manufacture and sale cutting off their liability for the alleged product defect (see, Robinson v Reed-Prentice Div., 49 NY2d 471, 480), the evidence on the motion established that the safety guard was designed to be removed from the press with relative ease to facilitate periodic press maintenance. The motion court correctly held that the removal of a safety guard designed to be readily removed did not constitute a material alteration. Also correct was the court’s finding that the affidavit of plaintiffs expert raised triable issues as to whether a press such as the one at issue, designed so as to be operable without a safety guard, was reasonably safe for its intended uses when placed in the stream of commerce (see, Lopez v Precision Papers, 107 AD2d 667, 669, affd 67 NY2d 871). Plaintiff’s cause of action predicated on defendants’ failure adequately to warn of the danger of operating the press without a safety guard was properly dismissed since the evidence showed that there were two prominently placed warnings of that danger on the press. Concur—Rosenberger, J. P., Mazzarelli, Wallach and Saxe, JJ.